钢铁企业常见变频器维修

钢铁厂采用的变频器有很多种,现针对常用的丹佛斯、两门子、ABB变频器出现的故障,总结概括维修经验,对部分故障进行分析,供有关技术人员在维修变频器时借鉴.     

移动终端在智慧旅游发展中的应用刍议

智慧旅游未来发展前景广阔,移动终端在智慧旅游发展过程中的重要性日益凸显.文章阐述了移动终端在智慧旅游发展中的重点应用途径,并提出未来移动终端的使用会更加趋向于安全、便捷、高效、易用的趋势与特征.     

塑料的生命周期评价（LCA）

塑料的回收利用是近些年来再生资源研究的一个非常重要的方向。废旧塑料,尤其是消费后的废旧塑料是回收利用的重点。本文从回收方法和途径阐述了有关废旧塑料各类最新的塑料循环周期模型,进而说明积极的研究废旧塑料循环利用的新方法、新工艺具有十分重要的意义。     

2004年玻璃纤维质量分析和标准化工作进展

本文简述了我国玻璃纤维工业发展概况,分析了玻璃纤维产品的质量状况,介绍了玻璃纤维标准化工作的进展.     

一步法多单体反应挤出PP/PA6增容体系研究

采用一步法将接枝单体马来酸酐(MAH)和苯乙烯(St)、引发剂过氧化二异丙苯(DCP)与聚丙烯(PP)、尼龙6(PA6)、乙烯辛烯共聚物(POE)等混匀后在双螺杆挤出机中就地反应增容，详细地讨论了MAH／St／DCP用量和PA6含量对共混体系拉伸性能和冲击性能的影响；通过扫描电镜(SEM)分析了MAH／St／DCP用量及PA6含量对共混物的亚微形态、相界面的影响；通过红外光谱(FTIR)的结果分析对PP／PA6共混物增容反应机理进行了初步探讨。结果表明：一步法添加MAH／St／DCP引起PP／PA6共混体系发生了酰亚胺化反应，生成了Pp—(St—MAH)—PA6接枝共聚物有很好的增容作用；PA6与基体PP的界面非常模糊，分散相的颗粒也变得均匀细小，约0．5μm，大大改善了两相之间的粘结；从而使得PP／PA6共混体系的力学性能有了较大的提高，PA6质量分数在20％，MAH／St／DCP添加1～4份时效果最佳，缺口冲击强度提高2倍左右，拉伸强度、断裂伸长率、无缺口冲击强度也有明显改善。     

Carbon nanotubes and onions from carbon monoxide using Ni(acac)2 and Cu(acac)2 as catalyst precursors

New catalyst precursors (copper and nickel acetylacetonates) have been used successfully for the synthesis of carbon nanotubes and onion particles from carbon monoxide. Catalyst nanoparticles and carbon products were produced by metal-organic precursor vapour decomposition and catalytic disproportionation of carbon monoxide in a laminar flow reactor at temperatures between 705 and 1216 °C. Carbon nanotubes (CNTs) were formed in the presence of nickel particles at 923-1216 °C. The CNTs were single-walled, 1-3 nm in diameter and up to 90 nm long. Hollow carbon onion particles (COPs) were produced in the presence of copper particles at 1216 °C. The COPs were from 5 to 30 nm in diameter and consisted of several concentric carbon layers surrounding a hollow core. The results of computational fluid dynamics calculations to determine the temperature and velocity profiles and mixing conditions of the species in the reactor are presented. The mechanisms for the formation of both CNTs and COPs are discussed on the basis of the experimental and computational results.     

一种新的BOC(n,n)型信号的精确捕获算法

针对BOC(n,n)型信号自相关函数存在三个峰值导致伪码捕获模糊性的问题,提出了一种新的基于相关函数的精确无模糊的捕获算法。该算法将信号进行频域的多普勒补偿,通过本地增设QBOC(n,n)支路,利用BOC(n,n)信号自相关以及BOC(n,n)和QBOC(n,n)互相关,经移位±TC/4、取模、求和、平方运算而实现。理论与仿真分析表明,该算法在不改变自相关主峰宽度的情况下完全消除相关副峰的同时,显著提高了主峰峰值;比传统捕获算法的性能好4.5 dB左右,并且捕获精度良好、易于实现。     

Evolution of chemistry and morphology during the carbonization and combustion of rice husk

Both fine carbon/silica and pure silica powders can be obtained by carbonization and combustion of rice husk under non-isothermal conditions, and the products can be used for preparation of high-quality ceramic materials. Studies on the morphology, chemical and physical characteristics of products were carried out by N₂-adsorptionmeter, SEM, XRD, FTIR, ICP-MS and EA. Results indicate that decreasing the heating rate increased the specific surface area, pore volume and pore diameter. At a heating rate of 5 °C/min, the specific surface areas of both the carbon/silica and pure silica powders were 261 and 235 m²/g, and the average pore diameters were 2.2 and 5.4 nm, respectively. The products obtained from various heating rates were all amorphous. Thermogravimetric analysis was employed to study the reaction characteristics during carbonization or combustion, indicating that decomposition process of rice husk could be divided into three temperature zones. This results of the study can also provide the important information on the recovery of biomass material from rice husk.     

氨基丙烯酸卷铝涂料的研制

通过改性单体与（甲基）丙烯酸酯合成热固性丙烯酸树脂，与氨基树脂、颜料和助剂配制一种用于薄铝箔上的氨基丙烯酸卷铝涂料，该涂料具有较好的柔韧性、附着力和耐溶剂擦拭等性能。     

常减压蒸馏装置中和缓蚀剂的研制

针对炼油厂常减压塔塔顶冷凝系统现存的腐蚀问题,研制出以有机胺、咪唑啉衍生物为主要组分复配而成的新型中和缓蚀剂。通过模拟蒸馏实验表明:液相部位的缓蚀率达到99%以上,在初馏区露点部位的缓蚀率达到98%以上该中和缓蚀剂性能优良。