07Cr12NiMoVNb耐热钢疲劳性能研究

对07Cr12NiMoVNb钢进行了常温和550℃旋转弯曲疲劳试验,结果表明,此钢不同晶粒度时疲劳断裂行为相近,室温疲劳强度与静强度关系符合奥金格经验公式,高温疲劳强度与静强度有关,但直线关系的系数不同于常温的,需重新总结。晶粒度大小影响疲劳强度,但室温表现的不明显,550℃表现为细晶钢疲劳强度高,这正好与蠕变行为相反,粗晶钢表现出较高的蠕变强度。     

热处理工艺对2.25Cr1MoR钢组织和力学性能的影响

本文研究了热处理工艺对2.25C r1M oR钢组织和力学性能的影响。结果表明,该钢在780℃时可获得良好的强韧化效果和较高的抗回火脆性能力,在此基础上得到了该钢板生产制造的热处理工艺参数。实践证明,该工艺合理可行。     

鞍钢汽车板的发展

鞍钢汽车板的生产能力和研发水平越来越为国内同行所关注。介绍亍鞍钢汽车板的发展历程、生产设备、品种、质量、技术合作及未来规划。     

武钢钢帘线用盘条的发展现状及营销分析

随着中国汽车工业的迅猛发展,子午线轮胎用材钢帘线盘条的需求量日趋扩大,同时市场竞争也更加激烈。利用五力模型(5种竞争力模型)理论对其进行了分析,提出了武钢发展对策。     

Intercomparison of Thermophysical Property Measurements on an Austenitic Stainless Steel

The results of an inter laboratory comparison of thermal conductivity, thermal diffusivity, specific heat capacity, and thermal expansion measurements on austenitic stainless steel in the temperature range between 20 and 1000°C are presented here. Mean values are presented for the physical properties studied. Reliable relative expanded uncertainties can be stated for the properties determined, which were achieved by applying good measurement practice, i.e., 3% for thermal expansion, 5% for specific heat capacity and thermal diffusivity, and 6% for thermal conductivity. The mean values derived from this intercomparison agree well with the results of a previous intercomparison in 1990. An erratum to this article is availabale at .     

鞍钢无缝钢管厂总体改造框架探讨

介绍了鞍钢无缝钢管厂发展的历程,阐述了必须对其进行技术改造的理由,提出了改造的具体原则及设想.     

钢丝圈的失效分析

对72B纺织用钢丝圈进行失效分析，发现钢丝圈使用性能不合格的主要原因是热处理炉仪表指示温度偏差太大及热处理工艺规范不合理，使得球化退火后的金相组织出现粗晶铁素体，淬火和回火后的金相组织出现铁素体、粒状渗碳体，使材料塑性增加，满足不了使用性能。     

Aspects of microstructure in low carbon steels produced by the CSP process

The solidification structure, microstructure evolution during rolling and precipitates with nanometers in dimension of the low carbon steels produced by CSP process with thin slabs have been studied in recent years. Important differences in microstructure and mechanical properties between the CSP products and the conventional one were observed. These differences may arise from the much rapider solidification rate and cooling rate after casting of the thin slabs. Some aspects of the microstructure for the low carbon steels of the CSP thin slabs are summarized and compared with the conventional one.     

应用型计算机专业学生培养模式探讨

本文探讨了应用型本科院校中计算机专业学生的培养模式,提出了培养高级计算机应用人才的根本途径和当前要解决的主要问题。     

感应电动机转子磁场定向的一种自校准算法

介绍感应电动机矢量控制系统中转子磁场定向的一种自校准算法。该算法只需检测电动机的定子电流和转速信号，并由具有严格正实误差传递函数的参数调整算法保证其稳定性和收敛性。数值仿真实验说明了算法的性能。