OCT-M 汽油选择加氢工艺工业应用

介绍了OCT-M汽油选择性加氢技术在汽油加氢装置的应用情况。对影响加氢汽油质量的主要因素进行了分析，提出了降低加氢过程汽油辛烷值损失、降低大分子硫醇生成的优化措施，并针对存在的问题提出了相应的改进建议。     

科尔沁区清河镇HFC网络设计方案

介绍通辽市科尔沁区清河镇有线电视发展的现状,提出清河镇有线电视网络的规划设计方案,对网络指标进行具体验算,并简要分析网络建设中光缆路由的敷设方式。     

PLC陶瓷工业窑炉可靠性及自动巡检功能设计

介绍了由PLC组成的陶瓷刀具高温烧结窑的热工系统控制及自动故障巡检功能 ,讨论了系统设计中的主要环节及出现的问题     

埕岛油田中低含水期提注开发试验

埕岛油田是河流相疏松砂岩油藏,初期采用温和注水政策,压力降低、液量下降等开发矛盾逐步暴露。为实现海上油田的高速高效开发,通过油藏数值模拟计算和分析,提高注采比可有效提高水驱效果,提高采油速度,实现高速高效开发。2005年7月井区开始提注,提注后对应受效油井出现明显增油效果,液量不断上升,开发形势明显好转。     

可编程控制器在捆扎机自动控制中的应用

介绍了一种用可编程控制器（PLC）实现捆扎机自动控制的设计方案，详细地介绍了设计过程，给出了完整的程序流程图和部分控制程序。     

灯泡贯流式机组发电机冷却装置技术改造方式的探讨

灯泡贯流式发电机组直径小,转速低,发电机的通风冷却是一个难点。通过对京南、马骝滩、石面坦及南津渡等水电站的发电机运行过程中出现的温升过高,定子线棒绝缘受损等问题的分析,提出了解决的措施与改进方案,并对灯泡贯流式机组冷却系统的设计提出了建议,可供参考和借鉴。     

Phase equilibria of quasi-binary systems consisting of multicomponent polymers 1 and 2. IV: Poly(ethylene oxide)/poly(propylene oxide) systems

To confirm the reliability of the theory of phase equibria of multicomponent polymer 1/multicomponent polymer 2 systems (i.e. quasi-binary systems) and the method of computer experiment based on this theory (Brit. Polym. J., 23 (1990)285; 23 (1990)299; Polym. Int., 29 (1992)219), could point curves (CPC), two-phase volume ratios ( R ) and critical solution points (CSP) have been determined experimentally for the quasi-binary mixtures of poly(ethylene oxide) (M¯_w = 647, M¯_w/M¯_n = 1.15; M¯_w and M¯_n, the weight-average and numberaverage molecular weights, respectively) and poly(propylene oxide) (M¯_w = 2028, M¯_w/M¯_n = 1.08; and M_w = 2987, M_w/M_n = 1.13). The hydroxyl end groups of both polymers were methoxylated in advance by the Cooper & Booth method (Polymer, 18 (1977)164). The thermodynamic interaction parameter between both polymers, χ₁₂, and the concentration dependence parameters for the above quasi-binary systems were determined by the method proposed in a previous paper (Brit. Polym. J., 23 (1990)299). CPC, R and CSP values calculated on the basis of the theory are in good agreement with the values determined experimentally.     

Numerical simulation of slider dynamics during slider–disk contact

In this paper, the dynamic behavior of pico slider in contact with the disk was calculated. The analysis model consists of a simplified suspension model, an air bearing model, and a slider–disk contact model. The contact model consists of two elements. One is surface roughness model measured by Atomic Force Microscope (AFM) and the other is micro-waviness model. The dynamic behaviors of the tri-pad slider are calculated at several rotation speeds to investigate slider vibration modes during slider–disk contact. The slider oscillation frequency depends on the rotation speed and it saturates about twice as much as eigen frequency of air bearing pitch mode.     

Applications of Level 2 BLAS in the NAG library

We describe work done to improve the performance of NAG Library routines for nonlinear equations and nonlinear least squares problems on vector-processing machines. Calls to the Level 2 BLAS routines for matrix-vector operations were introduced wherever possible, so that further efforts to tune the code could be concentrated within the Level 2 BLAS, and advantage can be taken of optimized implementations of the Level 2 BLAS when they become available. Performance measurements from a CRAY-1S, an AMDAHL VP1100, and a CDC CYBER 205 are presented to illustrate the effectiveness of this strategy.     

IMPINGING JET DRYER

In coating and gravure printing, an impinging jet nozzle with high thermal efficiency for drying of coated film was developed.

Trial production 0f 40 kinds of nozzle enables to develop a high-performance impinging jet nozzle with heat transfer coefficient 1.5 times larger than that of current slit nozzle, through measurement of heat transfer coefficient, visualizations of air flow and heat transfer, and measuremenu of jet velocity and turbulence distribution. The purpose of the trial production was to expand a range of high heat transfer and promote turbulence compared with the current nozzle.

Paying attention to mass transfer within gravure ink coated film, drying characteristic of the film was analyzed by numerical solution of a set of equations governing the drying process in which concentration dependencies 0f the diffusion coefficient and the equilibrium vapor pressure were considered.

Applying these analyses. an industrial scale dryer with excellent drying efficiency has finally been developed.