The prediction of transport parameters in filamentous fermentation broths based on results obtained in pseudoplastic polymer solutions

Transport phenomena studies on single phase “model” fluids are of limited value in biochemical engineering if they cannot be translated to the heterogeneous systems encountered in real fermentation processes. In this paper we discuss the utility of polymer solutions as models of filamentous fermentation broths for evaluation of: pipeline friction factors and impeller power numbers (turbine and helical ribbon). To a first approximation, polymer solutions can serve as suitable models for the prediction of laminar flow pressure drop in pipelines and turbulent power consumption in stirred tanks. However, results obtained on polymer solutions do not directly apply to filamentous fermentation broths for predictions of laminar flow impeller power consumption and the transition point for turbulent flow in stirred tanks. These discrepancies are believed to result from the existence of a time dependent yield stress in filamentous fermentation broths.     

Task-driven learning: The antecedents and outcomes of internal and external knowledge sourcing

The degree to which individuals leverage knowledge resources influences their effectiveness and may shape their organizations’ competitive advantage. We examine the ways in which tasks with different characteristics affect individuals’ use of internal and external knowledge and the outcomes of such behaviors. Our analysis reveals that interdependent and non-routine tasks drive internal knowledge sourcing, while complex tasks motivate external knowledge sourcing. Internal and external knowledge sourcing activities contribute to individuals’ cognitive adaptation and innovation, with a negative interaction between them, while cognitive replication benefits only from internal knowledge sourcing. These findings can help managers better satisfy individuals’ knowledge needs and achieve intended organizational outcomes.     

湿式氨法脱硫工艺及应用

随着二氧化硫对环境的污染越来越严重,国家环保总局对烟气二氧化硫排放控制严格,烟气脱硫显得日益重要。简单介绍了湿式氨法烟气脱硫技术的工艺流程及实际应用情况。湿式氨法脱硫工艺具有原料易得、脱硫塔不易结垢、不产生废水、副产品硫酸铵可作为农用肥料,减少了对环境的二次污染等特点,是较适合我国国情的烟气脱硫技术。     

Energy Efficiency of an Indirect Thermally Coupled Distillation Sequence

Several thermally coupled distillation sequences have been proposed to improve the thermal inefficiency of conventional distillation sequences. Particularly, for the separation of ternary mixtures, structures that perform a lateral extraction in one of the columns of the integrated arrangement have been shown to provide significant energy savings. The structure of existing sequences, based on conventional distillation columns, might provide the basis for alternate thermally coupled designs. In this paper, it is shown how a thermally coupled system derived from an indirect conventional sequence can provide energy savings through a proper optimization of the interconnecting streams.     

铁电薄膜存储器底电极Pt/Ti的制备及性能研究

应用射频磁控溅射方法 ,在Si基片上采用不同的溅射工艺制备了铁电薄膜底电极Pt/Ti,并分析了在不同温度下退火后材料的电导率性能和粘结力性能 ,从理论和实验上分析了不同的溅射工艺和退火处理对底电极性能的影响。     

Pressure drop for single and two‐phase flow of non‐newtonian liquids in helical coils

New experimental results on pressure loss for the single and two‐phase gas‐liquid flow with non‐Newtonian liquids in helical coils are reported. For a constant value of the curvature ratio, the value of the helix angle of the coils is varied from 2.56° to 9.37°. For single phase flow, the effect of helix angle on pressure loss is found to be negligible in laminar flow regime but pressure loss increases with the increasing value of helix angle in turbulent flow conditions. On the other hand, for the two‐phase flow, the well‐known Lockhart‐Martinelli method correlates the present results for all values of helix angle (2.56‐9.37°) satisfactorily under turbulent/laminar and turbulent/turbulent conditions over the following ranges of variables as: 0.57 ≤ n′ ≤ 1; Re′ < 4000; Re_l < 4000; Re_g < 8000; 8 ≤ x ≤ 1000 and 0.2 ≤ De′ ≤ 1000.     

折流杆换热器CAD系统的开发

本文阐述了折流杆换热器CAD系统的开发方法，包括：把大量线图、数表进行数据程序化，利用ADSRX技术、PDB界面设计技术和参数化图形设计技术对折流杆换热器的一百多种类型、三万多种规格的零部件进行了设计，将数据信息采用数据文件和数据库的方式进行了集成和管理，从而实现折流杆换热器工艺、机械、零部件子系统的集成。     

基于DPSIR和主成分分析的阜康市水资源承载力评价

针对新疆自治区阜康市水资源日益短缺及生态环境逐渐恶化的现实情况,根据DPSIR框架展开水资源承载力因子分析,构建了水资源承载力多因素基础指标体系;应用主成分分析法筛选出主要指标,采用熵权法进行赋权;构建综合评价模型对水资源承载力进行计算。研究表明:筛选出的4个主成分累计贡献率为92.016%,能充分代表多因素基础指标体系;阜康市九年间(2006年-2014年)水资源承载力综合评分值在0.498~0.531之间波动,下降速率缓慢且波动幅度减小,整体上处于开发饱和阶段。社会和经济发展的压力带来的农业用水的增加是导致水资源承载力下降的主要指标,扩大地下水开采和推行的节水灌溉等压采措施则在很大程度上缓解了下降的趋势。     

华北平原地下水资源承载力评价

华北平原地下水严重超采,并带来一系列资源环境问题,地下水资源承载力的可持续性面临严重挑战。本研究定义了地下水资源承载力的概念,提出了一种定量评价地下水承载力的新方法,并对华北平原地下水承载力进行了评价。结果表明,华北平原地区地下水资源支撑的GDP从2003年的15 608.18亿元迅速提高到2011年的37 584.9亿元,33.3%的地市位于未超采未超载区;华北平原整体及57.2%的地市均位于超采未超载区,已发生地下水超采,但通过提高用水效率,未来社会经济规模仍有发展空间;9.5%的地市位于超采超载区。最后探讨地下水资源的承载力的提高途径,主要包括增加地下水资源可利用量和提高用水效率两方面,其中提高用水效率效果更显著。     

消能锥形阀过流状态研究与优化

消能锥形阀是一种用于中、高水头下的消能控流阀门,其内部结构设计的好坏直接影响着控流效果。为探究消能锥形阀在不同开度下,过流流量及内部流场的变化情况。进行了模型试验与CFD数值模拟计算,试验中发现开度从100%关至85%时出现了流量反而上升、进口压力下降的情况。利用CFD数值模拟的方法对内部流场进行了可视化研究。研究结果表明,在全开状态下锥形阀内部存在以下问题:过强的局部高速高压区域、低速流动死区范围过大、涡流区过度影响高速过流部分。并对锥形阀进行了一定的结构改进,优化了其内部流场情况。