纯镁对碳化硼颗粒的常压浸渗

本文研究了纯镁对不同致密度的碳化硼(B₄C)颗粒基片的常压浸渗性;讨论了镁液对B₄C颗粒聚集体常压浸渗的影响因素;提出了浸渗模型。研究表明,纯镁在氩气保护下,800～850℃温度范围保温30min即可浸渗B₄C颗粒聚集体。浸渗深度和宽度随加热温度升高和保温时间延长而增加;常压浸渗的B₄C_P/Mg复合材料具有很高的硬度,B₄C颗粒在基体中分布较均匀。     

彩色多频同步显示器行激励级电路的倒推设计法（1）

行激励级电路的设计是完全为行输出级服务的,它实质上是行输出级电路设计的一个重要而不可分割的组成部分。因此行激励级电路的设计,自然采用了从显象管偏转线圈和行输出管到激励变压器和行激励级的倒推设计法。     

Autolisp在开发V画面体视图自生成系统中的应用

介绍了近年来体视投影技术的应用及发展，并提出了用AutoCAD的内嵌开发工具Autolisp语言结合Visualisp中的对话框控制语言DCL来开发体视图自动生成系统的新思路．根据V画面体视投影原理，推导出了V画面体视变换矩阵．给出了该系统的程序流程框图及相应的功能模块．并将该系统的界面和基本功能进行了展示，从而为体视自生成技术的研究开辟了新的道路．     

SiC颗粒增强铝基复合材料切削表面分形维数及其与抗磨损性能的关系

做为一种耐磨性能很好的材料 ,SiC颗粒增强铝基复合材料切削加工表面具有分形特征。实际研究表明SiC颗粒增强铝基复合材料切削加工表面分形维数与抗磨损性能有密切关系 ,本文还分析了表面分形维数越大其抗磨损性能越强的机理。     

Equivalent Conditions for Convergence of Splittings of Non-Hermitian Indefinite Matrices

We present some sufficient and necessary conditions for convergent splitting of a non-Hermitian indefinite matrix. Some sufficient conditions to determinate a matrix with a (strongly) dominant symmetric part for a class of boundary value problem are also obtained. These results are applicable to identify the convergence of iterative methods for solving large sparse systems of linear equations.     

SiCp/2024复合材料的氢脆敏感性研究

在浸泡、阴极极化、阴极极化同时迭加拉伸变形、添加As₂O₃毒化剂等常见致氢条件下,通过慢应变速率拉伸试验研究了SiC_p/2024复合材料的力学性能,考察了断口形貌.测定了该材料在按几种常用充氢条件充氢后的氢含量.发现虽然强烈阴极极化使材料力学性能下降,但其原因在于阴极极化引起的碱性腐蚀,与氢脆无关.获得了不同于前人研究的新结论:在本文试验条件下SiC_p/2024材料不发生氢脆,也不发生不可逆氢损伤,其原因与该材料难以充入氢有关.     

In-situ monitoring and control for MOCVD growth of AlGaAs and InGaAs

We have used spectroscopic ellipsometry to perform real-time monitoring during metalorganic chemical vapor deposition growth of AlGaAs (on GaAs) and InGaAs (on GaAs and InP). Optical constants for these materials were obtained up to growth temperatures of 600 to 700°C. This information permits real-time extraction of composition and layer thickness from the raw ellipsometric data at sample rates on the order of 0.5 Hz. We describe closed-loop control of composition and total layer thickness on AlGaAs-based structures, including Bragg reflectors. In-situ data obtained on double-heterostructure quantum-well laser structures demonstrate that spectroscopic ellipsometry is an extremely powerful monitoring and quality-control tool, giving important real-time information on complex structures that would be difficult and time-consuming to obtain after growth.     

Steady-state torque control system with secondary-current feedback for three-phase squirrel-cage induction motors

This paper presents a highly stable steady-state torque control system with a feedback of a secondary current signal. The torque control system is constructed with a feedback of the secondary current (I₂) signal using a quick response magnetic-field sensor constructed with an amorphous core multivibrator bridge, which can solve the secondary resistance change problem for temperature variation in the IM. Moreover, we added a state feedback to the system to improve the response speed for the unit step function of a torque order. The I₂ sensor method has advantages especially at a low-speed range, in which conventional method using an integrator shows control errors.     

强激光的时间整形和空间整形——利用双折射透镜组实现激光束的空间整形

本文使用琼斯矩阵方法对双折射透镜组空间整形系统的光强透射率分布和工作特性进行了分析,并讨论了工程设计中参数的选择以及加工误差带来的影响等有关问题.     

双臂协调约束系统动力学问题探讨

本文讨论了双臂协调约束系统的动力学问题．文中系统地描述了该系统的适应于计算机程序化的建模方法；推导了系统的动力学方程，并给出了用约束矩阵的正交补矩阵处理系统所受协调约束的方法；编制了相应的计算机辅助分析程序ＤＲＣＲＣＳ，并用该程序对算例进行了动力学的数值分析。