助卷辊电液伺服系统相关辨识法研究

用相关辨识法分析了卷取机助卷辊电液伺服系统的频率特性 ,采用 Levy法求出系统的传递函数 ,并且给出该系统频率特性相关参数。     

Influence of process parameters on thermal-rate treatment of ZA42 alloy

Sand casting process and directional solidification technique combining thermal-rate treatment(TRT) were used. The influence of process parameters on TRT was investigated according to the values of impact toughness. At the same time, the mechanism of TRT was discussed. The results showed that TRT can improve the impact toughness of this alloy, while the hardness is basically constant. The time of heat preservation should not be more than 5min. Different forms of cooling intensification additive have different effects among which the zinc ingot solidified in graphite mold is the best one that can improve impact toughness of samples by more than 80%. With increasing the cooling temperature, the value of α(Al) crystal lattice constant increases. The element Sb has negative effect on TRT.     

有滞后环节的系统的闭环鲁棒辨识方法

提出一种新的针对带滞后环节的任意阶系统的闭环辨识方法。通过“三步法”，实现在闭环条件下的被控制对象的传递函数参数的辨识，所提出方法具有很强的鲁棒性。仿真例子表明该方法的有效性。     

离心泵性能参数的自动测定和自动控制

通过将计算机技术应用于离心泵性能参数的研究，实现了离心泵性能参数的自动测定和自动控制。     

Identification of a minor component of the sex pheromone ofLeucoptera malifoliella (Lepidoptera,lyonetiidae)

A new minor component in the female volatile extract ofLeucoptera malifoliella (Costa) (Lepidoptera, Lyonetiidae) has been identified as 5,9-dimethyloctadecane (2). The amount detected of the minor compound2 ranged from 4 to 8% in comparison with the major component 5,9-dimethylheptadecane (1). Neither compound has been found in the male volatile extract. The identification has been based on its spectroscopic properties and Chromatographic behavior in comparison with an authentic synthetic sample. The synthesis has been carried out through a short route from 2,6-dimethylcyclohexanone (3). In field tests, compound2 appears to act as a Synergist of the major component1 when mixed with the latter in a 1000.1– 5 ratio.     

Determination of the solubility parameter of poly(ethylene oxide) at 25°C by gas-liquid chromatography

The solubility parameter of poly(ethylene oxide) at 25°C has been determined using the method developed by DiPaola-Baranyi and Guillet, by the extrapolation of the values of the interaction parameter χ, at high temperatures, ranging from 70°–90°, 90°–110° and 110°–130°C down to 25°C. The values of the solubility parameter obtained, depending on the temperature ranges employed, are 9.8, 9.9 and 10.1, respectively.     

低温等离子体处理纤维素纤维的机理和性能研究

本文应用不同技术参数的低温等离子体对Lyocell纤维进行处理,借助SEM等手段对其表面特征和物理性能进行研究,通过化学热力学和化学动力学,对反应机理做了研究和分析,证明了通过这种新型手段对Lyocell纤维进行接枝和改性的可行性和优越性,并针对Lyocell纤维的一些相关性能进行了处理前和处理后的比较,结果表明低温等离子体处理后的Lyocell纤维在不降低物理机械性能的同时很大程度上减少了纤维的原纤化。     

广义线性模型与非线性模型参数的统计推断

概述了广义线性模型(含半参数广义线性模型)与非线性模型研究的新进展,着重讨论了它们参数估计的统计推断。近年来,广义线性模型与非线性模型的研究发展迅速,有着广泛的应用前景。     

Adaptive receding horizon control for constrained MIMO systems

An adaptive control algorithm for open-loop stable, constrained, linear, multiple input multiple output systems is presented. The proposed approach can deal with both input and output constraints, as well as measurement noise and output disturbances. The adaptive controller consists of an iterative set membership identification algorithm, that provides a set of candidate plant models at each time step, and a model predictive controller, that enforces input and output constraints for all the plants inside the model set. The algorithm relies only on the solution of standard convex optimization problems that are guaranteed to be recursively feasible. The experimental results obtained by applying the proposed controller to a quad-tank testbed are presented.     

Variance analysis of identified linear MISO models having spatially correlated inputs,with application to parallel Hammerstein models

This contribution concerns variance analysis of linear multi-input single-output models when the inputs are temporally white but where different inputs may be correlated. An expression is provided for the variance of a linearly parametrized estimate of the frequency response function from one block, i.e. from one input to the output. In particular, this expression reveals that the variance increases in one block when the number of estimated parameters in another block is increased, but levels off when the number of parameters in the other block reaches the number of parameters in the block in question. It also quantifies exactly how correlation between inputs affects the resulting accuracy and a graphical representation is provided for this purpose. The results are applicable to parallel MISO Hammerstein models when the nonlinearities are known and generalize an existing variance expression for this type of model.