有源OTA─C高通滤波器

本文提出了一种实现高通滤波特性的高阶ＯＴＡ－Ｃ滤波器，其实验结果和理论分析相一致。     

Purification and Characterization of an Endoprotease from Melon Fruit

An endoprotease was purified from melon fruit (Cucumis melo L.) by ammonium sulfate precipitation, gel filtration and ion-exchange chromatography using t-butyloxycarbonyl-Ala-Ala-Pro-Leu p-nitroanilide as a substrate. The molecular weight was estimated as 26,000 and isoelectric point pH 9.5. It preferentially hydrolyzed peptide bonds of the carboxyl terminal sides of Leu, Ala, His, Gin, and Am. Activity was strongly inhibited by diisopropyl phosphofluoridate, indicating the serine protease nature of the enzyme. The migration distance on electrophoresis, molecular weight and substrate specificity differed from cucumisin, a known protease from melon. This unusual protease may have potential for special food treatment applications.     

An element-free Galerkin method approach for estimating sensitivity of machined surface parameters

The main objective of this study is to implement a parameter sensitivity analysis method to be used in the search of optimal machining conditions with respect to surface quality. Presently, the element-free Galerkin (EFGM) approximating functions are used to evaluate the properties of machined surfaces with cutting parameters when turning AISI 4140 steel using arbitrary sets of experimental values and the EFGM approximation functions, based on the moving least-squares method, in order to obtain the sensitivities through proper local derivations. This method shows the sensitivity of each surface parameter for each input variable. The variables investigated were cutting speed (v_c), depth of cut (a_p), feed rate (f) and the surface roughness (R_a). The sensitivity results showed that the feed rate has the highest influence on surface roughness when turning AISI 4140 steel followed by cutting speed and depth of cut.     

焦化厂门型吊改造

从门型吊承轨梁的受力分析入手．研究剖析了原结构产生裂纹的诸多原因．通过理论计算。做出了承轨梁与桁架连接接点的最佳设计．提出了符合现场实际情况的更换承轨梁的最佳方案，为类似设备改造提供了可借鉴的经验。     

Interoceptive Sensitivity and Self-Reports of Emotional Experience.

People differ in the extent to which they emphasize feelings of activation or deactivation in their verbal reports of experienced emotion, termed arousal focus (AF). Two multimethod studies indicate that AF is linked to heightened interoceptive sensitivity (as measured by performance on a heartbeat detection task). People who were more sensitive to their heartbeats emphasized feelings of activation and deactivation when reporting their experiences of emotion over time more than did those who were less sensitive. This relationship was not accounted for by several other variables, including simple language effects. Implications for the role of interoception in experienced emotion and the validity of self-reported emotion are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

卫星编队飞行中的队形设计研究

目前关于卫星编队飞行的研究有显著的增加。多颗从属卫星(从星)在近距离内与主卫星(主星)组成特定的队形以完成相应的任务,是卫星编队飞行的特点及潜在优势。卫星在编队飞行时,其队形定义为以各颗卫星质心为顶点所构成的几何形状,而队形设计则是根据队形的几何形状求出各卫星的轨道根数(其中主星的轨道根数可以根据任务的要求事先确定)。基于相对轨道根数法,根据卫星相对运动方程,提出了“自然队形”的概念及队形设计的一般方法,并给出了具体的例子。     

冷41-平14"L"型水平井轨迹优化与控制技术

冷41-平14井受地面条件的限制,靶前位移小,为保证中间套管和完井管柱的顺利下入,剖面设计为“反向造斜-稳斜-降斜-正向造斜-水平段”的“L”型。简要介绍了冷41-平14“L”型水平井的设计概况,详细介绍了该井井眼轨道优化设计原则和设计结果,以及实钻井眼轨迹连续控制技术。该井精确命中A、B靶,两靶处的井斜角、方位角和垂深等达到了设计要求,在A靶实现了软着陆。该井井眼轨道优化设计和井眼轨迹控制技术为类似水平井的井眼轨道设计和轨迹控制提供了有益的借鉴。     

天然气合成油技术

综述了天然气合成气技术、气转液（GTL）技术以及天然气合成油加工精制工艺，对目前比较成熟的天然气合成油工艺技术进行了比较；介绍了天然气合成柴油、润滑油、煤油以及石脑油的优势，并简述了目前世界范围内筹建GTL厂的情况，最后对中国天然气合成油发展提出了建议。     

压阻式硅微加速度传感器的结构设计与仿真

一般的压阻式硅微加速度传感器结构多采用单梁加质量块的形式,这种形式的传感器灵敏度比较高,但它的横向效应较难克服,文中提出一种四梁结构的加速度传感器,通过仿真计算,说明该结构的加速度传感器具有良好的综合特性.     

水平井眼轨迹对气井出砂趋势及工作制度的影响

出砂是影响油气井正常生产的重要因素之一。借助FEPG有限元程序自动生成平台，建立了三维应力场弹塑性地层出砂模型，并运用有限元法计算分析了不同轨迹的裸眼井井壁周围的有效塑性应变分布规律及出砂趋势，研究了气藏压力衰竭对完井方式的影响。研究表明，水平井眼轨迹对出砂有重要的影响，同一地应力环境下向不同方位延伸的水平井在投产时应该采取不同的生产压差和不同的生产制度，水平井眼轨迹对出砂的影响程度随着3个地应力差异的增大而加剧。气藏压力衰竭对井壁的稳定性和出砂趋势都有重要影响。随着气藏压力的衰竭，井壁稳定性将变得越来越差，最终导致井筒出砂。因此，对气井完井不仅应该考虑到气藏开发初期地层的稳定性状况，而且还应该考虑到气藏压力衰竭后可能出现的井壁失稳问题。