降低全低变工艺阻力的措施

将变换流程改为全低变工艺后,吨氨蒸汽消耗明显下降,但触媒床层阻力迅速上升.通过采取增设焦炭过滤器、更换触媒、改进蒸汽分布器等一系列措施,不仅保证了正常的生产指标,而且还使变换炉的阻力有了明显下降,取得了满意的效果.     

乌达矿区煤中黄铁矿的赋存特点及其可选性评价

对乌达矿区高硫煤（９煤层和１０煤层）中硫的主要赋存形式－黄铁矿进行了研究，从宏观和微观两方面分析了黄铁矿的形态、嵌布类型及粒度特征，最后提出了降脱煤中黄铁矿的技术途径，对其可选性进行了评价。     

新一代喷涂聚脲路面标线涂料

简述了国内路标漆的发展概况,介绍了聚天冬氨酸酯聚脲路标漆的原理、配方及应用性能。针对目前国内各种路标漆的优缺点,将聚天冬氨酸酯聚脲路标漆与它们进行比较,发现聚天冬氨酸酯聚脲路标漆具有快干、耐磨、反光效果好、施工速度快、重涂性好等优点,特别适用于路面标线涂料的应用。     

单组分聚氨酯乳液制备及其结构与性能研究

采用预聚合法,以聚酯二元醇(PEA)、甲苯二异氰酸酯(TDI)、二羟甲基丙酸(DMPA)为基本原料合成了分子链上带有亲水基团(-COOH)的聚氯酯预聚体。以特殊的水化方式制得聚酯型水性聚氨酯乳液。讨论了温度、-NCO-与-OH的物质的量之比(R)、亲水基团含量、合成工艺分别对材料力学性能、耐水性、玻璃化转变温度(Tg)等的影响。研究发现,采用前中和工艺、在高速搅拦下将预聚物加入到水中的水化方式,当R值为1．2,羧基含量为1．6％时,合成的聚酯型水性聚氨酯乳液具有较好的贮存稳定性,且涂膜的耐水性和力学性能良好。     

Coupling granule properties and granulation rates in high-shear granulation

It is possible to link granulation rates to granule properties. The linkage is by multiple dimension population balance equations that, by means of simplifying assumptions, can be reduced to multiple one-dimensional (1-D) population balance equations (PBEs). Using simple physically based models, this paper demonstrates how multiple one-dimensional population balance equations can describe the results of high-shear granulation experiments of two different materials, calcium carbonate and lactose. Good agreement between experimental and simulated results was achieved enabling the granulation rates to be defined by two model parameters: the critical binder volume fraction and the aggregation rate constant. The modelling framework presented in this paper also provides a basis for the kinetic analysis of granulation experiments so that with further work, it is possible to determine the effect of process conditions and material properties on the model parameters.     

基于词向量与TextRank的关键词提取方法

针对词汇语义的差异性对TextRank算法的影响进行了研究,提出一种基于词向量与TextRank的关键词抽取方法。利用FastText将文档集进行词向量表征,基于隐含主题分布思想和利用词汇间语义性的差异,构建TextRank的转移概率矩阵,最后进行词图的迭代计算和关键词抽取。实验结果表明,该方法的抽取效果相比于传统方法有明显提升,同时证明利用词向量能简单而有效地改善TextRank算法的性能。     

EFFECT OF NONSOLVENT ADDITIVES ON THE PORE SIZE AND THE PORE SIZE DISTRIBUTION OF AROMATIC POLYAMIDE RO MEMBRANES

In this paper discussions are made on the effect of nonsolvent swelling agents on the average pore size and pore size distributions at the surface of polyamide membranes which result from casting solutions involving above nonsolvent swelling agents.

The size of the polymer aggregate in the film casting solution and the size of polymer network pores are correlated to physicochemical data of ions which constitute the electrolytes used as nonsolvent swelling agents. As such ionic properties the charge density and the free energy of transition of ions from polyamide phase to water phase were considered. The validity of the correlation is limited in a range of casting solution composition where the polymer concentration in the casting solution is close to the limiting concentration of polymer at the phase boundary and the molar ratio of the nonsolvent swelling agent to the amide group involved in the polyamide polymer is equal to or slightly more than 0.7.     

一种结合主题模型的推荐算法

针对传统协同过滤推荐算法存在的冷启动、数据稀疏以及相似度度量的准确性问题,基于LDA主题模型对文本隐式主题挖掘的有效性和KL散度在主题分布相似性度量的准确性,提出了结合LDA主题模型的矩阵分解推荐算法。首先,利用改进的LDA算法输出项目-主题分布,并用困惑度作为主题数设置的修正函数;然后分别基于余弦相似度和KL散度计算得到项目相似度矩阵,将得到的相似度矩阵结合原评分训练集输出预评分,再将预评分填充到训练集;最后将训练集输入ALS矩阵分解算法得到推荐结果。通过MovieLens数据集的实验结果表明,该算法在不同隐式参数设定下均能得到比ALS推荐算法以及更小的预测误差,并且最优预测误差小于传统推荐算法。该实验说明了通过集成LDA主题模型的ALS算法效果要优于其他推荐算法。     

Mode I Fracture Resistance of a Laminated Fiber-Reinforced Ceramic

The mode I fracture resistance of a ceramic matrix composite has been measured. Simultaneous observations have revealed that the resistance is dominated by frictional dissipation upon the pullout of fibers that fracture in the crack wake off the crack plane. Numerical and analytical crack growth simulations have been compared with the experimental results. One important feature in this comparison concerns the occurrence of large-scale bridging. With these effects taken into account, the simulations and the experiments are found to be in good correspondence for acceptable magnitudes of the interface sliding stress.     

Nickel foam and carbon felt applications for sodium polysulfide/bromine redox flow battery electrodes

The first use of nickel foam (NF) as electrocatalytic negative electrode in a polysulfide/bromine battery (PSB) is described. The performance of a PSB employing NF and polyacrylonitrile (PAN)-based carbon felt (CF) as negative and positive electrode materials, respectively, was evaluated by constant current charge-discharge tests in a single cell. Charge/discharge curves of the cell, positive and negative electrodes show that the rapid fall in cell voltage is due to the drop of positive potential caused by depletion of Br₂ dissolved in the catholyte at the end of discharge. Cell voltage efficiency was limited by the relatively high internal ohmic resistance drop (iR drop). Polarization curves indicated that both NF and CF have excellent catalytic activity for the positive and negative redox reactions of PSB. The average energy efficiency of the single cell designed in this work could be as high as 77.2% at 40 mA cm⁻² during 48 charge-discharge cycles.