基于时频域交替法的迟滞非线性振动系统的稳态响应分析

连接界面的黏滑、摩擦行为不仅是引起结构刚度和阻尼非线性的主要原因,而且是结构无源阻尼的主要来源.Iwan模型能够较好地复现连接界面的黏滑、摩擦行为.本文采用时频域交替法(Alternating Frequency/Time Domain Method,AFT)研究含Iwan非线性模型的单自由度振子系统的稳态响应.时频域交替法具有频域法求解线性系统响应的高效性和时域法判断非线性力的便捷性特点,采用离散傅里叶变换和傅里叶逆变换,在频域和时域内分别求解系统响应和对应的非线性恢复力,再反复迭代计算系统的稳态响应.将时频域交替法计算结果和中心差分法计算的结果进行对比,并研究激励幅值对系统非线性特征的影响.结果表明,时频域交替法计算的结果与中心差分计算的结果具有较好的一致性,且求解效率较高,计算耗时减少50%;随着激励幅值的增加,系统的能量耗散增加,刚度降低,固有频率降低.     

受控旋转弹飞行动力学建模和稳定性分析

选取带有控制系统的旋转弹为研究对象,考虑到控制环节不可避免的时滞及气动非线性效应,从理论上进一步完善了旋转弹动力学模型.从模型的特征方程出发,以时滞、控制增益为分岔参数,对系统的零平衡点稳定性进行了分析,得到平衡点失稳后发生Hopf分岔的临界参数值,并在理论预测的情况下数值模拟了攻角和侧滑角在不同情况下的失稳情况以及Hopf分岔周期解振幅随分岔参数的变化情况.数值结果表明了理论预测的正确性,时滞虽未改变旋转弹锥形运动方式,但是却大幅度的减小了稳定飞行控制增益的取值范围,因此在旋转弹姿态稳定性系统设计过程中时滞的影响不可忽略.     

时滞反馈作用下压电梁的参数共振分析

基于Hamilton原理建立了受控压电梁的参数振动方程,研究了轴向激励压电梁时滞速度反馈控制的主参数共振.采用非线性振动的多尺度法研究了压电梁的亚谐波主参数共振,并对其稳定域进行分析.通过算例分析得到了不同时滞,控制增益,轴力影响下压电梁参数共振的稳定域和时程曲线.结果表明:时滞值增大,系统承受轴向力减小,相对于控制增益则反之.同时,随着轴向力增大,在一定范围内主动阻尼增加,时滞反馈能有效降低响应幅值.随着时滞值增大,减振效果变差.     

基于细菌觅食算法的多线圈电- 机械转换器双模控制技术研究

针对提升电-机械转换器快速响应特性的技术需求,提出了新型三线圈结构电-机械转换器。通过建立的电-机械转换器数学模型,提出采用细菌觅食算法来寻找时间最优解,并基于此方法设计了砰-砰与比例-积分双模控制器。分析与仿真结果表明,相对于传统单线圈电-机械转换器,采用双模控制器的三线圈电-机械转换器,其响应时间从8.5 ms缩短至2.5 ms,震荡和超调不超过5%,可知该技术能够实现响应特性,前景良好。     

空间欠采样太赫兹时域光谱成像方法

文章针对传统太赫兹时域光谱成像技术存在的扫描时间长以及数据存储量大等问题,提出了一种基于压缩感知理论的空间欠采样太赫兹时域光谱成像方法。首先通过扫描电机获得目标非等间隔欠采样信号,然后利用压缩感知方法来重构缺失像素点的太赫兹信息。实验结果显示,当压缩比为0.5时,所重构的太赫兹信号与全采样条件下的信号相关性可达99.95%。通过对压缩重建图像的显示分析,时域图像中的缓变区域和频谱成像中的低频信号恢复效果较好。该方法为快速太赫兹光谱成像提供了一种有效的技术手段。     

A Hybrid Estimation of Distribution Algorithm for Unrelated Parallel Machine Scheduling with Sequence-Dependent Setup Times

A hybrid estimation of distribution algorithm (EDA) with iterated greedy (IG) search (EDA-IG) is proposed for solving the unrelated parallel machine scheduling problem with sequence-dependent setup times (UPMSP-SDST). For makespan criterion, some properties about neighborhood search operators to avoid invalid search are derived. A probability model based on neighbor relations of jobs is built in the EDA-based exploration phase to generate new solutions by sampling the promising search region. Two types of deconstruction and reconstruction as well as an IG search are designed in the IG-based exploitation phase. Computational complexity of the algorithm is analyzed, and the effect of parameters is investigated by using the Taguchi method of design-of-experiment. Numerical tests on 1640 benchmark instances are carried out. The results and comparisons demonstrate the effectiveness of the EDA-IG. Especially, the bestknown solutions of 531 instances are updated. In addition, the effectiveness of the properties is also demonstrated by numerical comparisons.      

