梯度折射率棒中传播的高斯光束轨迹解析解及其存在条件的讨论

本文提出光束轨迹方程的一般解，导出解析解的存在条件，推广了文献［１］的光线传播理论，文中以一特定梯度折射率棒为例，讨论了高斯光束在棒中的传播特性。     

Trade-off analysis on cost and manufacturing technology of an electronic product: Case study

A trade-off analysis on the cost and system packaging metrics of an electronic product aimed at the commercial/retail industry has been carried out. By comparing the system cost and packaging metrics with those of comparable consumer products, we have determined that there is opportunity for significant cost, size, and weight reduction of the overall electronics packaging system. These include the use of fine pitch IC packages, smaller discrete components, denser PCB wiring technology, double sided IC package surface mount, surface mount connectors, and improved plastics for the product housing. The analysis concluded that PCB area reduction of 40%, using a single PCB instead of three boards, reduction in board cost of over 50% and product weight reduction of over 28% are possible using available technologies.     

静态水热脱铝处理对HZSM-5分子筛的结构、酸性和催化性能的影响

开发了一种静态水热脱铝的方法。HZSM-5经此法处理后,正戊烷的裂解活性增加,脱氢和芳构化性能加强。可用改变处理温度的方法来控制脱铝的程度。用XRD和吡啶吸附红外技术进行了研究。HZSM-5分子筛催化剂性能的变化用非骨架铝产生的强L酸中心来解释。     

微波电子回旋共振等离子体技术及其应用

微波电子回旋共振等离子体是淀积薄膜、微细加工和材料表面改性的一种重要手段。由于这种等离子体电离水平高,化学活性好,可以用来实现基片上薄膜的室温化学气相淀积和反应离子刻蚀,因此对于微电子学、光电子学和薄膜传感器件的发展,这种等离子体会具有重要的意义。此外,采用微波电子回旋共振等离子体原理,没有灯丝的离子源可以提高离子源的使用寿命,可以增加离子束的束流密度。可以确信,微波电子回旋共振等离子体的发展,将把离子源技术提高到一个新的水平。显然,这必将对材料表面改性工艺,包括离子注入掺杂等工艺的发展发挥作用。自从1985年以来,为了得到大容积等离子体而发展了微波电子回旋共振多磁极等离子体,这些技术在薄膜技术、微细加工以及材料表面改性中的应用前景是乐观的。我们将在本文中,介绍微波电子回旋共振等离子体的原理及其应用。     

OPERATOR-SPLITTING METHOD FOR ANALYSIS OF CAVITATION IN LIQUID-LUBRICATED HERRINGBONE GROOVED JOURNAL BEARING

ＮＯＭＥＮＣＬＡＴＵＲＥｃ　ｒａｄｉａｌｃｌｅａｒａｎｃｅｈ　ｆｉｌｍｔｈｉｃｋｎｅｓｓ ｈ　ｄｉｍｅｎｓｉｏｎｌｅｓｓｆｉｌｍｔｈｉｃｋｎｅｓｓ (ｈ/ｃ)Ｌ/Ｄ　ｒａｔｉｏｏｆｌｅｎｇｔｈｔｏｄｉａｍｅｔｅｒｐ　ｆｉｌｍ ｐｒｅｓｓｕｒｅｅ　ｅｃｃｅｎｔｒｉ     

Effect of Iron on the Color of Barley and Other Cereal Porridges

ABSTRACT: Iron added as ferrous sulfate at 500 mg*kg⁻¹ to rice, oats, whole grain wheat, or proanthocyanidin-free barley porridge caused significant changes in the Hunter "L", "a", and "b" values but the visual appearance of these porridges remained satisfactory. Porridge made with normal barley flour fortified with 500 mg*kg⁻¹ of iron developed an unappealing gray color with ferrous sulfate, ferrous fumarate, or electrolytic iron, 3 salts differing in solubility. At 100 and 250 mg*kg⁻¹ of iron, the discoloration of normal barley porridge was less pronounced, but still objectionable. When fortified with 50 mg*kg⁻¹ of iron, normal barley porridge had a slight color change but was not noticeably gray. Thus barley-containing foods can be fortified with a soluble iron compound at the level of iron used in enriched flour and similar cereal-grain foods for the general population without developing an unattractive color.     

信令网的核心--下一代信令转接点

本文在讨论了下一代信令转接点在满足传统信令网络功能的基础上，着重介绍了下一代的信令转接点上实现的号码携带、灵活路由等新业务，并如何实现传统STP面向下一代网络的平滑过渡。     

Growth condition of iodine-doped n+-CdTe layers in metal-organic vapor phase epitaxy

Iodine doping of CdTe layers grown on (100) GaAs by metal-organic vapor phase epitaxy (MOVPE) was studied using diethyltelluride (DETe) and diisopropyltelluride (DiPTe) as tellurium precursors and ethyliodine (EI) as a dopant. Electron densities of doped layers increased gradually with decreasing the growth temperature from 425°C to 325°C. Doped layers grown with DETe had higher electron densities than those grown with DiPTe. When the hot-wall temperature was increased from 200°C to 250°C at the growth temperature of 325°C, doped layers grown with DETe showed an increase of the electron density from 3.7×10¹⁶ cm⁻³ to 2.6×10¹⁸ cm⁻³. On the other hand, such an increase of the electron density was not observed for layers grown with DiPTe. The mechanisms for different doping properties for DETe and DiPTe were studied on the basis of the growth characteristics for these precursors. Higher thermal stability of DETe than that of DiPTe was considered to cause the difference of doping properties. With increasing the hot-wall temperature from 200°C to 250°C, the effective ratio of Cd to Te species on the growth surface became larger for layers grown with DETe than those grown with DiPTe. This was considered to decrease the compensation of doped iodine and to increase the electron density of layers grown with DETe. The effective ratio of Cd to Te species on the growth surface also increased with decreasing growth temperature. This was considered to increase the electron density with decreasing growth temperature.     

分散图象压缩的遗传算法

基于分形和PIFS函数的特点，提出一种改进的遗传算法用于分形压缩分块的定义域匹配搜索算法。该方法克服了原来分形图象压缩中分类匹配算法固有的局部最优性和随机搜索的缺点，是一种具导引的全局优化的搜索算法。分析和实验表明，该方法的图象压缩比高，解码质量好，若应用遗传算法的并行性，其编码速度也得到提高。     

宁波溪口抽水蓄能电站下库面板堆石坝观测资料分析

溪口蓄能电站下库面板堆石坝最大坝高44.5m,施工期间布置的原型观测项目有坝体内部沉降和水平位移、周边缝和板间缝位移、面板应变以及坝基孔隙水压力。根据观测仪器自埋设至2000年的观测资料,文中分析了各项观测物理量的变化规律和变化趋势,综合评价了大坝的工作性态。