21世纪住宅电气设计的构想

通过国内外室内电气设计标准的比较,提出了我国21世纪住宅配电设计的思路。     

提高供电质量减少高校供电能耗的措施

分析了高校现有供电网络存在的效率低、能耗大和供电质量不稳定的问题。提出了在增加投资不多的条件下，通过改变供电的运行方式既提高供电质量又减少能耗的一些方法。     

PWM整流器高功率因数的实现

论述了交流斩波电路中控制部分的工作原理，并对该电路中电抗器的取值进行了计算。采用16位80C196KC单片机能使控制电路非常简单，并容易实现高频开关器件整流器的高功率因数。     

Call Admission Policies Based on Calculated Power Control Setpoints in SIR-Based Power-Controlled DS-CDMA Cellular Networks

In this paper, we develop call admission control algorithms for SIR-based power-controlled DS-CDMA cellular networks. We consider networks that handle both voice and data services. When a new call (or a handoff call) arrives at a base station requesting for admission, our algorithms will calculate the desired power control setpoints for the new call and all existing calls. We will provide necessary and sufficient conditions under which the power control algorithm will have a feasible solution. These conditions are obtained through deriving the inverse of the matrix used in the calculation of power control setpoints. If there is no feasible solution to power control or if the desired power levels to be received at the base station for some calls are larger than the maximum allowable power limits, the admission request will be rejected. Otherwise, the admission request will be granted. When higher priority is desired for handoff calls, we will allow different thresholds (i.e., different maximum allowable power limits) for new calls and handoff calls. We will develop an adaptive algorithm that adjusts these thresholds in real-time as environment changes. The performance of our algorithms will be shown through computer simulation and compared with existing algorithms.     

Effect of Additives on Magnetic Properties of High Frequency MnZn Power Ferrite

In keeping with the advance of more compact and more power-saving electronic equipment, the demand is increasing for smaller and more efficient switching power supply. Therefore, it is necessary to provide the adequate magnetic power ferrite materials to satisfy the demand. Such ferrite materials have to meet the following main requirement: 1) high initial permeability (μ i ); 2) high saturation magnetic induction (Bs); 3) high Curie temperature (Tc); 4) high electrical resistivity (ρ ); 5)…     

Piston-driven laminar flow and heat transfer in a plane channel with a sudden expansion

 This paper presents a numerical study of piston-driven heat transfer and fluid flow in a plane channel containing a sudden expansion. The numerical method employed is based on a control-volume-based finite element method for incompressible flow with a staggered and moving grid and SIMPLER algorithm for pressure-velocity coupling. The numerical results show a good agreement with the experimental data reported in the literature. Results concerning time and space evolution of the thermal and flow fields are presented for different values of the expansion ratio, the initial clearance volume, and the piston velocity. Received: 20 April 2002 / Accepted: 23 January 2003     

输气管道投产置换过程气体混合规律研究

目前国内输气管道置换工艺主要依据人工经验进行，存在较大的盲目性，导致天然气管道投产成本较高，安全风险较大，有必要对输气管线安全投产工艺进行科学、系统的研究，实现输气管道的安全、高效、经济投产模式。文章讨论了现有置换工艺中不同的置换方式，认为不加隔离器的置换方法具有置换效率高、费用低以及安全可靠等优点，是一种有前途的新工艺、新方法。同时，为确保置换过程的安全性，针对置换过程中注氮量确定的盲目性问题，采用模拟试验方法，研究了天然气与氮气、氮气与空气混合段在不同流速和背压下长度的变化规律，从而为确定合理的用氮量提供了理论依据。     

Electrotunable Non‐reciprocal Laser Emission from a Liquid‐Crystal Photonic Device

A liquid crystal (LC) photonic device with an anisotropic optical heterojunction structure has been fabricated. The device has a phase‐retarding nematic LC (NLC) layer sandwiched between two polymer cholesteric LC films with right‐handed helices of different pitches. Electrotunable non‐reciprocal light transmittance and unidirectional circularly polarized (CP) lasing emission have been successfully demonstrated for this device structure. Two left CP (LCP) lasing emission peaks are observed at the edges of the overlapping region between the two photonic bands in the structure and are shifted upon the application of a voltage. In contrast, a non‐reciprocal right CP (RCP) lasing emission peak emerges at one of the band edges and diminishes upon the application of a voltage. These phenomena are interpreted based on the selective reflection of RCP light and the reorientation of the NLC molecules by the application of a voltage.     

电子电气设备的熔断器、断路器保护

熔断器、断路器是电子电气设备最常用的保护电器,熔断器可以实现过载、短路保护,断路器除具上述功能外,还能实行失压保护.根据线路特点和所保护的设备,采取相应的保护设施,确保用电安全.