提高定制产品物料需求预测的准确性

提高定制产品物料需求预测准确性是提高企业竞争能力的必由之路。通过某公司提高定制产品物料需求预测准确性的具体项目实践，介绍了关于提高物料需求预测准确性的具体措施。通过建立一种能为各部门所共同接受的产品语言来加强各部门的信息交流，并减少从客户的实际需求到物料预测之间的中间环节来提高整个物料预测的准确性，并以实例验证其有效性。     

套管钻井用套管外表面磨损后剩余强度分析

在分析讨论套管钻井管柱磨损形态的基础上,结合API5C5实物试验尺寸要求,通过有限元计算分析方法,对钻井套管完钻后含有外表面磨损缺陷的套管柱的极限剩余抗挤强度和极限剩余抗拉强度进行了研究,分别获得了均匀磨损和偏磨条件下,套管钻井套管柱外表面磨损缺陷的临界长度尺寸数值,以及不同破坏失效准则条件下的剩余抗挤强度和剩余抗拉强度的计算方程,为套管钻井中套管柱的设计、计算奠定了理论基础。     

不同形状垃圾焚烧过程中挥发份的释放仿真研究

假设垃圾加热到核心温度为760℃时认为其挥发份全部析出，把固体垃圾看成平板、球形、柱形三种基本形状。建立三种形状垃圾的非稳态导热计算的数学模型和仿真模型，并在模型上进行仿真实验。通过研究垃圾焚烧过程中挥发份生成和燃烧的基本规律，得到垃圾尺寸和烟气流速对挥发份析出的影响．提出改善垃圾焚烧的措施。     

A Profile of Psychologists' Views of Critical Risk Factors for Completed Suicide in Older Adults.

The ability to accurately and reliably predict whether an older adult will commit suicide has eluded clinicians and researchers. A random national sample of psychologists who work with older adults was surveyed regarding their perception of 36 risk factors for completed suicide and indirect self-destructive behavior in older adults. This study produced a profile of psychologists' assessment and treatment practices when working with suicidal older adults. Determining what psychologists consider to be the most salient risk factors for completed suicide is important in identifying a minimum standard that clinicians should follow when assessing older adults. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

梯恩梯-吉纳、地恩梯-太安装药体系自旋爆轰特性的研究

本文研究了梯恩梯-吉纳(TNT-DINA)和地恩梯-太安(DNT-PETN)体系的自旋爆轰现象,爆轰波是以低频脉冲方式传播.这些体系具有的爆速、爆热分别为DJ=7.3～7.4km/s和Qv=(5.40±0.01)MJ/kg.不同组成的爆速和爆压PJ通过SW程序计算.用扩散区的爆压P3和爆温T3来评估爆轰波的衰减和重新点火.敏化剂含量相同,梯恩梯-黑索金(TNT-RDX)体系的爆压PJ大于TNT-DINA的爆压,TNT-RDX体系的温度T3比TNT-DINA高60～100K.计算值与实验结果吻合较好.     

High-temperature,high-pressure thermophysical measurements on liquid zinc

Wire-shaped zinc samples were resistively volume heated as part of a fast-capacitor discharge circuit. Time-resolved measurements with submicrosecond resolution of the current through the specimen, the voltage drop across it, and the thermal expansion of the specimen as a function of time allow determination of the enthalpy, electrical resistivity, and density at different temperatures up to superheated liquid states of zinc far above the normal boiling point. High static pressures, up to 3800 bar of the ambient medium water, were used. An estimate of the critical pressure for zinc is given by investigations of the stability of the sample with a framing CCD camera, taking pictures of different samples varying the ambient static pressure. The critical volume and the critical temperature are obtained by means of an extrapolation of measured data at different pressures.Paper presented at the Fourth International Workshop on Subsecond Thermophysics, June 27–29, 1995, Köln, Germany.     

Effect of processing history on the properties of Ag-based tapes

The Bi-system tapes and coils were prepared by the powder-in-tube method. The effect of processing and heat treatment on the properties of the tapes and coils was studied. It is found that the shearing stress produced by the rolling process may destroy the 2223 phase, and the destroyed 2223 phase cannot be recovered by heat treatment, whereas the pressing stress produced by the uniaxial pressing process only makes the 2223 phase grains break, and the broken 2223 phase can be closed by the heat treatment. TheJ _c values of the rolling samples, pressing sample, and the coil with a diameter of 35 mm are over 1.3×10⁴, 2.5×10⁴, and 4×10³ A/cm² (77 K, 0 T), respectively.     

Measurements of the refractive index of alternative refrigerants

Measurements of coexistence curves of the refractive index of HCFC-22, HFC23, HFC-32, HFC-125, and HFC-152a have been carried out in the range from ambient to critical temperature. Near the critical temperature the refractive index has distribution in both the vapor and the liquid phases in the test cell. Thus the values at the boundary between vapor and liquid are selected at those of saturated vapor and liquid, respectively. The values of the critical temperature and critical refractive index for each substance are estimated. The refractive index is related to density by the Lorentz-Lorenz equation. In the case of HFC-32 the value of the LL function is assumed to be constant in the limited region near the critical point, and the values of density of saturated vapor and liquid are calculated and are compared with the experimental values of density obtained byPVT measurement.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

Transport properties of 1,1-difluoroethane (R152a)

Based on reliable. carefully selected data sets. equations for the thermal conductivity and the viscosity of the refrigerant R 112a are presented. They are valid at temperatures from 240 to 440 K, pressures up to 20 MPa. and densities up to 1050 kg · m^–3. including the critical region.     

High-field magnetic and transport critical current density of Sm-Ba-Cu-O: Agx superconductors at low temperature

Variation of magnetic critical current density (J _mc) and transport critical current density (J _tc) in high magnetic fields at liquid helium temperature were investigated on Sm-Ba-Cu-O: Ag _x (x=0.0, 0.2, 0.4, and 0.6) superconducting samples prepared by the coprecipitation technique.T _c and crystallographic parameters remain unaffected by Ag addition. However, bothJ _mc andJ _tc were found to increase on Ag addition. The volume pinning force (F _p) also increased with increase in Ag concentration, resulting in stronger flux line sheer. Microwave-induced d.c. voltage measurement shows a significant reduction of the total number of weak links between the superconducting grains with increasing concentration of Ag, which creates stronger pinning potentials between the boundary of the superconducting intergrains. Hence, the volume pinning force is greatly enhanced by Ag addition, leading to flux line lattice movement which is responsible for highJ _mc andJ _tc.