英台地区天然水驱油藏的开发特点及稳产技术

掌握边底水运动规律，控制并利用活跃的边底水能量，是成功开发天然水驱油藏的关键。英台地区的英台、四方坨子和一棵树等三个油田均为天然水驱油藏，天然能量充足。油藏投入开发后初期含水较高，含水上升极快，造成产油量大幅度递减。针对其开发特点，适时采用大泵、电潜泵提液强采，通过大量补孔层间接替以及加密调整和扩边等稳产技术措施，确保了油藏以3％-5％的采油速度长期稳产，水驱采收率高达50％以上。     

浅谈开关电源中的平面变压器

与传统变压器相比较,使用平面变压器可以提高开关电源的功率密度,减小开关电源中磁性元件的体积。因此,近年来平面变压器被广泛地研究。文章介绍了平面变压器的结构,将平面变压器与传统变压器进行比较,分析综述了平面变压器在当今开关电源发展应用的优势和前景,并进一步说明了平面变压器中绕组间距选择,绕组交叉技术及PCB绕组设计等要点。     

整流逆变器在港口起重机械中的应用

根据起重机械特点,在港口机械中的交流变频控制系统中,整流逆变器(也称可逆PWM整流器,简称变流器)组合应用,提高作业效率,降低电能损耗,节省成本.     

Characterization of sintered coal fly ashes

Çan, Çatala?z?, Seyitömer and Af?in-Elbistan thermal power plant fly ashes were used to investigate the sintering behavior of fly ashes. For this purpose, coal fly ash samples were sintered to form ceramic materials without the addition of any inorganic additives or organic binders. In sample preparation, 1.5 g of fly ash was mixed in a mortar with water. Fly ash samples were uniaxially pressed at 40 MPa to achieve a reasonable strength. The powder compacts were sintered in air. X-ray diffraction analysis revealed that quartz (SiO₂), mullite (Al₆Si₂O₁₃), anorthite (CaAl₂Si₂O₈), gehlenite (Ca₂Al₂SiO₇) and wollastonite (CaSiO₃) phases occurred in the sintered samples. Scanning electron microscopy investigations were conducted on the sintered coal fly ash samples to investigate the microstructural evolution of the samples. Different crystalline structures were observed in the sintered samples. The sintered samples were obtained having high density, low water adsorption and porosity values. Higher Al₂O₃ + SiO₂ contents caused to better properties in the sintered materials.     

Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy,multivariate statistical tools,and artificial neural networks

Principal component regression (PCR), partial least squares (PLS), StepWise ordinary least squares regression (OLS), and back‐propagation artificial neural network (BP‐ANN) are applied here for the determination of the propylene concentration of a set of 83 production samples of ethylene–propylene copolymers from their infrared spectra. The set of available samples was split into (a) a training set, for models calculation; (b) a test set, for selecting the correct number of latent variables in PCR and PLS and the end point of the training phase of BP‐ANN; (c) a production set, for evaluating the predictive ability of the models. The predictive ability of the models is thus evaluated by genuine predictions. The model obtained by StepWise OLS turned out to be the best one, both in fitting and prediction. The study of the breakdown number of samples to be included in the training set showed that at least 52 experiments are necessary to build a reliable and predictive calibration model. It can be concluded that FTIR spectroscopy and OLS can be properly employed for monitoring the synthesis or the final product of ethylene–propylene copolymers, by predicting the concentration of propylene directly along the process line. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Investigation of the Correlation between Texture and Microstructure on a Submicrometer Scale in the TEM

In recent years the investigation of local texture and microstructure by analysis of electron backscatter diffraction patterns (EBSP) in the SEM has become a very powerful and popular method. With the introduction of SEM with field emission guns (FEG) the spatial resolution of EBSP measurements could be enhanced from 500 nm with a tungsten emitter to better than 50 nm. This evolution of SEM techniques raises the question whether transmission electron microscopy (TEM) still has fields of application in texture research. The present article answers this question with a clear “yes” and presents three examples of investigations where TEM is indispensable. The three examples comprise the investigation of the correlation between dislocation structure and deformation texture, a study on nucleation mechanisms of recrystallization in highly deformed metals and the investigation of microtexture and microstructure in nanocrystalline materials. Together with the presentation of these cases some of the necessary measurement techniques are described briefly. It is shown that TEM has to be applied when highest spatial resolution of orientation determination and imaging and high accuracy of orientation determination are to be reached, when the three‐dimensional and quantitative characterization of lattice defects is required or when materials with a high density of lattice defects are to be investigated.     

《华东电网500 kV变压器全过程管理技术规范>的实施要点

介绍了在执行《华东电网 5 0 0 k V变压器全过程管理技术规范》过程中 ,应强调管理是从基建到生产 ,从选型、安装到运行维护的全过程管理 ,重点介绍了变压器在订货过程中应高度重视诸如对于选用非强油循环的冷却方式、三相共体变压器、抗短路能力以及过励磁问题 ,也对变压器安装过程中水分控制、运行中气相色谱分析和局部放电试验要求作了简述     

Assessment of factors considered to be important in handling tasks by expert handlers

Twenty-eight experienced handlers, considered the best in two transport companies, were interviewed using a questionnaire consisting of partially closed-ended questions. They had to assess 20 videotape handling sequences showing two different handling methods to determine, for 10 factors and overall, which one was the best. They were asked about the inportance of these factors in their choices of the best method. The aims of the study were to verify whether there was a consensus among experienced handlers as to what was a good handling method and to identify the factors taken into consideration by them. Results show the lack of consensus on the best methods. Handlers favor different strategies depending on the worjk context and their own priorities.     

精密有源互感器的研制

本文介绍了精密有源电流互感器的原理和设计方法。该互感器的准确度达到０．０１级，线性度优于１×１０－５．     

粉煤灰少熟料水泥的研究

采用复合外加剂充分激发粉煤灰潜在活性，配制出早期强度较高的３２５＃少熟料水泥。本文介绍该水泥的配制原理与方法，分析了代替普通水泥配制建筑砂浆的可行性。