Performance comparison of reduced models for leak detection in water distribution networks

This paper presents a methodology for comparing the performance of model-reduction strategies to be used with a diagnostic methodology for leak detection in water distribution networks. The goal is to find reduction strategies that are suitable for error-domain model falsification, a model based data interpretation methodology. Twelve reduction strategies are derived from five strategy categories. Categories differ according to the manner in which nodes are selected for deletion. A node is selected for deletion according to: (1) the diameter of the pipes; (2) the number of pipes linked to a node; (3) the angle of the pipes in the case of two-pipe nodes; (4) the distribution of the water demand; and, (5) a pair-wise combination of some categories.The methodology is illustrated using part of a real network. Performance is evaluated first by judging the equivalency of the reduced network with the initial network (before the application of any reduction procedure) and secondly, by assessing the compatibility with the diagnostic methodology. The results show that for each reduction strategy the equivalency of networks is verified. Computational time can be reduced to less than 20% of the non-reduced network in the best case. Results of diagnostic performance show that the performance decreases when using reduced networks. The reduction strategy with the best diagnostic performance is that based on the angle of two-pipe nodes, with an angle threshold of 165°. In addition, the sensitivity of the performance of the reduced networks to variation in leak intensity is evaluated. Results show that the reduction strategies where the number of nodes is significantly reduced are the most sensitive.Finally this paper describes a Pareto analysis that is used to select the reduction strategy that is a good compromise between reduction of computational time and performance of the diagnosis. In this context, the extension strategy is the most attractive.     

ANN‐based modeling of compact impedance‐varying transmission lines with applications to ultra‐wideband Wilkinson power dividers

The modeling of the physical and electrical characteristics of microstrip non‐uniform transmission lines (NTLs) utilizing artificial neural networks (ANNs) is investigated. The fundamental equations and constraints for designing variable impedance transmission lines are first presented. Then, a proof‐of‐concept example of a compact non‐uniform matching transformer and the counterpart modeled version is elaborated for source and load impedances Z_s and Z_l, respectively, at 0.5 GHz. For comparison purposes, weights and biases of the proposed ANN are established with three different training techniques; namely: backpropagation (BP), Quasi‐Newton (QN), and conjugate gradient (CG); at which the ABCD matrix, impedance variations, input port matching (S₁₁), and transmission parameter (S₂₁) are set as benchmarks to examine the validity of the trained model. The concept is then extended to model a NTL ultrawideband (UWB) Wilkinson power divider (WPD) with three resistors for improved isolation. S‐parameters derived from the trained ANN outputs are close to those obtained by the traditional time‐consuming optimization procedure, and show input and output ports matching and isolation of below ?10 dB, and acceptable values of transmission parameters over the 3.1 GHz to 10.6 GHz band. The resulting models outperform traditional optimizations in terms of simulation time and reserved resources with comparable accuracy. © 2015 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:563–572, 2015.     

Short‐Time Linear Quadratic Form Technique for Estimating Fast‐Varying Parameters in Feedback Loops

The precision of a closed‐loop controller system designed for an uncertain plant depends strongly upon the maximum extent to which it is possible to track the trend of time‐varying parameters of the plant. The aim of this study is to describe a new parameter estimation algorithm that is able to follow fast‐varying parameters in closed‐loop systems. The short‐time linear quadratic form (STLQF) estimation algorithm introduced in this paper is a technique for tracking time‐varying parameters based on short‐time analysis of the regressing variables in order to minimize locally a linear quadratic form cost function. The established cost function produces a linear combination of errors with several delays. To meet this objective, mathematical development of the STLQF estimation algorithm is described. To implement the STLQF algorithm, the algorithm is applied to a planar mobile robot with fast‐varying parameters of inertia and viscous and coulomb frictions. Next, performance of the proposed algorithm is assessed against noise effects and variation in the type of parameters.     

Chaotification of Switching Control Systems via Dwell Time Approach

In this paper, a class of switching control systems is investigated, and a novel switching control method is developed, which can be applied to generating chaos dynamics from switching control systems through dwell time restriction. A numerical example is given to illustrate the generated chaotic dynamic behavior of the systems, and the corresponding bifurcation diagram is sketched. Then, the validity of the main results is verified together with other phase portraits.