化学结构式的拓扑描述

化学结构式的拓扑描述,是化学信息计算机化的手段之一。这里系统地建立了一整套的连接表(三类:紧缩连接表、冗余连接表、和连接方阵),用来进行结构式中原子之间连接关系的拓扑描述,对分子结构进行数值化。同时,阐述了连接表唯一化的方法,并介绍了不同类型连接表之间的转换关系和还原为平面结构式图形的绘图程序。     

汽油辛烷值智能调合系统

采取一种能够在线学习、不断提高、建立一系列模型的策略，提出了一种具有学习功能的汽油辛烷值智能调合系统。该系统可以根据成品汽油辛烷值指标、生产成本和市场价格等因素提供一个较好的油品调合调度方案。实际应用结果表明，利用参数学习的方法计算调合汽油辛烷值是可行的。     

XC型车号自动识别系统在轨道衡的应用

介绍了XC型车号自动识别系统的工作原理及在轨道衡的应用,解决了长期以来轨道衡路用车车号和自重依靠人工抄录易出错及劳动强度大的问题。     

分析离心油泵性能的新方法

提出一种利用已知泵性能曲线深入分析离心油泵性能的新方法。首先列出离心泵内部流动能量平衡关系式和离心泵基本方程并分别对其求导 ，根据实验数据，联立求解方程计算出滑移系数、水力损失系数、容积效率、水力效率和机 械效率等参数随叶片数的变化关系，深入研究了叶片数对性能的影响。结果表明，滑移系数随叶片数增加而增大；叶片数通过改变叶轮滑移系数和水力效率来影响泵的水力性能；降低叶轮圆盘摩擦损失是提高离心油泵性能的关键。     

An IR study on ion-specific and solvent-specific swelling of poly(N-vinyl-2-pyrrolidone) gel

Swelling degrees of poly(N-vinyl-2-pyrrolidone) (PVP) gel were measured in aqueous salt solutions and in water/organic solvent mixtures to find marked ion- and solvent-specificities. In order to investigate any correlation of those specificities with hydration or solvation of PVP, IR spectra band of the CO group was monitored by means of ATR method both for PVP gel and the relevant solution systems. Dependence of the peak frequency on the swelling ratio suggested that hydration of PVP carbonyl group in deswollen gel systems is different from that in the corresponding solution systems. In the solution systems, PVP carbonyl band showed a high-wavenumber shift for deswollen systems, which can be well correlated with changes in water proton charge through ionic hydration and with Gutmann's acceptor number of organic solvents. In the deswollen gel systems, the CO band showed a low-wavenumber shift, suggesting a strong hydration or doubly hydrated state. This unexpected behavior was interpreted by assuming an intermolecular hydrogen bond of two carbonyl groups intermediated by water molecules.     

车号定位识别与可信度估计

以车号的定位与识别为例，应用行投影法对车号图片进行倾斜行定位，证明了模拟与场景的二维互相关系数近拟等于一维投影互相关系数，在此基础上提列投影法快速行扫描识别算法及相应的可信度估计方法，这种方法对于室外拍摄的有复杂背景，光照变化，字体微倾，字符排列疏密不均及噪声干扰的车牌图像具有很好的识别效果。     

烷基化原料预加氢工艺应用分析

由于来自催化裂化装置的烷基化原料中所含有的丁二烯在烷基化反应中可生成重质油,使产品干点上升,辛烷值下降,并使酸耗增加.针对这种状况,齐鲁石化公司研究院和胜利炼油厂联合开发了QSH-01烷基化原料预加氢催化剂及其相应的工艺技术,来脱除原料中丁二烯.笔者对该工艺技术及其应用作了阐述,并对该技术的应用前景作出分析.     

太钢电弧炉上应用四星接法MOA的必要性

分析了太钢电弧炉变压器高压侧相间过电压的产生原因，比较了用于限制过电压的避雷器的两种接法．结论是用四垦接法ＭＯＡ限制过电压的效果较显著．     

YAG：Ce Phosphors for WLED via Nano-Pesudoboehmite Sol-Gel Route

The sub-micron sized YAG ： Ce phosphors were synthesized via a modified sol-gel method by peptizing nano-pesudoboehmite particulate. It is found that YAG phase from the dried gel powders appears at 1000 ℃ then the pure YAG phase exists at a relatively lower sintering temperature of 1400 ℃. The smaller sizes of phosphors in the ranges of 1 - 3 μm are obtained due to the contribution of seeding effects of nano-sized alumina particles to strengthen each step of the processes. Both the excitation and emission spectra of photoluminescence of the phosphor obtained at 1400 ℃ meet well with the spectroscopic requirements of the WLED phosphors.     

Z900MCM综述

介绍了Z900 MCM设计和布局,可控塌陷芯片连接(C4)工艺在Z900 MCM组装中的应用。从设计上通过加入垂直电感器及去耦电容器减小其噪声。通过基板测试和功能测试,剔除有缺陷的基板和芯片。Z900 MCM采用先进的MCM—D技术和MCM返工及冷却技术。Z900 MCM平均无故障时间高达40年。