一种新型半桥不对称PW M控制变换器

介绍了一种适用于DC／DC半桥变换的不对称PWM控制方案，分析了电路的工作原理，给出了150W变换器的仿真波形和实验结论，结果表明，该控制方案能在恒定开关频率下对变换器实现高效率的软开关控制。     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

具有大电流输出能力的开关电源

本文介绍大电流输出的开关电源芯片MAX1623的特点，设计原理和典型应用电路。     

PIC单片机在激光电源中的应用研究

论述了单片机控制激光电源的原理，提出了产生PWM控制的基本思想及整个控制系统的硬件组成和软件设计方法。     

一种可调节电流的电流型PWM直流转换器

介绍一种用于驱动发光二极管(LED)的可调节电流的电流型PWM直流转换器.该直流转换器由于接有一个外接电阻,可以通过调节外接电阻的大小来调节输出电流.输出电流调节范围在5～40mA之间.主要分析了电路的输出电流调节功能,和这种输出电流可变的电流型PWM直流转换器的电流和电压反馈环的反馈实现原理.并简要介绍了这种带电流调节功能的PWM直流转换器的工作原理,最后给出了电路在输出不同电流时使用HSPICE软件对反馈参考电压,PWM锁存器输出波形的仿真结果.     

电解防污用开关恒流源初探

对新研制的两种电解防污开关恒流源所采用的不同逆变器、开关功率管、直流工作电源及取样方式的工作状态、工作特性进行了分析比较。在研制过程中，重点解决了恒流电源工作的安全可靠性、稳定性、抗干扰能力及输出范围宽等问题。     

无源软开关电路拓扑的研究

提出一个研究无源软开关电路的新技术方法;其特征是对基本的单管隔离型PWM DC/DC变换器进行类比分析,由此直接导出可行的缓冲能量再生复位电路.该新方法能使DC/DC PWM硬开关变换器转变为软开关变换器.以新型Boost无源软开关变换器为例,进行了电路理论分析与中功率样机的实验测试;结果表明此新变换器具有较宽的软开关工作范围、较低的电应力、较小的缓冲元件量值等特点.由此认为,这种研究方法推导简单、物理意义清晰,还能深入地研究无源软开关的新电路拓扑.     

浅议轨道交通直流牵引供电系统的构成及保护配置

介绍了城市轨道交通直流牵引供电系统的构成,详细叙述了直流牵引供电系统的主要电气设备及其连接方法,以及系统的运行方式.另外,还简单介绍了系统配置的直流保护以及保护原理和保护作用.     

双接触器型三相异步电动机Y-△降压启动电路

提出并试验了一种使用2个接触器的三相异步电动机Y-△降压启动电路,该Y-△降压启动电路比传统电路节省1个接触器。试验结果表明其可以应用于老设备维修改造和新设备设计中。