功率管焊接质量射线检测

介绍采用射线方法检测功率管芯片与基座之间的焊接质量。试验证明，选用合适的透照参数可使X射线照相和X射线实时成像对焊接部位的检测均得到较高的对比灵敏度，但X射线照相法成本低廉，一次可透照多个工件，效率高，为该功率管焊接质量的理想检测方法。     

分流液压转向牵引计算的展开图及其应用

本文论及分流液压转向牵引计算的概念,方法及其展开图,并且提供了计算机绘制的展开图和应用实例。     

An analytical expression for the power coefficient of an ideal horizontal-axis wind turbine

The paper shows that an analytical evaluation of the power coefficient C_p for an ideal horizontal-axis wind turbine can be made via an expression giving the direct relationship of C_p and the axial induction factor a. The results obtained agree closely with those obtained numerically from the usual integral expression involving several variables.     

皂河抽水站变电所主变保护改造

简要介绍WKT型微机保护装置运行情况、存在的问题及改造方案。根据美国通用电气公司(GE)的SR745微机型变压器管理继电器在皂河抽水站变电所的应用，介绍该装置的主要特点、安装调试中遇到的主要问题及解决方法和运行情况等，并对变压器保护改造进行了有益的探索。     

A novel nickel-based mixed rare-earth oxide/activated carbon supercapacitor using room temperature ionic liquid electrolyte

Mesopore nickel-based mixed rare-earth oxide (NMRO) and activated carbon (AC) with rich oxygen-contained groups were prepared as electrode materials in a supercapacitor using room temperature ionic liquid (RTIL) electrolyte. These electrode materials were characterized by XPS, XRD, N₂ adsorption, SEM as well as various electrochemical techniques, and showed good properties and operated well with RTIL electrolyte. A 3 V asymmetrical supercapacitor was fabricated, which delivered a real power density of 458 W kg⁻¹ as well as a real energy density of 50 Wh kg⁻¹, and during a 500-cycle galvanostatic charge/discharge measurement, no capacity decay was visible. Such promising energy-storage performance was to a large extent ascribed to nonvolatile RTIL electrolyte with wide electrochemical windows and high stable abilities worked with both electrode materials.     

集成电路芯片级的热分析方法

文章在研究分析了集成电路中功耗的主要来源以及温度对集成电路性能的影响后，详细总结了近年来集成电路芯片级的几种热分析方法。并从实际应用角度对这几种方法进行了分析和比较，讨论了各个方法的优点及其适用范围。     

Lifetime control in silicon power P-i-N diode by ion irradiation: Suppression of undesired leakage

The irradiation with high-energy (7.35 MeV) protons through a set of energy degraders was used to suppress leakage of the silicon power diodes subjected to local lifetime control. The aim was to modify the profile of recombination centers and to reduce production of vacancy complexes. The high-energy proton irradiation was compared with standard local lifetime killing by high-energy alphas. Recombination centers arising from irradiation were characterized after irradiation and subsequent annealing at 220 and 350 °C by deep level transient spectroscopy and I-V profiling. Static and dynamic parameters of irradiated diodes were also measured and compared. Results show that the applied irradiation with protons provides 3-10 times lower leakage compared to standard alphas for equivalent reduction of the reverse recovery current maximum. On the other hand, the excessive formation of hydrogen donors at high proton fluences and their diffusion during annealing at 350° decreases diode blocking capability.     

A new voltage control equipment using fuzzy inference

Power system control equipment needs higher sensitivity and operational reliability. Advanced voltage control equipment is needed for reducing the frequency of tap changes and improving the characteristics (the relationship between the actual voltage and reference voltage) of the voltage to meet today's power system requirements. However, these objectives are in a trade-off relationship. Studies of voltage control derived from a knowledge base suitable for electric power systems can satisfy these objectives using fuzzy inference. Compared with corresponding conventional equipment, the new equipment improved the deviation of 30 min average voltage of 30 percent. This paper describes the design concept of new voltage control equipment using fuzzy inference. In addition, field test results are described along with rules of fuzzy inference, membership functions, and the deviation of 30 min average voltage through detailed simulation.     

Energy considerations for topology-unaware TDMA MAC protocols

Since the energy budget of mobile nodes is limited, the performance of a networking protocol for such users should be evaluated in terms of its energy efficiency, in addition to the more traditional metrics such as throughput. In this paper, two topology-unaware MAC protocols—in which the scheduling time slots are allocated irrespectively of the underline topology—are considered and their energy consumption is derived. It turns out that the per frame power consumption is lower for the less throughput-efficient protocol, suggesting that energy savings are achieved at the expense of throughput.A finer energy consumption study is carried out in the sequel, focusing on the amount of energy consumed to successfully transmit a certain number of packets, or equivalently, on the per successful transmission power consumption. It is shown that the more throughput-efficient protocol consumes less energy per successful transmission under certain conditions (which are derived), due to the lower number of transmission attempts before a data packet is successfully transmitted. The same energy-efficiency relation is observed under certain conditions (which are derived) when data packets are delay constrained and, thus, may become obsolete if not transmitted successfully within a specific time interval. The conditions under which the per successful transmission power consumption is minimized for delay-constrained packets, are also established in this work and it is observed that when the system throughput is maximized, the power consumed is close to the minimum. Simulation results support the claims and the expectations of the aforementioned analysis.