毛细管动态挤出下聚合物熔体非线性流变行为的研究

采用毛细管动态流变仪,选用PELD、PP、PS和PA等典型物料,研究了毛细管动态挤出下各聚合物熔体的非线性流变行为。结果表明,不同物料的流变行为对振动力场的响应特性有较大差异,只有在一定的振幅和频率下振动力场才能有效降低熔体的黏度。实验首次发现,PP、PS和PA存在窄的振动参数区域,在此区域内,熔体的动态表观黏度值大于相应的稳态值,出现“加振变黏”现象。这一新的发现表明,并非“只要引入振动就一定有利于聚合物材料的成型加工”,必须考虑不同分子结构的聚合物材料对振动的不同响应规律。     

Margarines: A rheological study

Time-dependent flow properties of both commercial and pilot plant-made margarines were characterized under steady shear. Flow curves were fitted to the kinetic expression τ = τ _i +a e ^−k1t +b e ^−k2t . A first-order kinetic model did not describe the observed destruction process of the margarine structure in an adequate manner. In the proposed model, two structures with different destruction rates are postulated. Each structure contributes to a part of the shear stress necessary to deform the margarine sample. The parameters τ _i a andb are temperature-dependent. Decreasing temperatures produce an exponential increase of τ _i , a linear increase ofb and an increase ofa up to a point beyond which it remains constant. A physical interpretation of the model is proposed. The role of the aqueous phase was also studied. Greater hardness was detected at higher water content. Parameter τ _i increased, at any selected temperature, with increasing aqueous phase content of the sample. Parametera increased with decreasing temperatures and higher water content. On the other hand, parameterb was not affected by the amount of aqueous phase. This kinetic model could be employed to perform studies on the influence of different parameters of margarine formulation on its rheologic behavior.     

氯霉素在聚茜素红薄膜修饰电极上的伏安行为及其测定

研究了聚茜素红薄膜修饰电极(PARE)对氯霉素(Chloramphenicol,CAP)的电催化作用,并应用于对微量CAP的定量检测。实验结果表明:在0.010mol/LHCl+1.0×10-4mol/LCu2++0.10mol/LNaCl测定体系中,CAP的浓度在1.0×10-9mol/L～1.0×10-8mol/L范围内与它的氧化峰电流呈良好的线性关系,线性方程和线性相关系数分别为:ip(μA)=-0.188×10-8CCAP(mol/L)-7.62,γ=0.9997,检出限可达5.0×10-10mol/L。CAP的标准回收率为95.9%~102.9%,八次平行样品测定结果的相对标准偏差3.2%。     

Role of semiochemicals in mate location by parasitic sea louse,Lepeophtheirus salmonis

The role of olfaction and diffusible pheromones in mate location behavior of sea lice, Lepeophtheirus salmonis, was assessed with Y-tube behavioral bioassays. The pheromone emitting animals were located in a chamber in one arm of a Y-tube arena, with artificial seawater flowing through both arms. Adult male sea lice displayed both activation and directional responses to seawater conditioned with preadult II virgin females, but were only activated by mated adult female conditioned water. Further, when males were given the choice of preadult II virgin females or mated adult females, a significant number of males chose the arm with the preadult II virgin females. Adult males showed activation responses when presented with water conditioned with adult males but were not attracted to them. When presented with adult males, preadult II virgin females showed only directional responses, but not activation responses. Preadult II virgin female conditioned water was extracted using solid-phase extraction (SPE) protocols pioneered for semiochemical isolation. Adult male sea lice showed significant directional responses to the preadult II virgin female SPE extract. Distillation under vacuum was performed on the extract to give a distillate comprising components with a molecular weight range and physical properties comparable to those of compounds utilized as volatile semiochemicals by terrestrial organisms and a residue comprising components with higher molecular weight range comparable to those utilized as involatile semiochemicals. Adult males were found to be both significantly activated and attracted to the distillate, but not to the residue. This research provides evidence that small, lipophilic organic molecules are used by sea lice as sex pheromone signals to locate a member of the opposite sex.     

