燃油加热炉改烧奥里油的尝试

奥里油是一种含乳化液较多的新油种，作者配合某厂机动处,对该油种进行了理论分析,并在连续加热炉上替代重油燃烧进行了有益的尝试。     

自动化控制系统在城市集中供热领域的应用

介绍自动控制系统在城市供热领域的应用,达到热网热平衡、节能环保及节省投资等目的。     

连续推钢式加热炉汽包假水位事故分析

分析棒线材厂加热炉汽包出现假水位造成的事故原因,并提出整改措施。     

Influence of base resistance on extracting thermal resistance for SiGe HBTs

In this article, the influence of base resistance on extracting thermal resistance for SiGe heterojunction bipolar transistors is studied and an improved approach for determining the junction temperature and thermal resistance is presented. The proposed method for extracting thermal resistance is based on the temperature sensitivity of the base–emitter (B–E) voltage when the device is biased with a fixed emitter current density. This approach not only takes into account the self‐heating during the different ambient temperature measurement but also revises the empirical equation of B–E voltage due to the influence of base resistance during the power dissipation increment measurement. Results are obtained for devices with different emitter lengths and fingers. Compared with the conventional method, the thermal resistance is about up to 15% improvement for the device with 0.3 × 1.9 μm² emitter area and 13.8% for the device with 0.3 × 13.9 μm² emitter area. The accurate thermal resistance implemented in HICUM model has resulted in better fit for transistor output characteristics. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V) by a microsecond-resolution transient technique

A microsecond-resolution pulse heating technique was used for the measurement of the heat of fusion of titanium and a titanium alloy (90Ti-6Al-4V). The method is based on rapid (50- to 100-s) resistive self-heating of the specimen by a high-current pulse from a capacitor discharge system and measuring, as functions of time, current through the specimen, voltage across the specimen, and radiance of the specimen. Melting of the specimen is manifested by a plateau in the measured radiance. The time integral of the net power absorbed by the specimen during melting yields the heat of fusion. The values obtained for heat of fusion were 272 J · g^–1 (13.0 kJ · mol^–1) for titanium and 286 J · g^–1 for the alloy 90Ti-6Al-4V, with an estimated maximum uncertainty of ±6% in each value.Paper presented at the Second Workshop on Subsecond Thermophysics, September 20–21, 1990, Torino, Italy.     

A new microsecond pulse-heating system to investigate thermophysical properties of solid and liquid metals

A new discharge system for resistive self-heating has been constructed for the measurement of accurate thermophysical properties. A constant-current pulse is used to heat metals over a time interval of 50 to 100 s, reaching temperatures up to the boiling point. New techniques have been developed to obtain sound speeds in the pulse-heated sample, emissivities, and vapor pressure. A new pyrometer allows the extension of the measured temperature range down to the melting point of copper.     

燃煤锅炉供热系统的模糊控制

介绍燃煤锅炉供热系统的自动化节能模糊控制方案,燃煤锅炉供热系统是一个大惯性的滞后系统,传统的单纯PID控制效果不理想,而基于工人熟练的经验和专家知识的模糊控制能够达到比较好的效果。系统中对控制参考量水温和炉膛负压这两个输入量模糊化处理,由控制规则推出输出模糊子集,再应用模糊推理合成规则得出PID的系数,PID控制器根据输出量来控制鼓风机、引风机、炉排电机和水泵的变频器。     

Thermal expansion of molybdenum in the range 1500–2800 K by a transient interferometric technique

The linear thermal expansion of molybdenum has been measured in the temperature range 1500–2800 K by means of a transient (subsecond) interferometric technique. The molybdenum selected for these measurements was the Standard Reference Material SRM 781 (a high-temperature enthalpy and heat capacity standard). The results are expressed by the relation where T is in K and l ₀ is the specimen length at 20°C. The maximum error in the reported values of thermal expansion is estimated to be about 1% at 2000 K and not more than 2% at 2800 K.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.     

Photothermal radiometric detection and imaging of surface cracks

This paper discusses surface crack detection by photothermal radiometric imaging (PRI). In PRI, also called dynamic infrared scanning, a surface is scanned with a spot of heat. Imperfections are detected by radiometrically sensing changes in the surface temperature of a small area in the vicinity of this spot. In the work described, cracks narrower than 25 µm (0.001 in.) in a lightly rusted steel surface have been detected. Indiscrete scanning an amplitude modulated heating beam is moved in steps, remaining at each location long enough to measure amplitude and phase of the AC temperature. Incontinuous scanning a constant intensity heating beam is moved continuously while the temperature deviations are measured. This paper presents methods of calculating amplitude and phase of surface temperature for discrete scanning and instantaneous temperature for continuous scanning across a surface crack. For a steel surface scanned by a watt-level laser beam, predicted surface temperature deviations when crossing the crack are several degrees Celsius, with expected radiometrically detected power several orders of magnitude above the detector noise. In experiments performed, both techniques easily detected narrow cracks in a smooth, clean surface. Discolorations and pits, on the other hand, generate a disturbing type of surface noise. This noise was minimized by differential detection. Based on results obtained, continuously scanned PRI with a fan-type heating beam and array detection could become a viable way of mapping surface cracks at practical scanning speeds.     

热流道注射模热流道板的设计

介绍了避免或减小热流道模具中热流道板加热后膨胀导致喷嘴的中心线产生的偏移的几种补偿结构,列举了3种热流道板加热功率的计算方法,可为热流道模具的设计提供参考。