TATB基高聚物粘结炸药低温老化后的结构和热性能研究

将TATB基高聚物粘结炸药在0，－10，－20，－30，－40℃的条件下贮存120天，利用红外光谱测定其分子结构的特征，并 利用真空安定性试验、热失重以及差热分析测定低温贮存前后的热稳定性，结果表明：TATB基高聚物粘结炸药经低温贮存后分子结构没有发生改变，热稳定性较好，说明低温贮存对TATB基高聚物粘结炸药影响不大。     

体积-表面淬火中加热温度的自动控制

根据表面-体积淬火奥氏体规范的要求，分析了感应加热过程中温度控制的特点和方式，并介绍了采用红外线光导纤维测温和微机控温技术成功用于体积-表面淬火中透热温度的自动控制。     

DDS—1型多功能电子实验箱

在进行各种电子实验、研制电子产品的过程中 ,信号源及各种测量仪表是必不可少的。DDS- 1型多功能电子实验箱即可满足这方面的需要。它自备 5路电源 ,能产生多种标准的模拟信号和数字信号 ;同时可方便地用来对各种信号的幅度、频率、工作状态等进行测量和显示 ;具有宽阔的实验操作平台、手提式机箱及组装式平面结构 ,使用、维护、携带均很方便。本文介绍该实验箱的功能、原理及设计特点。     

常减压蒸饱装置几起典型硫腐蚀事例分析

随着高（含）硫原油加工量的增加,硫腐蚀事故也时有发生。通过对常减压装置硫腐蚀事例进行分析,指出合理的混炼比,加强“一脱三注”管理,材料升级和实施腐蚀监测是防止腐蚀事故发生的有效措施。     

铜基催化剂孔隙率对气体有效扩散系数的影响

研究了18种具有不同孔结构参数的粒状铜基甲醇合成催化剂孔隙率对有效扩散系数的影响。结果发现，催化剂微孔孔隙率增大，曲节因子亦增大，扩散阻力增加。将孔隙率与催化剂曲节因子关联，得到了半经验方程，用它可估算催化剂的曲节因子。     

Conditions for the Acceptance of Deontic Conditionals.

Recent psychological research has investigated how people assess the probability of an indicative conditional. Most people give the conditional probability of q given p as the probability of if p then q. Asking about the probability of an indicative conditional, one is in effect asking about its acceptability. But on what basis are deontic conditionals judged to be acceptable or unacceptable? Using a decision theoretic analysis, we argue that a deontic conditional, of the form if p then must q or if p then may q, will be judged acceptable to the extent that the p & q possibility is preferred to the p & not-q possibility. Two experiments are reported in which this prediction was upheld. There was also evidence that the pragmatic suitability of permission rules is partly determined by evaluations of the not-p & q possibility. Implications of these results for theories of deontic reasoning are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

三峡水电站充水保压蜗壳平面非线性分析

采用自编的三维钢筋混凝土非线性有限元程序，对三峡水电站充水保压蜗壳进行了平面非线性分析，分析了钢蜗壳及外围钢筋混凝土的应力变形特性。非线性计算分析表明，在蜗壳进口断面处，虽然外围混凝土较薄，但在设计内水压力、结构自重和设备重量这些荷载组合作用下，蜗壳进口断面混凝土可能不会开裂，因此钢材应力均比较低，结构具有较高的安全度。说明现有配筋方案钢筋用量可能偏多，没有充分发挥钢材的作用，在进一步设计时可以适当优化。     

Synthesizing plans that contain actions with context-dependent effects1

This paper presents a method of solving planning problems that involve actions whose effects change according to the situations in which they are performed. The approach is an extension of the conventional planning methodology in which plans are constructed through an iterative process of scanning for goals that are not yet satisfied, inserting actions to achieve them, and introducing subgoals to these actions. This methodology was originally developed under the assumption that one would be dealing exclusively with actions that produce the same effects in every situation. The extension involves introducing additional subgoals to actions above and beyond the preconditions of execution normally introduced. These additional subgoals, called secondary preconditions, ensure that the actions are performed in contexts conducive to producing the effects we desire. This paper defines and analyzes secondary preconditions from a mathematically rigorous standpoint and demonstrates how they can be derived from regression operators.