用固体核磁技术分析PE 100管材料的抗熔垂性

用固体核磁技术分析了2种具有不同抗熔垂性能的聚乙烯管材料的凝聚态结构与流变性能。管材树脂的抗熔垂性能与其核磁迟豫特性紧密相关,好的抗熔垂性能对应更长的纵向迟豫时间。抗熔垂性能好的双峰管材料的重均分子量更高,高相对分子质量部分的含量更多。     

Polymorphic behavior of gondoic acid and phase behavior of its binary mixtures with asclepic acid and oleic acid

Molecular properties of polymorphic forms of gondoic acid [cis-C_20:1Δ11ω9 (GOA)] have been studied by X-ray diffraction (XRD), differential scanning calorimetry (DSC), optical microscopy, and Raman scattering, in comparison to those of six principal unsaturated fatty acids: oleic acid [cis-C_18:1Δ9ω9 (OA)], erucic acid [cis-C_22:1Δ13ω9 (ERA)], petroselinic acid [cis-C_18:1Δ6ω12 (PSA)], asclepic acid [cis-C_18:1Δ11ω7 (APA)], palmitoleic acid [cis-C_16:1Δ9ω7 (POA)], and elaidic acid [trans-C_18:1Δ9ω9 (ELA)]. In addition, phase behavior of binary mixtures of GOA and APA and OA was examined by XRD and DSC. The polymorphic structures of GOA are quite similar to those of APA, ERA, POA, and partly to OA. In particular, DSC and Raman scattering studies have shown that gondoic acid exhibits conformational disordering on heating at the ω-chain, a chain segment between the double bond and CH₃ group, as a transition from all-trans (γ form) to gauche-rich (α form) conformations. A miscible mixing phase was observed in the mixture of GOA and APA, yet eutectic phases were observed in the GOA and OA mixtures. This is a remarkable contrast because the binary mixture systems of varying combinations of cis-unsaturated fatty acids examined so far exhibited either eutectic nature or molecular compound formation. It is expected that specific molecular interactions between GOA and APA that originate from the equivalence of the length of the Δ-chain, the chain segment between the cis-double bond and COOH group, and also from the presence of the γ-α order-disorder transformation would be operating to form the miscible mixing phase.     

板柱与梁板结构受力性能对比研究

以某工程为算例,分别选取合理板柱与梁板结构计算模型,按照相关规范进行大型广场在平时工况与战时工况顶板各构件承载力计算,并对其两种结构型式的受力性能分析对比,以总结出地下人防结构顶板的适用原则,为实际工程设计提供参考依据。     

丙烯酸接枝线形低密度聚乙烯的热学行为及结晶形态

利用差示扫描量热仪研究了丙烯酸接枝线形低密度聚乙烯（PE-LLD-g-AA）的热学行为，结果表明，与纯线形低密度聚乙烯（PE—LLD）相比，PE-LLD-g-AA的熔融温度（Tm）略有增加，结晶温度（Tc）增加大约4℃，熔融焓（AHm）随AA含量的增加而降低。还利用差示扫描量热仪研究了PE—LLD和PE—LLD-g—AA的等温结晶动力学，用扫描电子显微镜观察了PE—LLD-g—AA等温结晶形态。结果表明，PE-LLD-g-AA的结晶速率大于纯PE—LLD的，随着接枝率的增加，PE-LLD的球晶半径减小，接枝到PE—LLD分子链上的AA分子起到了成核剂的作用。     

CPE/P(AA-AM-HMA)吸水膨胀弹性体的研究

采用机械共混将氯化聚乙烯(CPE)与自制的吸水树脂丙烯酸-丙烯酰胺-甲基丙烯酸羟乙酯共聚物[P(AA-AM-HMA)]共混，并且以合成的两亲聚合物为共混试样的增容剂实施增容，讨论了吸水树脂以及增容荆对共混试样的力学性能和溶胀性能的影响。结果表明简单共混时随吸水树脂量增大。共混试样的拉伸强度降低，其吸水率增大。CPE-g-PEG的加入改善了试样的力学性能，与氯化聚乙烯／丙烯酸-丙烯酰胺共聚物共混体系相比，CPE／丙烯酸-丙烯酰胺．羟甲基丙烯酸共聚物试样吸水慢．平衡吸水率较大，质量损失率较小，而且受盐的影响较小。     

影响单丝牌号5000S产品质量的因素分析

单丝牌号5000S是大庆HDPE装置的主要产品,适用于加工渔网丝、编织袋等产品。作者们讨论了产品的物性参数特点,分析了以往产品质量存在的主要问题。从工艺技术方面对于如何提高5000S产品的优级品率,提高产品的加工性能和使用性能进行了讨论。