漳泽水库最优兴利调度研究

漳泽水库供水能力下降。优化调度方式是提高水库效益的最有效途径。通过采用随机动态规划方法与模拟模型交互运算得到现行控制水位的水库优化调度图。采用同样方法对不同控制水位的水库运行方式进行优化调度，选出的规划水库最优控制水位为汛限水位９０４ ．５ ｍ ，正常高水位９０５ ．５ ｍ 。优化的控制水位方案在保障水库防洪安全的前提下可供给城市生活和工业用水６ ３００ 万ｍ３ ，较现行控制水位下的供水量提高１ ２５５ 万ｍ３ 。但农业用水仍然不足，应采取一定措施给予解决，如对灌区工程进行改造，因地制宜采取不同节水措施和污水回用等。     

喷丸对连杆疲劳强度的影响

本文阐述了喷丸强化提高连杆表面质量和疲劳寿命。经喷丸处理,其试片弧高度迟到0.7mm时,疲劳极限提高了19%,达到440MPa,连杆实物疲劳强度试验结果表明,喷丸复盖率影响强化效果,文中还叙述了喷丸强化层应力分布的X射线应力测定工作。     

用于氢化的铜铬氧化物催化剂的研究

通过铜铬氧化物催化剂用于豆油的选择氢化,研究了制备方法及氢化条件对催化剂活性的影响.在所用的五种催化剂中,以Adkins法制备的催化剂活性最好,碳酸氢铵法次之.文中还对催化剂焙烧气氛、焙烧温度、焙烧时间、铜铬原子比对催化剂活性的影响以及氢化温度、催化剂用量、搅拌速度、氢流速等对反应的影响进行了较详细的讨论.     

转炉冶炼20管坯钢生产实践

介绍了20#管坯钢的生产试验工艺，采取了拉碳法脱碳、钢包底吹氩及喂丝、保护浇铸、合理控制拉速等有效措施，解决了生产中存在的质量问题，为下一步的生产提供了理论和实践依据。     

SCLC法测量非晶硅有效隙态密度

提出了用空间电荷限制电流（SCLC）法测量非晶硅材料的有效隙态密度的新方法，并且报告了用4061A型半导体综合测试仪测量有效隙态密度的结果。测量结果发现与用低频电容法所得结果相符。     

An object design framework for structural engineering

Object-oriented principles have introduced several useful concepts for developing complex software systems. As a result, several methodologies have been suggested for the overall design of software systems based on these concepts. Methodologies and frameworks for designing objects that are to be part of the software systems are currently lacking. This paper proposes anobject design framework andmethodology, which utilizes the object-oriented concepts, for planning, organizing and designing structural engineering design objects. Design objects in an integrated structural engineering system are complex and often related to each other in various different ways. The paper also identifies several important relationships among structural engineering design objects. These relationships serve as communication channels through wich design objects send messages to and receive responses from each other. Several examples, drawn from reinforced concrete structures, will be presented to demonstrate the object design methodology and to illustrate how the framework is effective in reducing the complexity of design objects in an integrated structural engineering system.     

PDC钻头钻进条件下录井方法探讨

PDC钻头钻井在给油田带来高速钻、高效益、较高井身质量的同时，由于其特殊的钻头结构、岩石破碎机理，导致岩屑细碎呈粉末状从而给岩屑采集、显示识别、岩石定名带来很大困难，也就产生了一个行业性的难题-PDC钻头钻进条件下的录井方法。立足现有工艺技术水平，从岩屑采集、岩性识别、污染排除、油气显示失真等方面对比进行探讨。     

井-地电位成像技术研究剩余油分布

井—地电位测量是在地表向注水井中套管施加一个大电流，通过测量地表加注高矿化度的导电流体前后的电位分布，经数据处理及反演计算，求出注水各小层的电阻率分布，进而计算出各小层的剩余油饱和度分布状况，指出油藏的挖潜方向。从临17—22井区应用情况来看，与生产动态符合较好。     

用MONTECARLO方法研究分光光度法在比色分析中的精度

对使用分光光度法进行比色分析时的误差特性及工作曲线的计算做了讨论，给出了在测试数据不等时的拟合工作曲线的最小二乘算法，并使用ＭｏｎｔｅＣａｒｌｏ方法定量地分析了测试精度与试验条件间的具体关系。     

Thermodynamics-inspired inverse halftoning viamultiple halftone images

Based on an analogy between thermodynamics and Bayesian inference,inverse halftoning was formulated using multiple halftone images based on Bayesian inference using the maximizer of the posterior marginal(MPM) estimate.Applying Monte Carlo simulation to a set of snapshots of the Q-Ising model,it was demonstrated that optimal performance is achieved around the Bayes-optimal condition within statistical uncertainty and that the performance of the Bayes-optimal solution is superior to that of the maximum-a-posteriori(MAP) estimation which is a deterministic limit of the MPM estimate.These properties were qualitatively confirmed by the mean-field theory using an infinite-range model established in statistical mechanics.Additionally,a practical and useful method was constructed using the statistical mechanical iterative method via the Bethe approximation.Numerical simulations for a 256-grayscale standard image show that Bethe approximation works as good as the MPM estimation if the parameters are set appropriately.