Block size selection in rate-constrained geometry based point cloud compression

Multimedia Tools and Applications - In geometry-based point cloud compression, the geometry information is typically compressed using octree coding. In octree coding, the size of the blocks in the...     

Exergoeconomic performances of the desiccant-evaporative air-conditioning system at different regeneration and reference temperatures

This paper presented the exergoeconomic evaluation of the developed desiccant-evaporative air-conditioning system. The developed system was evaluated based on the steady-state conditions at different regeneration and reference temperatures. The exergoeconomic evaluation method was implemented to the system components and the whole system to evaluate the exergy efficiency, exergy destruction ratios, cost rates, relative cost differences and exergoeconomic factors. The regeneration and reference temperatures affected the exergy efficiencies, exergy destruction ratios, cost rates, relative cost differences and exergoeconomic factors. The desiccant wheel, heating coil and evaporative cooler had a high cost rate (investment cost, operation and maintenance cost, and exergy destruction cost). The exit air fan, outdoor air fan and evaporative cooler had a high relative cost difference. The exit air fan, outdoor air fan and secondary heat exchanger had a high exergoeconomic factor. Replacement of the desiccant wheel with a higher dehumidification performance could decrease the high cost rate. A higher efficiency evaporative cooler and heating coil were needed. Cheaper air fans (outdoor air fans and exit air fans) were needed.     

Demand response for home energy management system

The optimization of energy consumption, with consequent cost reduction, is one of the main challenges for the present and future smart grid. Demand response (DR) program is expected to be vital in home energy management system (HEMS) which aims to schedule the operation of appliances to save energy costs by considering customer convenience as well as characteristics of electric appliances. The DR program is a challenging optimization problem especially when the formulations are non-convex or NP-hard problems. In order to solve this challenging optimization problem efficiently, an effective heuristic approach is proposed to achieve a near optimal solution with low computational costs. Different from previously proposed methods in literatures which are not suitable to be run in embedded devices such as a smart meter. The proposed algorithm can be implemented in an embedded device which has severe limitations on memory size and computational power, and can get an optimal value in real-time. Numerical studies were carried out with the data simulating practical scenarios are provided to demonstrate the effectiveness of the proposed method.     

Nickel foam-supported Fe,Ni-Polyporphyrin microparticles: Efficient bifunctional catalysts for overall water splitting in alkaline media

Developing highly active, stable and sustainable electrocatalysts for overall water splitting is of great importance to generate renewable H₂ for fuel cells. Herein, we report the synthesis of electrocatalytically active, nickel foam-supported, spherical core-shell Fe-poly(tetraphenylporphyrin)/Ni-poly(tetraphenylporphyrin) microparticles (FeTPP@NiTPP/NF). We also show that FeTPP@NiTPP/NF exhibits efficient bifunctional electrocatalytic properties toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Electrochemical tests in KOH solution (1 M) reveal that FeTPP@NiTPP/NF electrocatalyzes the OER with 100 mA cm⁻² at an overpotential of 302 mV and the HER with 10 mA cm⁻² at an overpotential of 170 mV. Notably also, its catalytic performance for OER is better than that of RuO₂, the benchmark OER catalyst. Although its catalytic activity for HER is slightly lower than that of Pt/C (the benchmark HER electrocatalyst), it shows greater stability than the latter during the reaction. The material also exhibits electrocatalytic activity for overall water splitting reaction at a current density of 10 mA cm⁻² with a cell voltage of 1.58 V, along with a good recovery property. Additionally, the work demonstrates a new synthetic strategy to an efficient, noble metal-free-coordinated covalent organic framework (COF)-based, bifunctional electrocatalyst for water splitting.     

An airlight estimation method for image dehazing based on gray projection

Multimedia Tools and Applications - As the key parameter of dehazing algorithms, airlight value directly affect the calculation accuracy of sky region, and any deviation will lead to the chromatic...     

