A method to estimate entropies and heat capacities applied to alkali oxides

We present a method that is useful in the estimate and assessment of heat capacity data. The approach is based on an analysis of the logarithmic average of the phonon frequencies. In this quantity, that may be easily derived from experimental data on the vibrational entropy, the influence of atomic masses can be exactly accounted for even in polyatomic solids. Our method is applied to Li₂O, Na₂O, K₂O, Rb₂O, and Cs₂O. In particular, literature data for K₂O are critically examined.     

含氮化合物废气选择性催化氧化技术研究进展

通过对当前含氮化合物废气治理技术的对比分析,总结选择性催化氧化的相关技术优势。根据对含氮化合物的种类及来源分析,介绍氨气、腈类、胺类及其他含氮化合物的催化净化技术。重点总结催化剂的种类、研发进展和在实际使用中可能遇到的问题,同时展望含氮化合物废气选择性催化氧化技术的研发方向。     

Technique for Producing Mullite and Other Mixed-Oxide Systems

Mixed-oxide systems are of interest in a variety of technical ceramic applications. The key in many systems is to achieve a high degree of homogeneity, approaching the molecular level. A technique for producing mixed oxides via direct oxidation of mixtures of organometallic compounds is discussed as a potential route. Preliminary work performed on producing mullite is discussed.     

Microstructural Effects of Ion Implantation on Molybdenum

The effects of ion implantation and subsequent annealing on the microstructure of molybdenum have been investigated by transmission electron microscopy. The ions investigated were carbon, nitrogen, and tellurium. The ion-induced damage was found to give rise to grain boundary migration phenomena both during implantation and during subsequent annealing. Precipitation or ordering was found to occur for each ion on annealing.     

Gas-phase selective oxidation of toluene on TiO2–sepiolite supported vanadium oxides: Influence of vanadium loading on conversion and product selectivities

Gas-phase selective oxidation of toluene has been carried out on vanadium oxide systems (5–20 wt.% of V₂O₅, equivalent to 0.4–1.7 theoretical monolayers) supported on TiO₂–sepiolite (with titania loading around the theoretical monolayer, 12 wt.%) and on sepiolite. A study has been made on both the influence of vanadia loading and of the support on the catalytic behaviour of the supported vanadium systems. The reducibility by H₂ TPR was also studied as well as the acid and basic/redox sites from the results of conversion of the 2-propanol test reaction of the solids. Benzaldehyde, benzoic acid and several coupling products were the main ones detected, attaining over 50% selectivity towards the benzaldehyde and benzoic acid products at a total conversion around 10%. The activity and selectivity to the selective products exhibited by vanadium systems supported on mixed support were superior to those exhibited by the systems supported on sepiolite and increased notably in both series with the increase in vanadium loading. The best catalytic behaviour exhibited by the vanadium systems supported on mixed support, which also exhibited the highest density of sites capable of being reduced (as well as their reducibility) and of those responsible for propanone formation, could be attributed not only to the different balance of the vanadia species existing in the two supports (monomeric + oligomeric/polymeric), but also to such other factors as the nature of the support and, concretely, its chemical composition.     

Mn-containing catalytic materials for the total combustion of toluene: The role of Mn localisation in the structure of LDH precursor

Mg/Mn/Al mixed oxide systems of similar atomic ratios close to 2/0.5/1 were obtained by calcination of Mg,Al layered double hydroxide (LDH) type precursors containing Mn either in the cationic form within the brucite layer or as permanganate anions in the interlayer. The materials were characterised with PXRD, thermal analysis, XPS, ESR, TPR and BET. In mixed oxides derived from interlayer-doped precursor PXRD identified MgO–MnO solid solution and poorly crystalline Al-rich spinel phase, while those obtained from layer-doped LDH contained a better crystalline Mn-rich spinel. Surface of both materials was covered with poorly crystalline and/or amorphous Mn⁴⁺-containing phases. Higher reducibility of this surface coat in calcined layer-doped catalyst, as compared to interlayer-doped one, was attributed to the differences in the nature of underlying crystalline phases, and was considered the chief reason for the higher catalytic activity of this catalyst in the total oxidation of toluene.     

深层裂缝性碳酸盐岩储层混氮酸压技术

塔河油田奥陶系碳酸盐油藏 ,埋藏深、温度高 ,酸液滤失大 ,酸岩反应缓速困难。通过对混气酸压降滤、缓速、助排、造缝作用机理的研究 ,总结出该技术的工艺特点、控制要点、混注程序及注气量。在塔河油田现场应用 ,能提高残酸的返排能力 ,降低酸液的滤失系数     

栅氧化层TDDB可靠性评价试验及模型参数提取

采用恒定电压和恒定电流试验方法对20nm栅氧化层进行了TDDB可靠性评价试验，并完成了1／E模型参数提取，给出了恒定电流应力下描述氧化层TDDB退化的统计模型，较好地解释了试验结果。     

测辐射热计的微桥研制和Vox膜成膜研究

介绍了测辐射热汁的工作原理、器件结构的几何形状和研制状况,叙述了测辐射热计材料的特性及制备技术.     

Chemical Interactions in Diboride-Reinforced Oxide-Matrix Composites

Thermochemical analyses of interfacial reactions in titanium, zirconium, and hafnium diboride reinforced oxidematrix composites have been carried out to evaluate the chemical compatibility. The chemical reactivity of these diborides with oxygen and the high volatility of B₂O₃( l ) at reduced oxygen pressures are concerns during processing and operating conditions. The thermochemical stability and the vaporization behavior of B₂O₃( l ) are discussed in terms of partial pressures of dominant gaseous species of the boron-oxygen system at 1700 and 2300 K. The TiB₂/ZrO₂ and TiB₂/HfO₂ systems are thermodynamically stable in a limited oxygen pressure range. The TiB₂/Al₂O₃ system is stable, but the reactions in this system may apparently be accompanied by formation of gaseous products (B₂O₃, AlO, Al₂O, and lower boron oxides) in the presence of elemental oxygen. These thermochemical considerations are very useful in evaluating the effectiveness of oxides as diffusion barrier coatings on diboride reinforcements.