离心泵性能参数的自动测定和自动控制

通过将计算机技术应用于离心泵性能参数的研究，实现了离心泵性能参数的自动测定和自动控制。     

胶带机拉紧装置的计算分析

从胶带机三种基本拉紧装置的特点出发，考虑可能出现的工况，编制计算机程序，全面地分析了三种拉紧装置对选用胶带的影响，同时对拉紧行程的范围也加以讨论。     

基于Matlab和电容感应的室内定位系统

提出了一种基于Matlab和电容感应的室内三维定位系统的设计方法。该系统主要由三维电容极板、电容采集模块、信号频率采集模块、实时串口通信模块、Matlab显示模块等组成。系统依据电容感应原理,通过测量监测区域三维电容基板之间电容值的变化量,换算出被测物体相对极板的距离,并通过Matlab图像显示窗口显示被测物体对应的三维位置。该室内定位系统特别适用于对进入监测区域的活动物体进行实时定位监测。     

煤的荧光特性与其工艺性能的关系研究

简述了煤中镜质组荧光产生的机理及荧光参数的测量方法,通过测定一系列煤的粘结性和10kg小焦炉结焦性试验,探讨了煤的荧光特性与其工艺性能的关系。煤的荧光参数与其反射率呈正的线性相关关系,与其挥发分含量呈负的线性相关关系;煤的粘结性、结焦性均与其荧光参数有关;当煤化程度相同、煤岩组成基本相同时,煤的荧光强度愈强,其结焦性能愈好。     

Stability analysis and controller synthesis for discrete uncertain singular fuzzy systems with distinct difference matrices in the rules

This paper mainly studies an extended discrete singular fuzzy model incorporating the multiple difference matrices in the rules and discusses its stability and design issues. By embracing additional algebraic constraint, traditional discrete Takagi-Sugeno (T-S) fuzzy model can be extended to a generalised discrete singular Takagi-Sugeno (GDST-S) model with individual difference matrices E_i in the locally singular models, where it can describe a larger class of physical or non-linear systems. Based on the linear matrix inequality (LMI) approach, we focus on deriving some explicit stability and design criteria expressed by the LMIs for the regarded system. Thus, the stability verification and controller synthesis can be performed by the current LMI tools. Finally, some illustrative examples are given to illustrate the effectiveness and validity of the proposed approach.     

An analysis,design and tuning of Cascade Control Systems in the presence of constraints in actuator and process outputs

In the presence of rate constraints in actuator, design of cascade controller based on the primary controller conditional integration can result into closed-loop system oscillations. Stability analysis, performed by the describing function technique and confirmed by simulation, demonstrates that the solution based on the Anti-Reset Windup Cascade Control System (ARW CCS) structure is successful. Design and tuning of the ARW CCS secondary controller is a standard ARW single-input single-output problem. In the present paper tuning is proposed for the ARW CCS primary controller. For the serial process modeling simple rules are derived and confirmed by experimental results, obtained on a drum type boiler of a 210 MWe lignite coal fired unit. General design of the ARW CCS is based on the parallel process modeling and optimization of the primary controller. Optimization is performed in the frequency domain, under constraints on the maximum sensitivity, multiplicative uncertainty bound and sensitivity to measurement noise. Simulation and experimental results on a laboratory thermal plant demonstrate effectiveness of the proposed optimization.     

大型常压锥顶贮罐的设计

以工程实例为依据，论述国内以往较少采用的大型梁柱式支承锥顶贮罐的结构，介绍了国内外相关设计标准，给出了贮罐的典型结构－斜椽，横梁和立柱的计算公式，并用Excel电子表格编制了计算书。     

软质电容式车辆动态称重系统

介绍了一种软质电容式车辆动态称重系统.对该传感器静态特性进行了研究,分析了受力面积和时间的影响,针对橡胶材料粘弹性特性,提出了利用四元件模型对其建模.同时进行了动态实验,车辆总重量的测量误差在10%以内,其精度优于ASTME1318-02给出的Ⅰ类WIM系统精度(置信95%时总重误差±10%).实验结果表明:利用文中提出的车辆动态称重系统进行测量是可行的,它有助于随时测量,便于交通稽查.     

城市污水的层流换热特性理论

为有效利用城市污水热能,以污水源热泵系统中的流动工质——城市污水为研究对象,通过理论分析的方法,对其层流状态下的换热特性进行理论推导和实验验证.结果表明:污水作为热泵的冷热源,有良好的换热特性,推导得出的换热准则关联式h=4.53λ/D,为污水源热泵系统设计提供依据,同时为应用污水余热技术提供理论基础.     

基于红外原理的微型多气体检测系统的设计

为了解决目前煤矿瓦斯事故以及大量使用天然气的家庭安全、环境污染等问题,设计并开发了一种具有集成化、微型化的红外多气体检测系统,通过实验数据的测试对比和数据分析,这种系统达到了微功耗、微体积、宽量程、高分辨率等技术要求,且能集成多气体检测的微型检测系统.重点介绍了红外检测的光学原理,以及从单气体检测引入到集成多气体检测的设计思想和方法,并介绍了有关CAN总线的数据传输方式和无线数据通信方式在系统中的应用.