Simulation of humidity control and greenhouse temperature tracking in a growth chamber using a passive air conditioning unit

In this paper, we define a dynamic discrete model of a passive air conditioning unit, without the more typical compression or absorption-refrigeration cycle. The unit is composed of heat exchangers, a positioning system and humid corrugated pads. The aim of the study was to follow the temperature in a greenhouse and to replicate it with a desired and stable relative humidity in a ventilated growth chamber. A control law, based on a quadratic criterion and dynamic programming, taking output error and energy consumption minimisation into account, was used to control the behaviour of the unit in spite of air intake disturbances. The results of the simulation indicate that the air conditioning unit can produce a variable climate in the growth chamber, with a wide range of relative humidity setpoints.     

A study on flowshop scheduling problem combining Taguchi experimental design and genetic algorithm

As genetic algorithm parameters vary depending on different problem types when applying genetic algorithm to reach global optimum, appropriate design value selection has significant impact on the efficiency of genetic algorithm. However, most users adjust parameters manually based on the reference values of previous literature. Such trial-and-error method is time-consuming, ineffective, and often it could not locate the optimal combination. Therefore, in flowshop scheduling problems, this research anticipates to complete optimal parameter combination design in genetic algorithm using Taguchi experimental design. According to the research results, different ways of producing initial solution have significant influence on this research topic. Consequently, confirmation experiment is conducted using the optimal parameter combination obtained from the research results. It is found that the predicted value of signal-to-noise ratio (S/N ratio) and its actual value exists deviation of 0.238%, indicating repetitiveness and robustness of the obtained parameter combination. Hence, this research method can effectively reduce time spent on parameter design using genetic algorithm and increase efficiency of algorithm.     

Flame inertia into lean region in stratified hydrogen mixture

In hydrogen engines, the direct-injection stratified charge system has the ability to realize a more lean operation than homogeneous charge systems. Flame propagation into the lean region in the stratified hydrogen mixture was investigated in this study. Hydrogen was injected into a lean hydrogen–air premixed mixture charge of the equivalence ratio of 0.074–0.257. This stratified hydrogen mixture was ignited by an electric spark. The flame generated in the hydrogen jet propagated into the lean premixed mixture charge as if it had “inertia”, even though the stoichiometry of the premixed mixture charge was less than the lower flammability limit. The amount of burned hydrogen in the case of a stratified mixture was greater than that in the case of the homogeneous mixture. The flame seems to be supported from behind by the burned gas in the rich region until the decay of this support.     

Comparison of three internationally certified firefighter protective ensembles: Physiological responses,mobility, and comfort

BackgroundFire protective ensembles (FPEs) are essential to safely perform firefighting job tasks; however, they are often burdensome to the workers. The aim of this study was to compare three internationally certified fire protective ensembles from the European Union (EU), South Korea (SK), and United States (US) on physiological responses, mobility, and comfort.MethodsTen male professional firefighters performed a battery of exercises in the laboratory following the ASTM F3031-17 standard to evaluate mobility, occupation-specific performance, and physiological responses (body weight, heart rate (HR), core temperature (T_c), breathing rate (BR), and rating of perceived exertion (RPE)) to 20 min of treadmill walking (3.2 mph, 5% incline). All participants carried out the evaluation wearing each FPE in a random order. Mixed effects models examined time (pre-vs. post-) by ensemble (EU, SK, US) interactions for all physiological variables and compared comfort, performance, and subjective variables across ensembles.ResultsNo interaction effects were observed for body weight, HR, T_c, BR, or RPE (p = 0.890, p = 0.994, p = 0.897, p = 0.435, and p = 0.221; respectively). SK had greater trunk flexion than EU (78.4° vs. 74.6°, p = 0.026) and US had lower standing reach than EU (105.5 cm vs. 115.4 cm, p = 0.004). Agility circuit time was lower in US (9.3 s) compared to EU (9.8 s) or SK (9.9 s) (p = 0.051 and p = 0.019, respectively).ConclusionsThe findings suggest that physiological burden remained largely unchanged across the international FPEs. However, mobility, performance, and comfort may be significantly influenced across types. International stakeholders and end users should consider design implications when choosing fire protective ensembles.