中小型变压器供电电机起动方式的选择

通过分析和计算及实例，从允许电压降范围和电动机母线电压校验两方面叙述了电动机起动时如何合理地选择起动的方式。     

最新水冷式全固态数字调幅600kW中波发射机

数字调幅制式是当前国际上较先进的调制技术，ＤＸ系列全固态数字调幅中波发射机的电声指标和工业效率都是很先进的，过去的ＤＸ大功率机采用风冷方式，本文介绍了最新水冷ＤＸ－６００发射机的设备情况和技术特点。     

关于单位工程施工进度计划两种表示方式的研究

通过实例指出单位工程施工进度计划的两种表示形式在应用中出现的不同结果,并分析了其中的原因。     

自聚焦棒耦合性能的分析

本文采用光线光学的原理分析了自聚焦棒（ＧＲＩＮ）的光学性能，在折射率分布为抛物线近似的条件下，推导出较为简单的ＧＲＩＮ中的光线轨迹方程，并实验测量了ＧＲＩＮ的耦合效率，从而由理论和实验两方面讨论ＧＲＩＮ的聚焦特性。     

弧形小方坯连铸机的引锭杆和铸坯导向及二冷装置

本文介绍了弧形小方坯连铸机几种类型的引锭杆和与不同引锭杆相适应的铸坯导向及二冷装置，并讨论了有关设备的结构特性及其优缺点。     

卷烟信息网络防伪系统的构建及应用

介绍了卷烟信息网络防伪管理系统构建原理、技术特点和功能 ,及其在烟草行业中的应用。     

Datum-Hierarchy Tree Method for Tolerance Analysis of Plating and Heat Treatment Operations

This paper presents a new method for the tolerance analysis of plating and heat treatment operations. It is suitable for both manual and computerised tolerance analysis. The new method uses a datum-hierarchy tree to identify tolerance stacks and a stock removal set matrix to calculate the positions of surfaces created during the manufacturing sequence. A tolerance chart is used to associate stock removal sets with the geometry of the workpiece, to show the manufacturing sequence, and to record the operation data and the tolerance analysis results. Plating and heat treatment operations are represented as edges in the tree, so that for each operation (edge) the input and output nodes represent consecutive surfaces in a stock removal set. Rules are given for calculating the tolerance stackups and the positions of the surfaces in the stock removal sets. The method is illustrated with an example.     

小方坯连铸机的发展

本文论述了小方坯连铸机的发展趋势，包括新机型、新设备，并分项介绍了各主要部件的改进情况和发展特点。     

Stress Concentration Factors for a Circular Hole in Curved Beams Under Bending Loads

Abstract: As a contribution to the field of stress concentration studies, the case of circular hole in curved bar elements under bending is hereby studied. Trend values of stress concentration factors (SCF) are presented based on selected variables of the problem for two critical hole locations. The results will help to identify an SCF law for practical use by applying the statistical method of regression analysis. Two approximations obtained by means of computational methods are compared with those obtained by photoelastic experimental method.     

复合射孔枪枪身材料动态本构关系的试验研究

为确定复合射孔枪枪身材料32CrMo4钢在井下高温、高加载率工作环境下的动态性能,利用MTS试验机和分离式Hopkinson冲击压杆装置做了应变率为0.001、1000和3000/s,温度为294、373、473和573K的单轴动态压缩试验,得到32CrMo4钢各组温度及应变率下的流动应力-应变曲线。拟合得到该钢Johnson-Cook本构关系模型所需的5个参数,模型拟合曲线与试验曲线吻合。