LLC谐振变换器的扩展描述函数法建模

给出了LLC谐振变换器的等效电路,基于扩展描述函数法建立了该等效电路的小信号模型、得到了LLC变换器的稳态解及其直流电压增益特性。借助PSpice仿真软件得到了该变换器在不同开关频率和不同电路参数下输出变量对控制变量的频率特性曲线。分析了开关频率、输入电压、占空比、品质因数和负载等主要参数对频率特性的影响。所作的工作对变换器参数的优化设计、闭环控制及动态性能设计具有指导意义。     

钢铁企业常见变频器维修

钢铁厂采用的变频器有很多种,现针对常用的丹佛斯、两门子、ABB变频器出现的故障,总结概括维修经验,对部分故障进行分析,供有关技术人员在维修变频器时借鉴.     

基于S120变频器的转炉倾动主从控制设计及应用

随着SINAMICS S120在工控领域的应用,越来越多的成功应用案例随之产生,主从控制方案就是一个典型的案例,在许多工业领域得到了应用.本文主要介绍了转炉倾动控制系统的主从控制方案设计,实现变频器主从自动切换的调试过程及注意事项.     

国内外甲醇市场状况及合成工艺进展

论述了国外甲醇生产和消费现状。中国甲醇的生产、消费和近年来中国甲醇的进口状况。简单介绍了甲醇几种气相合成工艺和液相合成工艺现状及进展。     

氨合成塔催化剂中毒原因分析及处理

介绍合成塔催化剂因合成气压缩机段间水冷器泄漏而致水中毒的情况，分析水中毒的原因及处理过程，介绍了段间水冷器泄漏情况下装置的运行方案。     

Unsteady temperature fields of monoliths in catalytic converters

This paper measured unsteady temperature fields of uncoated-monolith and catalytic monolith under real engine operating conditions using thermocouples. A multi-dimensional flow model of the turbulence, heat and mass transfer, and chemical reactions in monoliths was established and numerically solved in the whole flow field of the catalytic converter. The purpose of this paper is to study unsteady warm-up characteristics of the monoliths and to investigate effects of inlet cone structure on temperature distribution of the catalytic converter. Experimental results show that the warm-up behaviors between uncoated-monolith and catalytic monolith are quite different. Simulation results indicate that the established model can qualitatively predict the warm-up characteristics. Increasing the inlet cone angle can improve the light-off characteristics of the catalysts due to high flow velocity and high temperature in the center of the monoliths.     

Z源直流变换器电感电流断续工作模式分析

Z源变换器具有新型的拓扑结构,在输入直流电源和输出变换器之间采用独特的Z源网络进行连接,以获得更好的升/降压效果.在电感电流断续条件下,对Z源直流变换器的工作状态进行了详细分析,利用稳态条件下电感平均电流为零的条件推导出Z源直流变换器的升压比,进一步分析出临界电感的计算公式,并通过仿真验证了理论分析的正确性.     

Mathematical model of deoxidization with post stirring in a combined blowing converter

Dissolved oxygen in the steel at the terminal of the converter smelting process is the main cause for the formation of oxide inclusions, and the high terminal oxygen content worsens the steel cleanness. However, post stirring in a combined blowing converter can promote the carbon-oxygen reaction in the liquid steel and reduce the dissolved oxygen content at the terminal of the converter smelting process. Thus, the mathematical model of deoxidization in the post stirring process was obtained, and the rationa...     

Power management unit chip design for automobile active-matrix organic light-emitting diode display module

A power management unit (PMU) chip supplying dual panel supply voltage, which has a low electro-magnetic interference (EMI) characteristic and is favorable for miniaturization, is designed. A two-phase charge pump circuit using external pumping capacitor increases its pumping current and works out the charge-loss problem by using bulk-potential biasing circuit. A low-power start-up circuit is also proposed to reduce the power consumption of the band-gap reference voltage generator. And the ring oscillator used in the ELVSS power circuit is designed with logic devices by supplying the logic power supply to reduce the layout area. The PMU chip is designed with MagnaChip’s 0.25 μm high-voltage process. The driving currents of ELVDD and ELVSS are more than 50 mA when a SPICE simulation is done.     

VSC—HVDC系统的控制策略及其仿真研究

建立了VSC-HVDC系统的数学模型,基于鲁棒控制理论,将系统对VSC-HVDC的控制目标转化为对其交流侧有功和无功电流的控制来实现,并进行了控制方案设计．仿真实验表明所设计的控制器能够快速反应达到预定的指令目标,具有良好的鲁棒性．