Crystallization and spectroscopic properties in Er3+ doped oxyfluorogermanate glass ceramics containing Na

The Er³⁺ doped oxyfluorogermanate glasses, with a composition containing Na element, were synthesized by the conventional melting–quenching technique. When Na element was introduced into the composition of oxyfluorogermanate glass, the crystals behavior was investigated in details. Depending on the annealing procedure supplied, thermal annealing of precursor glasses in the system GeO₂/BaF₂/AlF₃/Na₂O/NaF/ZnO/GdF₃/ErF₃ led to the precipitation of different crystal phase nanocrystals. It was confirmed the nanocrystals in GC600 is orthorhombic NaBaAlF₆ which led to enhance obviously in the UC luminescence of Er³⁺. However, the nanocrystals in G585 led to decrease in the UC luminescence, which indicated few Er ions enter into the lattice of this nanocrystal phase. The reason of the decrease in UC emission intensity of GC585 was analyzed.     

Ni,Cr, and Fe surfaces corroded by molten ZnCl2

Understanding the corrosion of molten ZnCl₂ on metal surfaces is significant for the corrosion protection of metals, sustainable use of molten salts, preparation of ZnO coatings, and so on. In this paper, surfaces of pure Ni, Cr, and Fe corroded by molten ZnCl₂ were investigated. The results show that Ni suffered very slight corrosion, while Cr experienced more serious corrosion than Ni, but lighter corrosion than Fe. The morphology of the corrosion of Cr and Fe, respectively, presented pitting and intergranular corrosion characteristics. Furthermore, nanostructured ZnO coatings were obtained on the surfaces of Ni and Fe, but not on the surface of Cr. The ZnO coating on the Ni surface was doped with a small amount of Zn₅(OH)₈Cl₂, and the ZnO coating on the Fe surface was doped with ZnFe₂O₄ and Zn₂OCl₂. The coatings on the Ni and Fe surfaces had an average thickness of 1.5 and 50 μm, respectively.     

异喹啉的脉冲辐解和激光光解研究

用脉冲辐解和激光光解相结合,研究了异喹啉这种难降解杂环化合物在紫外光作用下的变化和与HO·的反应.结果表明,在波长为266nm的激光作用下,异喹啉不仅发生光激发,而且发生单光子电离,其量子产额为1.58×10-4.异喹啉光电离产生的阳离子自由基可以脱去质子,其pKa为5.50.异喹啉可以与HO·发生反应,其反应速率常数为3.4×109 mol-1·dm3·s-1.本工作的研究将为photo-Fenton法降解异喹啉提供理论上的依据.     

Dielectric and piezoelectric properties of Pb(Ni1/3Nb2/3)O3–PbTiO3–PbZrO3 ceramics modified with bismuth and zinc substitutions

The dielectric and piezoelectric properties of the (Pb_0.985Bi_0.01)(Ni_1/4Zn_1/12Nb_2/3)_x- (Zr_σTi_1-σ)_1-xO₃ piezoelectric ceramic system (0.2 ≤ x ≤ 0.7, 0.1 ≤ σ ≤ 0.9) were systematically investigated. The results showed that, after poling, the dielectric constant, ε ₃₃ ^T , increased for the tetragonal compositions but decreased for the rhombohedral compositions. Furthermore, high values of ε ₃₃ ^T and piezoelectric modulus, d ₃₁ were found for the compositions along the extension of the morphotropic phase boundary. The highest values of the planar electromechanical coupling factor, K _p, and the piezoelectric modulus, d ₃₁, were found to be 0.70 and − 274 × 10^-12 C N^-1, respectively. The Curie temperature, remanent polarization, coercive field and the lattice constants of the a and c axes in relation to the Pb(Ni_1/3Nb_2/3)O₃ content and the Zr/Zr + Ti ratio were also determined. This revised version was published online in November 2006 with corrections to the Cover Date.     

Thermal decoloration kinetics of spirooxazines in Ormocer coatings prepared via sol-gel processing

Two free and one silylated (silane-substituted) photochromic spirooxazines are doped into organically modified ceramics (Ormocer) coatings by sol-gel processing and the thermal decoloration kinetics of these coatings are investigated and compared with the corresponding ethanol solutions and PMMA coatings. The decoloration behaviour of the two free dyes (SO-1 and SO-2) in the Ormocer coatings is similar to that in ethanol solutions, obeying a first-order mechanism and possessing almost the same decoloration rates as in ethanol. This suggests that the dye molecules encapsulated within the pores of the solid matrix are as free as those in ethanol solutions. The silylated dye (SO-3) in the Ormocer coatings, however, exhibits a considerably lower decoloration rate than the corresponding free dye (SO-1) and evident deviation from the first-order mechanism. This indicates apparently that the degree of freedom of the dye molecules is reduced by the silylation. These results are discussed on the basis of solvent polarity, porous structure of the Ormocer coating, and the dye-to-matrix connectivity.     

磷酸盐激光玻璃中铂颗粒密度与氧化还原平衡关系的研究

用吸收光谱法研究了Ｒ２Ｏ—ＢａＯ—Ｐ２Ｏ５系统磷酸盐激光玻璃中铂颗粒密度与铭的氧化还原平衡的关系。结果表明，玻璃中铂颗粒密度随平衡向右移动而减小；玻璃中平衡随熔炼气氛中氧分压增大、熔炼温度升高而向右移动，当足够大时，铂颗粒不能形成。     

Theoretical investigations on the spin Hamiltonian parameters for Er3+ ion in LiYF4

The spin Hamiltonian parameters g_∥, g_⊥, A_∥ and A_⊥ for Er³⁺ ion in LiYF₄ are investigated by using the perturbation formulas of these parameters for a 4f¹¹ ion in tetragonal symmetry. In these formulas, the contributions to the spin Hamiltonian parameters from the second-order perturbation terms and the admixtures of different states are considered. The relevant crystal field parameters are calculated from the superposition model and the local structural parameters of the Y³⁺ site occupied by impurity Er³⁺. The theoretical optical spectra within ⁴I_15/2 and ⁴I_13/2 states and the spin Hamiltonian parameters obtained in this work are consistent with the observed values.     

Technique for finding and identifying filters that cut off OTDR lights in front of ONU from a central office

We report on a newly developed in-service measurement technique that can be used from a central office to find and identify any filter in front of an ONU on an optical fiber access network. Using this system, in-service tests can be performed because the test lights are modulated at a high frequency. Moreover, by using the equipment we developed, this confirmation operation can be performed continuously and automatically with existing automatic fiber testing systems. The developed technique is effective for constructing a fiber line testing system with an optical time domain reflectometer.