Tuning the Dimensions of C60‐Based Needlelike Crystals in Blended Thin Films

A new ordered structure of the C₆₀ derivative PCBM ([6‐6]‐phenyl C₆₁‐butyric acid methyl ester) is obtained in thin films based on the blend PCBM:regioregular P3HT (poly(3‐hexylthiophene)). Rapid formation of needlelike crystalline PCBM structures of a few micrometers up to 100 μm in size is demonstrated by submitting the blended thin films to an appropriate thermal treatment. These structures can grow out to a 2D network of PCBM needles and, in specific cases, to spectacular PCBM fans. Key parameters to tune the dimensions and spatial distribution of the PCBM needles are blend ratio and annealing conditions. The as‐obtained blended films and crystals are probed using atomic force microscopy, transmission electron microscopy, selected area electron diffraction, optical microscopy, and confocal fluorescence microscopy. Based on the analytical results, the growth mechanism of the PCBM structures within the film is described in terms of diffusion of PCBM towards the PCBM crystals, leaving highly crystalline P3HT behind in the surrounding matrix.     

Enhanced Photoelectrochemistry in CdS/Au Nanoparticle Bilayers

Three different configurations of Au‐nanoparticle/CdS‐nanoparticle arrays are organized on Au/quartz electrodes for enhanced photocurrent generation. In one configuration, Au‐nanoparticles are covalently linked to the electrode and the CdS‐nanoparticles are covalently linked to the bare Au‐nanoparticle assembly. The resulting photocurrent, φ = 7.5 %, is ca. 9‐fold higher than the photocurrent originating from a CdS‐nanoparticle layer that lacks the Au‐nanoparticles, φ = 0.8 %. The enhanced photocurrent in the Au/CdS nanoparticle array is attributed to effective charge separation of the electron–hole pair by the injection of conduction‐band electrons from the CdS‐ to the Au‐nanoparticles. Two other configurations involving electrostatically stabilized bipyridinium‐crosslinked Au/CdS or CdS/Au nanoparticle arrays were assembled on the Au/quartz crystal. The photocurrent quantum yields in the two systems are φ = 10 % and φ = 5 %, respectively. The photocurrents in control systems that include electrostatically bridged Au/CdS or CdS/Au nanoparticles by oligocationic units that lack electron‐acceptor units are substantially lower than the values observed in the analogous bipyridinium‐bridged systems. The enhanced photocurrents in the bipyridinium‐crosslinked systems is attributed to the stepwise electron transfer of conduction‐band electrons to the Au‐nanoparticles by the bipyridinium relay bridge, a process that stabilizes the electron–hole pair against recombination and leads to effective charge separation.     

江苏复杂小断块油藏老井侧钻实践与认识

利用停关、低效井实施老井侧钻,其条件包括油藏、井身及技术经济等3个方面。侧钻效益的好坏与油藏类型、侧钻目标有着很大关系,侧钻断块油层、挖掘构造高部位剩余油成功率高,边底水、高渗透油藏侧钻效果好。实践表明,老井侧钻是提高江苏复杂小断块油藏开发效果,降低投资、提高效益的一项重要手段。     

可拓知识空间和可拓知识网格模型(Ⅱ):可拓知识网格

第1部分中已介绍了可拓知识空间定义和相关操作，以及可拓知识空间关联函数计算方法。这一部分进一步建立可拓知识空间语义网、可拓知识网格和可拓知识网格服务，并给出实例和相关的分析讨论。     

固体热容激光器的设计和功率标定

固体热容激光器（SSHCL）作为下一代最佳候选高功率激光器，引起人们广泛关注。介绍了固体热容激光器工作原理、光抽运期间介质板内荧光分布和温度分布、介质板冷却以及功率标定。详细讨论了激光介质温度对激光输出功率的影响，对有关设计要点也作了相关分析。     

塔里木盆地雅—轮地区断层封堵性研究

塔里木盆地雅—轮地区大部分圈闭及油气藏的形成与断裂作用密切相关,对断层封堵性的综合研究已成为该地区油气勘探的重要因素。应用地质定性分析、Allen剖面分析及断层涂抹量计算等方法,通过对研究区4个典型断层封堵油气藏的系统解剖研究,建立雅—轮地区断裂封堵性评价标准,对雅—轮地区断层的封堵性进行综合评价。雅—轮地区断层整体封堵效果良好,断层在圈闭形成和油气聚集过程中起着重要的控制作用,形成一系列沿断层带状分布的油气藏。亚南断裂的封堵效果东部要优于西部,下部要优于上部。轮台断裂在不同部位、不同深度均存在着不同的封堵性能,封堵非均质性明显,总体显示断裂东部地区(也根附近)的封堵性要好于西部雅南地区。      

Finite element piezothermoelasticity analysis and the active control of FGM plates with integrated piezoelectric sensors and actuators

 An efficient finite element model is presented for the static and dynamic piezothermoelastic analysis and control of FGM plates under temperature gradient environments using integrated piezoelectric sensor/actuator layers. The properties of an FGM plate are functionally graded in the thickness direction according to a volume fraction power law distribution. A constant displacement-cum-velocity feedback control algorithm that couples the direct and inverse piezoelectric effects is applied to provide active feedback control of the integrated FGM plate in a closed loop system. Numerical results for the static and dynamic control are presented for the FGM plate, which consists of zirconia and aluminum. The effects of the constituent volume fractions and the influence of feedback control gain on the static and dynamic responses of the FGM plates are examined. Received: 13 March 2002 / Accepted: 5 March 2003 The work described in this paper was supported by a grant awarded by the Research Grants Council of the Hong Kong Special Administrative Region, China (Project No. CityU 1024/01E).     

A three-dimensional FE analysis of large deformations for impact loadings using tetrahedral elements

 A three-dimensional dynamic program for the anaysis of large deformations in contact-penetration problems is developed using the finite element Lagrangian method with explicit time integration. By incorporating a tetrahedral element, which allows a single-point integration without a special hourglass control scheme, this program can be more effective to the present problem. The position code algorithm is used to search contact surface. Eroding surfaces are also considered. The defense node algorithm was slightly modified for the calculation of contact forces. A study of obliquity effects on metallic plate perforation and ricochet processes in thin plates impacted by a sphere was conducted. It is well simulated that on separation of two parts of the sphere, the portion still within the crater tends to perforate, while the portion in contact with the plate surface ricochets. This deformation pattern is observed in experiments, especially at high obliquities. A long rod that impacts an oblique steel plate at high impact velocity was also simulated in order to study the dynamics of the rod caused by the three dimensional asymmetric contact. The agreement between simulated and experimental results is quite good. Fracture phenomena occuring at high obliquity deserves further investigations. Received: 20 February 2002 / Accepted: 20 September 2002     

一种新的网络对象存储设备研究

Internet的飞速发展对于存储系统的可扩展性提出了很高的要求,也带来了由数据模型与存储模型的不一致问题引起的服务器性能瓶颈现象.针对这些情况,本文提出了网络对象附属存储设备(NAOSD)的概念,其利用设备处理器的能力直接支持结构化数据存储.这一设计减少了存储系统中数据服务器的负载,增加了系统吞吐量.同时,研究了该设备原型在集群环境中的应用,提出了数据/元数据统一存储与查询式数据定位机制.分析表明,这些机制能够较显著地提高系统扩展性——数据访问时间随系统规模的扩大呈对数增长,优于传统的映射定位机制.我们已经模拟实现了NAOSD,并在性能比较测试中取得了较好的效果.