Thermoplastic elastomeric composition based on maleic anhydride–grafted ground rubber tire

Ground rubber tire (GRT) powder was maleated in an internal mixer using maleic anhydride and dicumyl peroxide at 160°C. Maleated GRT was characterized by using X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, wettability, and differential scanning calorimetry. The physical properties of the dynamically vulcanized 60 : 40, rubber : plastic composition based on acrylated high‐density polyethylene as the plastic phase and ethylene propylene diene rubber containing maleated GRT as the rubber phase were found to be greater than the corresponding composition containing nonmaleated GRT. The blend was found to be reprocessable, like themoplastic elastomers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 370–378, 2002; DOI 10.1002/app.10348     

丁腈橡胶/导电粒子复合材料的正温度系数(PTC)特性

将导电粒子碳黑和铜粉分别与丁腈橡胶混合制备导电聚合物复合材料，其中碳黑（Ｎ５５０）／丁腈橡胶复合材料的电阻率随温度的变化呈现较强的正温度系数（ＰＴＣ）效应。讨论了掺入导电粒子浓度、结构和表面性质以及混炼硫化工艺等对该类材料的室温电阻率及ＰＴＣ效应的影响。     

自锁式景观砌块加筋挡土结构的设计与应用

介绍砌块仿花岗岩挡土结构的特点和砌块形状,针对砌块挡土结构在我国刚开始应用,没有设计、施工规范的现状,依托可以借鉴的加筋挡土结构和浆砌块石挡土结构设计规范,提出了自锁式砌块加筋挡土结构设计中的地面荷载强度及土压力计算方法、砌块层间稳定验算方法、加筋长度和间距验算方法、挡土结构整体稳定验算方法和施工过程中需要注意的主要问题,为自锁式砌块加筋挡土结构设计人员提供了设计验算内容、验算方法和安全系数取值范围,为现场施工和监理人员提供参考,并为该类型的挡土结构推广应用提供技术支持。     

Microstructure-related fracture toughness and fatigue crack growth behaviour in toughened, anhydride-cured epoxy resins

Fracture toughness and fatigue crack propagation (FCP) of plain and modified anhydride-cured epoxy resin (EP) were studied at ambient temperature. Liquid carboxyl-terminated acrylonitrile-butadiene (CTBN) and silicon (SI) rubber dispersions were used as tougheners for the EP. The morphology of the modified EP was characterized by dynamic mechanical analysis (DMA) and by scanning electron microscopy (SEM). The fracture toughness, K_c, of the compositions decreased with increasing deformation rate. K_c of the EP was slightly improved by CTBN addition and practically unaffected by incorporation of the SI dispersion when tests were performed at low cross-head speed, v. Both modifiers improved K_c at high v, and also the resistance to FCP, by shifting the curves to higher stress intensity factor ranges, ΔK, by comparison with the plain EP. It was established that both fracture and fatigue performance rely on the compliance, J_R, at the rubbery plateau, and thus on the apparent molecular mass between crosslinks, M_c. The failure mechanisms were less dependent upon the loading mode (fracture, fatigue), but differed basically for the various modifiers. Rubber-induced cavitation and shear yielding of the EP were dominant for CTBN, whereas crack bifurcation and branching controlled the cracking in SI-modified EP. The simultaneous use of both modifiers resulted in a synergistic effect for both the fracture toughness at high deformation rate and the FCP behavior.     

顺丁橡胶生产过程"门尼升值"的原因研究

研究了顺丁橡胶生产过程中门尼升值的原因。结果表明，顺丁橡胶生产后处理的膨胀干燥过程存在门尼升值现象。不同内在质量的顺丁橡胶门尼升值不同，正常条件下门尼升值发生于门尼粘度的测试过程。     

宁波溪口抽水蓄能电站下库面板堆石坝观测资料分析

溪口蓄能电站下库面板堆石坝最大坝高44.5m,施工期间布置的原型观测项目有坝体内部沉降和水平位移、周边缝和板间缝位移、面板应变以及坝基孔隙水压力。根据观测仪器自埋设至2000年的观测资料,文中分析了各项观测物理量的变化规律和变化趋势,综合评价了大坝的工作性态。     

Y型密封圈橡胶模设计

介绍了Y型橡胶模具的设计 ,重点对模具结构和模腔尺寸进行了分析和阐述 ,经生产验证 ,此模具结构合理 ,定位可靠 ,操作方便 ,从而为同类产品的设计提供了参考。     

浅谈中承式钢管拱肋单拱桥的施工方法

右江平圩大桥钢管拱肋的制作、拼装、吊装、混凝土灌注的施工方法及注意事项 ,事故原因分析及处理。     

SP预应力空心板在居住建筑中的应用和发展

分析现浇板和传统预制板的特点和弱点，提出发展SP板和SP叠合板是住宅实现大开间、灵活隔断的有效途径之一，也是建筑施工实现现代化的重要内容之一。     

高层钢-钢骨混凝土混合结构的设计研究

结合一幢高层钢 钢骨混凝土混合结构的设计 ,着重介绍了在罕遇地震作用下采用层模型和空间模型的弹塑性分析计算结果、钢骨混凝土柱与钢梁的计算、节点设计及相应的构造措施 ,供结构工程师参考。