Machining with tool–chip contact on the tool secondary rake face—Part II: analysis and discussion

The forces, chip thickness, and natural tool–chip contact length in machining with a double-rake-angled tool are predicted in Part II of the present study. It is revealed that in comparison with a single-rake-angled tool, a double-rake-angled tool increases the forces, especially the thrust force. However, the increase in chip thickness and tool–chip contact length is not significant under the input conditions specified in the present study. The effect of seven input variables of the proposed model is quantitatively investigated. The predicted variations of forces, chip thickness, and natural tool–chip contact length are in good agreement with theoretical and experimental results obtained by other researchers. The interrelationships among the resultant force, the chip thickness, and the natural tool–chip contact length are established, which provides a new and promising method to estimate the tool–chip contact length by employing the resultant force. It is demonstrated that the model can also be extended to study the problem of machining with a groove-type chip breaker tool.     

阳离子型聚丙烯酰胺絮凝剂的开发与应用

阳离子型聚丙烯酰胺具有许多优点，极具开发研究价值，是重要的高分子絮凝剂。介绍了阳离子型聚丙烯酰胺絮凝剂的制备方法，应用及其絮凝作用机理，并分析了其发展方向。     

多功能DBHTV传输短节的设计与开发

简要介绍了多功能井下超声成像测井仪的总体构思，然后较详细地阐述了其中的一个关键部分-传输短节的设计与开发过程。在短节中应用了单片机系统和FPGA技术，实现了一种包括大数据量井下超声成像测井仪在组合测井新方法，为今后井下超声成像测井仪的发展拓宽了道路。     

石英玻璃基复合材料的研究进展

石英玻璃基复合材料属于重要国防材料，在导弹通讯、制导和防热上具有不可取代的地位。本工作介绍了几种形式的石英玻璃基复合材料的组织结构、性能和制备工艺的研究与应用情况。同时提出了石英玻璃基复合材料研究中存在的问题。     

微控制器与嵌入式RISC处理器的发展现状

综述了新一代微控制器与嵌入式RISC处理器的主要特点和发展方向；详细介绍了目前国内外最流行的不同字长的系列机种、结构特点、专有特性及系统应用等；最后预测了它们的世界销售市场与国内发展前景。     

胶体五氧化二锑研究现状及发展方向

对胶体五乳化二锑的研究现状进行了回顾，详细概述了胶体五乳化二锑的各种制备方法及其特点和适用范围，讨论了两种成胶理论。针对目前存在的问题，对胶体五乳化二锑的研究方向及研究重点提出了几点建议。     

PIC单片机在激光电源中的应用研究

论述了单片机控制激光电源的原理，提出了产生PWM控制的基本思想及整个控制系统的硬件组成和软件设计方法。     

Z900MCM综述

介绍了Z900 MCM设计和布局,可控塌陷芯片连接(C4)工艺在Z900 MCM组装中的应用。从设计上通过加入垂直电感器及去耦电容器减小其噪声。通过基板测试和功能测试,剔除有缺陷的基板和芯片。Z900 MCM采用先进的MCM—D技术和MCM返工及冷却技术。Z900 MCM平均无故障时间高达40年。     

A One‐Kilobit PQR‐CMOS Smart Pixel Array

The photonic quantum ring (PQR) laser is a three dimensional whispering gallery (WG) mode laser and has anomalous quantum wire properties, such as microampere to nanoampere range threshold currents and √T‐dependent thermal red shifts. We observed uniform bottom emissions from a 1‐kb smart pixel chip of a 32×32 InGaAs PQR laser array flip‐chip bonded to a 0.35 µm CMOS‐based PQR laser driver. The PQR‐CMOS smart pixel array, now operating at 30 MHz, will be improved to the GHz frequency range through device and circuit optimization.     

ISD2500与ATmega8单片机配合使用的智能语音系统设计

提出了一种利用ATmega8单片机对ISD2500系列语音芯片进行控制的智能语音系统,此系统使用灵活,易于功能升级,具有良好的应用前景.提供了硬件连接电路和关键源程序.