非圆弧拱坝温升与温降荷载组合的比较

列举了在径向水压力与温升或温降两种荷载组合下圆弧拱与5种非圆弧拱的拱坝多拱梁法分析成果,从位移、应力、岸坡稳定性等方面作了比较。对于两种荷载组合下了解、掌握各类拱的拱坝特性提供了充实的资料,在此基础上,提出了温降组合一般起控制作用的见解     

A new approach to the mechanism of chlorine evolution: Separate examination of the kinetic steps using ac impedance on a rotating thin ring electrode

In the absence of a bulk diffusion effect, it is shown for the first time that the impedance spectra for the chlorine evolution reaction on a rotating thin ring electrode comprise three consecutive semicircles in the capacitive half of the complex plane. The first (highest frequency) semicircle is due to the charge-transfer resistance for chloride discharge and the simultaneous chlorine adsorption coupled to the double-layer capacitance. The second semicircle (around 5 Hz) is due to the adsorption and desorption of a chlorine intermediate. The third (lowest frequency, around 0.5 Hz) semicircle is due to the relaxation of surface oxygen species. The impedance data allow the steps of the overall reaction to be examined individually. On a Pt surface the rate of chloride discharge and simultaneous chlorine adsorption (the admittance of the first semicircle) is first order with respect to chloride concentration and has a potential-dependence close to 58 mV/decade. The rate of the adsorption and desorption process (the admittance of the second semicircle) is second order with respect to chloride concentration, and has a potential dependence close to 30 mV/decade. The time constant for the adsorption/desorption processes is ca 20 ms, independent of electrode potential in the range studied. These features are consistent with a mechanism in which a faster discharge reaction (Cl⁻ Cl_ad + e) is followed by a slower surface combination reaction (2Cl_ad → Cl₂), but inconsistent with mechanisms in which ion + atom desorption is predominant, the initial chloride discharge is slow, or a unipositively charged chlorine species is involved.     

阻尼式限流器参数的设计选择

本文阐述阻尼式限流器参数设计选择和产品系列规划的依据原则，并结合实例说明实施步骤与方法，以有助于限流器的正确设计与选用。     

大坝水平位移监控指标拟定的混合法

用混合法拟定了大坝水平位移的监控指标，即通过结构分析和建立数值 模型，计算大坝水平位移的水压分量和给定概率水平下的温度分量极值，进而拟定水平位移 监控指标，并给出了实例。     

罗茨真空泵的溢流阀与旁通阀的组合

在简要地介绍了罗茨泵功能的基础上，通过溢流阀的改进设计，使溢流阀成为既能旁通又能溢流的组合阀，罗茨泵的功能将更加完备。     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

双光束Raman组束研究

着重研究了双光束拉曼组束改善准分子激光光束质量。通过理论计算得出，在畸变泵浦光作用下可以获得近衍射极限Ｓｔｏｋｅｓ光的放大。并在稳态和瞬态激光脉冲的条件下，讨论了Ｒａｍａｎ工作介质的选择。在此基础上进行了氯化氙准分子激光在氢气中的双光束Ｒａｍａｎ组束实验研究，近衍射极限Ｓｔｏｋｅｓ光在获得功率放大的同时，其远场分布保持不变。激光聚焦亮度提高约３０００倍。最后讨论了放大自发辐射的抑制。     

毫米波谐波振荡器的Volterra级数分析法

本文基于Ｖｏｌｔｅｒｒａ级数法和非线性转移函数理论，提出了一种分析毫米波谐波振荡器的新方法，给出了描述其非线性特性的决定方程，通过求解一组非线性代数方程，便可计算出谐波振荡器的振荡频率和幅度。文中给出了具体分析实例，并与谐波平衡法等进行了比较，结果表明：这种方法具有理论严密、准确性高、适用范围广等特点，特别是利用一次决定方程的结果作为其它非线性数值分析方法的初始估值，则可大大地节约计算时间，并容易     

电子天平用于外标法标准系列精确配制方法的研究

研究了用电子天平对外标法标准系列配制过程中吸管加入溶液体积进行计量的方法。结果表明,电子天平计量法可以将吸管加入溶液体积的计量精度提高2个数量级,从而大大提高了工作曲线的准确性和线性。该方法可推广应用于各种需要对吸管加入溶液体积进行精确计量的实验室工作。