小型压裂技术的应用

在加砂压裂施工前进行小规模压裂，能使加砂压裂更加有效。通过对近两年来胜利油田应用小型压裂指导压裂设计的4口井实例的总结，说明了为确保加砂压裂施工的成功，尤其对端部脱砂压裂设计，小型压裂必不可少。同时介绍了Nolte方法和步骤，及小型压裂为加砂压裂设计提供的必要参数，讨论了参数解释的影响因素。为配合小型压裂工作，全面提高压裂技术水平，应选部分井进行岩石力学参数解释工作、适当延长压降测量时间，并测出瞬时停泵压力等。     

造林整地排水产生水土流失及其防止措施

造林整地排水产生水土流失及其防止措施［英］Ｐ．Ａ．ＣａｒｔｉｎｇＭ．Ｓ．ＧｌａｉｓｔｅｒＴ．Ｐ．Ｆｌｉｎｔｈｅｍ１引言英国高地造林整地的常规方法是采用顺坡和横坡开沟相结合的办法进行翻耕排水。现已制订有森林排水网路的设计准则及河道管理准则，遵循这些准则...     

隧洞开挖网络进度的优化研究

本文以单项工程为研究对象,以隧洞工程为例,研究了单项工程施工所需用的时间。文中以施工单位所具有的资源,结合施工工作环境、作业空间为约束条件,以费用最小为目标函数,建立了优化模型。由资源的工作性能指标,利用模糊数学原理,对资源间的匹配程度作了定量分析,并进一步推出了不同匹配程度的资源对作业时间的影响的计算式。并从影响各工序完工时间的因素的随机性出发,利用数理统计理论,由各工序的细分活动的规律推出了各工序的完工需用时间的概率表达式,解决了工期与置信度间的关系。最后结合工程实例,求出了一定置信度下,不同资源供应时的最优工期。     

Scattering of waves by flaws in anisotropic laminated plates

The strip element method (SEM) is used to investigate wave scattering by rectangular flaws in anisotropic laminated plates. The plates containing flaws are divided by junctions into domains in which the SEM is applied. For each domain, SEM equations are obtained which give a relationship between the traction and displacement vector on the vertical boundaries. A set of equations which gives a relationship between the traction and displacement vector on the junctions is then obtained by assembling the SEM equations for all the domains. This set of equations is solved by using the conditions on the junctions. Scattered wave fields in the frequency domain for isotropic and composite plates with rectangular flaws are computed and discussed in comparison with results for corresponding plates without flaws. A technique for determining the length of a rectangular flaw in a plate is also presented. The results presented in this paper are of importance and could be used in the characterization of flaws in anisotropic laminated plates.     

Effect of plasticity on the residual stress measurement using the groove method

The mechanical methods based on milling rectilinear or annular grooves on a component's surface and measurement of relaxed strains are some of the most used semi-destructive methods for the determination of residual stresses. These are evaluated from the relaxed strains by means of equations based upon the linear elastic theory. In this paper the errors due to yielding localised at the bottom of the groove have been investigated. The analyses were carried out by means of the finite element technique varying the most important parameters involved. The experimental results show a good agreement with the numerical ones.     

A prediction method for thermal conductivity of alternative refrigerants in the liquid phase

A prediction method for the thermal conductivity of halocarbon refrigerants in the saturated liquid state in the reduced temperature range 0.3 to well above 0.9 is presented in this paper. The aim of the method is to present a very simple calculation of the transport property useful for engineering purposes. The method determines thermal conductivity as a sole function of the reduced temperature and requires the knowledge of a parameter dependent upon easily available physical constants characteristic of each compound. The method is validated against experimental data available in the literature, giving average absolute deviations which are usually less than 5%, with maximum absolute deviations generally less than 10%. An extension of the method to estimate thermal conductivity of binary mixtures is also presented, along with a comparison with the few experimental data available in the literature.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

间断Galerkin方法的最优误差限

本文考虑了数性双曲方程的离散Ｇａｌｅｒｋｉｎ方法。如果精确到光滑的并且同是几乎均匀的，证明了对于分层常数元的最优的和超收敛的误差限。     

Intelligent Control of Consolidation and Solidification Processes

Intelligent processing of materials (IPM) deals with the integration of process models and in situ sensors into an intelligent process controller to achieve desired material properties. IPM-based control systems recently have been developed for both consolidation and solidification processes. This article explores the application of models based on the finite- element method (FEM) to develop process actuation systems, to design process schedules and component shape, and to develop a control model with which to control the process. The results in this article were presented at the AeroMat ’93 Advanced Aerospace Materials/Processes Conference and Exposition, Anaheim, CA, 7–10 June 1993     

天然调味料──酵母抽提物的研究进展

着重论述了酵母抽提物的特性、在食品中的应用前景、制造方法、工业化生产中存在的问题及其解决方法，并对酵母抽提物的发展方向作一展望。     

紧凑式换热面瞬态实验中的全程直接配比法

在紧凑式换热面的瞬态实验中，为获得准确的实验结果，不仅要建立符合试验工况的理 论解，而且还要选择合适的配比方法，以便尽可能减小测量误差对配比结果的影响．本文就瞬态实 验的配比，提出了一种新的基于计算机的全程直接配比法，由于它采用了所有可用测试点进行配 比并且其理论解与实测值的配比误差是通过最小搜索步长来控制的，因此，实验结果的准确性和 可靠性优于通常应用的间接配比法和选点配比法．