砖烟囱集团装药定向爆破拆除

对一座 40 m 高的砖烟囱,采用TNT集团装药实施定向倒塌拆除爆破.介绍了该烟囱拆除爆破工艺技术,爆破参数和施工方法.     

焦炉装煤烟尘治理的烟气量计算

通过对焦炉装煤烟尘治理的烟气量计算和研究,提出不同治理系统的烟气量计算方法及应采取的措施。     

Effect of electricity tariff on the optimum insulation-thickness in building walls as determined by a dynamic heat-transfer model

Thermal insulation is one of the most effective energy-conservation measures in buildings. Despite the widespread use of insulation materials in recent years, little is known regarding their optimum thickness under dynamic thermal conditions. Insulated concrete blocks are among the units most commonly used in the construction of building walls in Saudi Arabia. Typically, the insulation layer thickness is fixed at a value in the range 2.5–7.5 cm, regardless of the climatic conditions, type and cost of insulation material, and other economic parameters. In the present study, a numerical model based on a finite-volume, time-dependent implicit procedure, which has been previously validated, is used to compute the yearly cooling and heating transmission loads under steady periodic conditions through a typical building wall, for different insulation thicknesses. The transmission loads, calculated by using the climatic conditions of Riyadh for a west-facing wall, are fed into an economic model in order to determine the optimum thickness of insulation (L_opt). The latter corresponds to the minimum total cost, which includes the cost of insulation material and its installation plus the present value of energy consumption cost over the lifetime of the building. The optimum insulation thickness depends on the electricity tariff as well as the cost of insulation material, lifetime of the building, inflation and discount rates, and coefficient of performance of the air-conditioning equipment. In the present study, the effect of electricity tariff on the computed optimum insulation thickness is investigated. Different average electricity tariffs are considered; namely, 0.05, 0.1, 0.2, 0.3 and 0.4 SR/kWh (designated as Cases 1–5, respectively; 1 US$ = 3.75 Saudi Riyals). Results using moulded polystyrene as an insulating material show that the values of L_opt are: 4.8, 7.2, 10.9, 13.7 and 16.0 cm for Cases 1–5. Under the conditions of optimal insulation thickness for each electricity tariff, Case 1 gives the lowest total cost of 17.4 SR/m², while Case 5 gives the highest total cost of 53.1 SR/m². Corresponding thermal performance characteristics in terms of yearly total and peak transmission loads, R-value, time lag and decrement factor are presented.     

Analysing the Diversity of Water Pricing Structures: The Case of France

This paper presents the results of a 2003 national survey of urban water pricing structure implemented by 429 district level water utilities. After providing some background elements on the diversity of existing water pricing structures, the paper shows how each structure can be used to achieve different management objectives (water allocation efficiency, costs recovery, and equity). It then describes the structures adopted by French water utilities, showing that flat rate are rarely adopted; declining blocks frequently used; and increasing blocks pricing which should be used to promote water use efficiency remain extremely rare. A statistical clustering is then conducted and a typology of situations elaborated. The paper concludes with highlighting that current pricing structures are influenced by past practices and that the dominant objective of water utilities is to cover costs.     

漳河灌区末级渠系农业水费补贴机制的思考

农村税费改革以来，漳河灌区末级渠系面临着建设与管理缺位、投入不足、责任不明等问题，虽然灌区管理单位也进行了水价改革等积极有效的探索与实践，取得了一定成效，但仍有一些问题亟待破解。结合漳河灌区实际．应加强末级渠系建设奖补基金筹措并改进补发方式，要充分发挥农民用水户协会的作用；在农业水费补贴机制方面．建议将基本水费纳入财政直补范围，建议将农业水费直补金统一发放到末级渠系农民用水户协会。     

响洪甸电站引水隧洞进口水下岩塞爆破施工

响洪甸抽水蓄能电站水下岩塞爆破施工要求高,技术新,难度大.由于施工准备充分,并进行了一系列材料及施工试验,工程进展顺利,排孔造孔、导洞药室开挖、药管与起爆体加工、装药与堵塞、网络施工、充水补气等工程施工质量符合设计要求,岩塞爆破准时成功起爆.     

攀钢2000 m3高炉冶炼钒钛矿开炉准备工作探讨

重点阐述了2000 m3高炉冶炼钒钛矿开炉前的烘炉、焦炭质量改善、沟下过筛、料流轨迹测试等工作。通过广泛的考察学习和详细的应急预案,丰富了铁厂的快速开停炉内涵,不仅使本次开炉取得了成功,而且为以后的开炉提供了较好的参考。     

地球同步轨道卫星表面电位探测一类方法初探

介绍了地球同步轨道卫星表面由于周遭的等离子体环境而造成的充电现象及其危害,并提出一类利用压电驱动式振动直接电场强度测量的表面电位测量方法。单一传感器可以测量卫星表面相对于卫星结构的电位差,多个传感器配合将可以测量卫星表面的不等电位差以及卫星表面相对太空环境的电位差。     

唐钢连铸坯热送热装实践

结合唐钢连铸坯热送热装工作实践，提出做好生产组织协调提高企业整体管理水平是热送热装工作的关键，多品种，批量生产是提高热送热装率的有利条件。     

基于机会约束的电动汽车充光储一体化充电站容量优化方法

针对电动汽车充电站建设运营成本高,土地利用率较低,功能单一的缺点,提出了电动汽车充光储一体化充电站的容量优化方法。考虑光伏出力及电动汽车充电负荷的不确定性,研究在不确定性环境下的容量配置问题,以保证优化方案的可靠性。基于机会约束规划,以建设运营成本最小为目标建立电动汽车充光储一体化充电站容量配置模型,通过序列运算理论将模型中含有随机变量的约束进行确定性转化,采用CPLEX作为模型的求解工具。算例验证了所提模型及方法的有效性。