关于海峡两岸的电子玻纤概况

我国玻纤行业2004年生产总量已经突破60万t大关,其中池窑拉丝产量达到40多万t.这意味着我们玻纤行业又迈上了一个新台阶.我们已经成为世界玻纤第2生产大国并正向着技术强国进军,本文介绍了电子玻纤生产工艺特性;电子玻纤市场现状及其发展前景;海峡两岸电子玻纤生产现状及其发展趋势,希望能使大家对电子玻纤有个更全面的认识.     

谈化学新教材的实验设计

在高中化学教学中,用好经典装置的同时,应鼓励学生设计出比“经典装置”更好的新装置,这样不仅培养了学生的环保意识而且还发挥了化学实验在培养学生创新能力上的独特优势。     

Synthesis and characterization of aromatic polyisoimides derived from PMDA and para-diamines. An approach to in situ generated rigid-rod molecular composites

A new concept for the processing and fabrication of rigid-rod molecular composites aiming at the elimination or minimization of phase separation is proposed. This approach calls for a coil-like aromatic polyisoimide which is soluble and compatible with an amorphous matrix polymer or thermosettable oligomer and can undergo facile transformation to the corresponding rigid-rod polyimide in solid composite state, thus imparting the inherently high strength/high modulus properties to the final form. To this end, various synthetic routes were explored to obtain para-diamines which could afford high molecular weight and aprotic-solvent-soluble polyisoimides upon polymerization with pyromellitic dianhydride (PMDA). Four such polyisoimides were prepared, with their inherent viscosities ranging from 0.25 to 1.89 dl g⁻¹ in dimethylacetamide at 30°C. Facile thermally induced isoimide-imide conversion was demonstrated by solid-state (film) Fourier transform infrared spectroscopy. A preliminary evaluation of the compatibility of the polyisoimide/matrix resin was made. In one instance, a film prepared from the polyisoimide derived from PMDA and 3,3′,5,5′-tetramethylbenzidine (TMB) showed no visually detectable phase separation.     

陶瓷膜微滤技术在栀子浸提工艺中的应用

为了去除栀子浸提液中的细微颗粒、悬浮杂质、难溶性大分子蛋白质、果胶、多糖或由栀子果实内所含成分相互作用而形成的大分子配合物等杂质,采用陶瓷膜微滤技术对栀子浸提液进行澄清。将栀子浸提液微滤前后进行对比分析,结果表明,以0.2μm膜的工作效率高,并在滤液重为原料液重的60%~70%时,加入30%原料重的纯水透析两次较好。     

早期CT环池形态变化与急性颅脑损伤病人预后关系的研究

目的前瞻性研究急性颅脑损伤患者早期CT扫描征象的环池形态和中脑变形程度与病人预后的关系,以指导临床的治疗。方法对132例病人早期CT扫描,在中脑水平准确测量环池宽度,分6个组记录数据。同时观测中脑有无变形及测量其前后径与横径之比。治疗后按GOS标准,随访3个月,评定疗效。结果通过比较,环池宽度>1mm者有较佳的预后;中脑无变形及前后径与横径之比为0.9∶1.1者的预后较佳。结论研究得出,环池形态、中脑受压变形能作为急性颅脑损伤患者预后判断的指标,并为临床医师治疗方案提供重要依据。     

油封唇口压力大小及分布的有限元分析

利用ANSYS建立了橡胶油封的2维轴对称模型,分析了过盈量、唇口接触宽度R,弹簧劲度以及后唇角β与油封唇口压力大小及分布的关系。分析结果验证了前人在油封设计及应用选型方面经验的正确性。该分析方法在油封设计及选型方面将起到一定的指导意义。这些分析为油封的构型优化奠定了基础。     

Ozone Contactor Hydrodynamics

Tracer tests were conducted at the 6,000 pounds of ozone per day Tucson, CAP Water Treatment Plant in Tucson, Arizona. The tests were designed to determine T₁₀ values through the contactors at various operating conditions. The tests were modeled using three techniques. Peclet Number was calculated for each of the runs, which would indicate the hydrodynamic conditions inside the ozone contactor. The results indicated that the increase in water flow rate and the number of cells with gas flow increased Peclet Number. The flow rate of liquid seemed to impact the Peclet Number more than gas flow. The headloss in each cell appeared to be important in controlling the distribution of liquid and gas through the cell. A correlation was developed between the product of gas and liquid phase Reynolds Number and Peclet Number.     

氮化制度对Si-Al-Al2O3体系合成Sialon的影响

以SiC、α-Al2O3微粉、Si粉、Al粉为原料,在1450℃流动氮气中制备Sialon/SiC材料。研究了不同温度保温氮化对Sialon合成的影响。研究结果表明:有部分硅粉残余没有氮化;在1100℃保温氮化的氮化率高于在1150℃、1200℃保温氮化;1100℃保温氮化,残余Si量少、分布均匀,残余硅熔聚现象较轻,利于Sialon的合成。     

我国电机保护现状与发展趋势

电动机的保护在企业生产中是非常重要的一项内容，其保护方式及过程有一定的规范要求，其发展趋势要遵循可靠、稳定的原则。