真空制盐蒸发结晶器的设计与实践

真空蒸发制盐外热式强制逆循环轴向出料蒸发结晶器，经多个厂家生产应用实践证明是成功的，具有生命力的。这种新型结构，作为一项新技术新设备应加强研究，总结提高，推广应用。不断完善。文章从流体力学、结晶机理角度要求，到具体工程设计参数和材质选用。论述了该罐的特点。     

浅议铵梯炸药质量检验中的三个问题

文章探讨了GB 12437-2000标准规定的产品检验项目中,中包浸水试验的科学性问题和对批产品进行抽样时的样本代表性问题以及使用多段爆速仪测试爆速时应注意的样本量问题.     

公路边坡培植柠条的探讨

介绍了河曲公路所处的自然环境 ,阐述了人工铲草的利与弊 ,进而提出了边坡培植柠条的效益分析 ,并对培植柠条的苗期管理及与养护生产的关系进行了介绍     

10kV配电室操作控制电源电压下降的解决措施

本提出了10kV配电室操作电压下降的现场解决方案。     

提高小样试织质量的措施

介绍了纺织品小样试织时，为了提高试织质量在经纬纱准备及织造工序时所采取的一些措施。     

再磨与擦洗对提高钼精矿质量影响试验研究

就再磨与擦洗对提高钼精矿质量的影响进行了试验研究。结果表明 ,增加Ⅲ段再磨、Ⅳ段擦洗作业可有效地提高钼精矿质量     

Experimental Investigation of FRP-Strengthened RC Beam-Column Joints

The results of a comprehensive experimental program, aimed at providing a fundamental understanding of the behavior of shear-critical exterior reinforced concrete (RC) joints strengthened with fiber reinforced polymers (FRP) under simulated seismic load, are presented in this study. The role of various parameters on the effectiveness of FRP is examined through 2/3-scale testing of 18 exterior RC joints. Conclusions are drawn on the basis of certain load versus imposed displacement response characteristics, comprising the strength (maximum lateral load), the stiffness, and the cumulative energy dissipation capacity. The results demonstrate the important role of mechanical anchorages in limiting premature debonding, and they provide important information on the role of various parameters, including: area fraction of FRP; distribution of FRP between the beam and the column; column axial load; internal joint (steel) reinforcement; initial damage; carbon versus glass fibers; sheets versus strips; and effect of transverse beams.     

SIMULATION STUDIES OF THE REMOVAL OF WATER FROM ETHANOL BY A CATALYTIC DISTILLATION PROCESS

A new approach based on catalytic distillation (CD) technology was proposed to remove water from ethanol. Isobutylene was introduced to react with water in the CD column. The commercial software simulation tool Aspen Plus was used to investigate the effects of key design factors such as operating pressure and temperature, reactant ratios, reflux and distillate to feed ratios, number of separation and reaction stages, and feed and reaction zone location. It was found that the CD technology offers potential advantages of reduced energy consumption and reduced capital cost over traditional approaches for the removal of water from ethanol.     

Visual evaluation at scale of threshold to suprathreshold color difference

Visual evaluation experiments of color discrimination threshold and suprathreshold color‐difference comparison were carried out using CRT colors based on the psychophysical methods of interleaved staircase and constant stimuli, respectively. A large set of experimental data was generated ranged from threshold to large suprathreshold color difference at the five CIE color centers. The visual data were analyzed in detail for every observer at each visual scale to show the effect of color‐difference magnitude on the observer precision. The chromaticity ellipses from this study were compared with four previous published data, of CRT colors by Cui and Luo, and of surface colors by RIT‐DuPont, Cheung and Rigg, and Guan and Luo, to report the reproducibility of this kind of experiment using CRT colors and the variations between CRT and surface data, respectively. The present threshold data were also compared against the different suprathreshold data to show the effect of color‐difference scales. The visual results were further used to test the three advance color‐difference formulae, CMC, CIE94, and CIEDE2000, together with the basic CIELAB equation. In their original forms or with optimized K_L values, the CIEDE2000 outperformed others, followed by CMC, and with the CIELAB and CIE94 the poorest for predicting the combined dataset of all color centers in the present study. © 2005 Wiley Periodicals, Inc. Col Res Appl, 30, 198–208, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20106     

关于混凝土四面体截流材料的探讨

通过对比混凝土四面体与特大块石这两种截流材料的抗冲稳定性和施工的方便性,分析了混凝土四面体截流材料在工程应用中存在的问题。指出:①混凝土四面体密度、综合稳定系数、化引球形粒径都偏小,在龙口的抗冲稳定性不如特大块石;②混凝土四面体制作麻烦,成本高,占地面积大,装运困难,抛投强度低,施工不如特大块石方便;③在截流施工中宜优先使用特大块石,慎用混凝土四面体。