Characterization of New DNA Aptamers for Anti-HIV-1 Reverse Transcriptase

HIV-1 RT is a necessary enzyme for retroviral replication, which is the main target for antiviral therapy against AIDS. Effective anti-HIV-1 RT drugs are divided into two groups; nucleoside inhibitors (NRTI) and non-nucleoside inhibitors (NNRTI), which inhibit DNA polymerase. In this study, new DNA aptamers were isolated as anti-HIV-1 RT inhibitors. The selected DNA aptamer (WT62) presented with high affinity and inhibition against wild-type (WT) HIV-1 RT and gave a KD value of 75.10±0.29 nM and an IC₅₀ value of 84.81±8.54 nM. Moreover, WT62 decreased the DNA polymerase function of K103 N/Y181 C double mutant (KY) HIV-1 RT by around 80 %. Furthermore, the ITC results showed that this aptamer has small binding enthalpies with both WT and KY HIV-1 RTs through which the complex might form a hydrophobic interaction or noncovalent bonding. The NMR result also suggested that the WT62 aptamer could bind with both WT and KY mutant HIV-1 RTs at the connection domain.     

线激光--机器视觉测量系统中的多传感器融合技术研究

针对逆向工程中直接从线激光扫描的数据云图中提取物体边界不仅繁琐而且精度也不好保证，为此提出建立线激光—机器视觉测量系统，先利用三日视觉获得物体初始边界，然后利用曲线延拓的方法并考虑影响延拓误差的因素，从而在满足一定精度要求的前提下实现不同传感器信息的融合。     

反求工程的产品几何建模技术研究

分析了目前在反求工程产品几何建模中广泛应用的曲面模型的局限性，指出反求工程为实现创新功能必须采用产品特征模型，提出了基于实体造型的特征建模方法。这种方法可以避免曲面模型的缺陷，拓宽反求工程的应用范围，是实现三维重构的新方法。探讨了有关的理论和关键技术。     

半导体硫化银纳米管的制备与光学性能

在以Triton X-100为表面活性剂形成的反相胶束体系中,成功地制备了半导体硫化银纳米管,管径88 nm～120nm、长度大于2.6 μm.X射线衍射测定表明,产物为纯单斜结构.紫外-可见光谱在275 nm处发现新的吸收峰,最大发射波长与体相材料相比,蓝移了38 nm.     

逆向工程中的一种编号点及其识别方法

对机械逆向工程中运用到的一种点的编码方式进行了简单的阐述和特征化，并详细介绍了运用区域搜索进行目标分割以及运用查找特性表并结合矩不变量的一种识别的算法。     

反对称矩阵的外在美和内在美的教学呈示

关于对称矩阵的美韵,笔者已经撰文做过研究,而反对称矩阵的美韵并不亚于对称矩阵。本文对反对称矩阵之美亦从“内”与“外”进行分析和探索。     

低合金耐海水腐蚀钢在模拟腐蚀环境下的耐蚀性能研究

以普碳钢为对比样,采用模拟海水全浸和间浸、盐雾、湿热等加速腐蚀实验并结合电化学测试技术研究了Cu-Cr-Mo系低合金耐海水腐蚀钢Q345C-NHY3的耐蚀性能.结果表明：在各种模拟环境条件下与碳钢相比Q345C-NHY3钢都具有较好的耐蚀性能.     

Modelling of marine immersion corrosion for copper-bearing steels

The non-linear phenomenological model previously proposed for the ‘general’ corrosion loss of mild and low alloy steels under fully aerated ‘at-sea’ near-surface immersion conditions is applied to provide a new interpretation of literature data for copper-bearing steels. The data is examined to extract the parameters required for the model as a function of average seawater temperature. On the basis of the expectation of consistency, the data is then used to calibrate the parameters. All are generally consistent with the parameters derived earlier for mild and low alloy steels. The calibrated parameters are used to predict a consolidated plot of expected corrosion loss-time-temperature for copper-bearing steels. This compares favourably with a similar plot derived earlier from observed data alone.     

基于吸附-扩散模型和遗传算法的反渗透膜性能预测

基于反渗透膜的吸附-扩散模型，导出了多孔膜对溶质的浓缩比表达式和组件的溶质平均脱除率。采用遗传算法对膜的性能进行了数学模拟，计算出了氯化钠对ESPA2反渗透膜的膜相溶质分配系数、溶质的膜相扩散系数、溶剂(水)的膜相扩散系数、膜的孔隙率和膜分离层厚度，计算得到的膜分离层厚度和膜相中水扩散系数等参数与芳香聚酰胺复合膜的测定值相吻合,其中，氯化钠透过率的均方差在10-7～10-6之间。     

从制药废水中回收金霉素的研究

本文介绍用微孔管表面预涂助滤剂、反渗透浓缩技术从抗生素厂废水中回收金霉素的研究，取得了较好的效果。从而为抗生素厂金霉素废水提供一种新的治理途径。