Experimental study on the effect of lateral concentrated smoke extraction on smoke stratification in the longitudinal ventilated tunnel

Smoke is the main cause of death in tunnel fires. It is one of the important measures to maintain smoke stratification in the early stage of tunnel fire. This article focused on experimentally studying the combined effect of lateral concentrated smoke extraction and longitudinal ventilation on the smoke stratification, which never be revealed before. The velocity of the smoke layer and air layer, vertical temperature distribution, and the flow patterns of the smoke were measured. It was found that the longitudinal ventilation and lateral concentrated smoke extraction would affect the flow of the smoke and change the shear velocity between the smoke layer and air layer, then, the patterns of the smoke layer will be affected. And the flow patterns with Froude (Fr) number can be classified into three categories: (a)Fr < 0.6 , with stable smoke stratification; (b) 0.6 < Fr < 0.85 , with a stable smoke stratification but the blurring interface; and (c) Fr > 0.85 , the smoke layer is completely unstable. The result can provide a reference for ventilation design of immersed tube tunnels.     

A Flux‐Modulating Synchronous Machine with Permanent Magnet Excitation

This paper presents a novel type of flux‐modulating synchronous machine (FMSM) in which permanent magnets (PMs) are embedded in the stator back‐iron. The rotor has neither windings nor PMs. A prototype machine with an outer‐rotor configuration was designed and manufactured to validate the operating principle of the FMSM. The characteristics in the motor mode of the prototype machine were also investigated with a vector control system. The results of the investigations show that, as in surface‐mounted PM motors, the torque of the FMSM is predominantly generated by the PM flux and can be controlled using the armature current.     

Short communication: Effect of pomegranate-residue supplement on Cryptosporidium parvum oocyst shedding in neonatal calves

Cryptosporidium parvum is considered one of the most common enteropathogens, responsible for the high incidence of diarrhea and deleterious implications on immunity and health in neonatal calves. The pomegranate is well known for its health-promoting properties. Two experiments were designed to test the antiparasitical and antidiarrheal effects of concentrated pomegranate extract (CPE) supplement in milk in neonatal Holstein calves. Forty-one calves were randomly divided into control (n = 20) and treatment (n = 21) groups. For the first experiment, the treatment group was supplemented with 3.75% CPE in the daily milk ration, between 3 and 14 d of age, whereas the control group received only milk. Fecal samples were collected between d 5 and 13 to quantify Cryptosporidium oocysts, and the duration and intensity of diarrhea were evaluated. Reduced fecal oocyst count and diarrhea intensity and duration were revealed in the 3.75% CPE calves. No difference was noted in average daily gain between groups. In a second experiment, which was designed to test the effect of a lower CPE concentration (0.6% of daily milk allocation), no effects on fecal oocyst count and average daily gain were observed. However, compared with control, the lower CPE group was characterized by a shorter duration of diarrhea and higher weight gain among males at 14 d of age. These results suggest that the CPE supplement-to-calf milk ratio may potentially alleviate intestinal morbidity caused by Cryptosporidium.     

浅谈硝酸镁法浓硝酸生产中稀硝酸镁含硝量的优化

分析了硝酸镁法生产浓硝酸过程中稀硝酸镁含硝量高的危害性。通过采取加强对加热器的维护、优化硝酸镁沉降方法和改变硝酸镁投料方式等一系列优化改进措施,提升了浓硝酸装置连续运行能力,降低了装置综合能耗。     

优化工艺 提高直硝高压釜使用寿命

从工艺上分析了影响直硝高压釜反应效率及使用寿命的因素，并提出了具体的工艺优化措施。     

MgCl2-NaCl-KCl熔盐体系中金属Mg对316H不锈钢的缓蚀性能研究

通过电化学方法结合浸泡腐蚀测试考察了金属Mg对MgCl₂-NaCl-KCl(MNKC)熔盐的净化和腐蚀抑制作用。结果表明,金属Mg的加入量在500μg·g^-1以上时,316H不锈钢在600℃MNKC熔盐中的腐蚀电位Ecorr<-0.80 V vs NiCl₂/Ni,腐蚀电流密度Icorr<25μA/cm²,线性极化电阻Rp>800Ω·cm²,熔盐对316H不锈钢的腐蚀得到显著抑制。并对金属Mg对MNKC熔盐的净化和腐蚀抑制机理进行了探讨。     

高温超导变压器关键技术

由于超导材料的无阻载流特性,其在超导电缆、超导限流器、超导变压器、超导储能、超导电机等超导电力装置中的应用引起人们极大兴趣。其中超导变压器具有体积小、重量轻、损耗低、无火灾隐患、无环境污染和低漏抗等特点。简要介绍了高温超导变压器基本结构,重点介绍了变压器研发过程中的关键技术问题,包括液氮和气氮低温绝缘特性、超导绕组损耗分析、电流引线设计、非金属低温容器设计等,为高温超导变压器的研发提供有用的参考。     

Zero-current Switching Series Resonant High-voltage DC-DC Converter with Series-connected Primary Windings of Center-tapped Transformer

Abstract—This article proposes a novel zero-current switching series resonant inverter-fed voltage multiplier based high-voltage DC-DC converter. The series resonant inverter in the proposed topology has two power switches (insulated-gate bipolar transistors), two resonant capacitors, and only one high-voltage transformer with center-tapped primary windings. The power switches are connected in the form of a half-bridge network. The leakage inductances of the transformer's primary windings together with resonant capacitors form two series resonant circuits. The series resonant circuits are fed alternately by operating power switches with an interleaved half-switching cycle. The secondary winding of the high-voltage transformer is connected to a voltage multiplier circuit to rectify and boost the voltage. The converter operates in discontinuous conduction mode, and its output voltage is regulated by pulse-frequency modulation. Therefore, all the power switches turn ON and OFF at the zero-current switching condition. The main features of the proposed converter are lower power loss, less cost, and smaller size compared to previously proposed series resonant high-voltage DC-DC converters. The experimental results of a 130-W prototype of the proposed converter are presented both for dynamic and steady-state operation. The results confirm the excellent operation and performance of the converter.     

基于探测线圈法的双馈式发电机转子匝间短路槽的定位研究

双馈式感应发电机广泛应用于风力发电领域,发电机转子绕组匝间短路是目前国内外研究的热点之一。由于双馈风力发电机的特殊结构和工作特性,准确定位发生匝间短路故障的槽号存在一定难度。本文从有限元理论出发,利用Ansoft仿真分析正常和转子绕组匝间短路故障后的气隙磁密的变化特性。从磁特性角度出发,分析了故障槽定位的可行性;通过探测线圈和光电装置的结合,对比分析正常与故障下采集信号的差值,即可确定故障槽的位置。