地下连续墙在太钢老厂改造工程中的应用

结合某深基坑支护施工实例 ,介绍了采用多头潜水钻成槽机进行地下连续墙施工的基本原理、工艺流程及注意事项。指出该方案对于在老厂区改造工程狭窄场地条件下 ,解决深基坑施工保护附近建 (构 )筑物安全具有独特的优势     

Numerical simulations of cantilever beam response with saturation control and full modal coupling

Numerical simulations of the response of a uniform, cantilever beam subjected to a base excitation are performed. A saturation absorber is implemented to control the beam response. In previous investigations of similar configurations, the inertial and structural properties of the piezoelectric actuators have been neglected, resulting in an analytical model of a uniform beam. This investigation includes the nonuniformities in the beam properties that are introduced when piezoelectric actuators are bonded to the uniform beam. The resulting coupling between uniform, cantilever beam modes is fully included in the analytical model. It is shown that this modal coupling has a significant effect on the beam response, which is not present when modal coupling is neglected.     

时空效应规律在软土深基坑工程中的运用

阐述了时空效应规律在软土深基坑工程中的运用情况，实践证明，运用时空效应规律，能可靠而合理地利用土体自身在基坑开挖过程中控制土体位移的潜力而达到保护环境的目的。     

High Gd Concentration GaGdN Grown at Low Temperatures

GaGdN layers were grown at temperatures below 300°C by radio-frequency plasma-assisted molecular beam epitaxy on sapphire substrates. GaGdN samples with high Gd concentration as high as 12.5% were obtained by lowering the growth temperature. X-ray diffraction results showed no obvious secondary phase, which means that the phase separation can be suppressed by the growth at low temperatures. All samples, including those grown at room temperature, showed ferromagnetic characteristics. Photoluminescence emission was observed, though spectra exhibit broad and sharp luminescence bands related to many kinds of defects. It is suggested that electrons coming from defects, especially, nitrogen vacancy, stabilize ferromagnetism, and that the carrier-induced ferromagnetism occurs in the low-temperature-growth GaGdN.     

岩石圈深部探测与青藏高原研究

论述了岩石圈深部探测的作用和重大意义，它是一项国土基础地质情况的调查，可以为找矿预测、地震预报、能源开发及大陆动力学研究等多目标服务,是21世纪中国区域地质调查的重要内容，是一项伟大的科学工程；美国、前苏联和中国此前均已作了大量工作，但是有待深化和进一步开展调查；简要介绍了青藏高原近些年来开展深部调查的情况和取得的主要最新成果。     

阶梯教室、图书馆的结构设计

结合阶梯大教室的结构布置设计和预应力混凝土技术的运用，阐述该类结构的合理布置和预应力梁设计方法。     

软启动器在深井泵电动机上的应用

论述了几种三相交流异步电动机的起动方式及其优缺点 ,介绍了新型的电子软启动方式在我厂深井泵电动机上的应用及取得的运行效果 ,为电动机软启动方式在工矿企业中的应用提供了应用经验。     

Microscale and mesoscale discrete models for dynamic fracture of structures built of brittle material

In this work we present the discrete models for dynamic fracture of structures built of brittle materials. The models construction is based on Voronoi cell representation of the heterogeneous structure, with the beam lattice network used to model the cohesive and compressive forces between the neighboring cells. Each lattice component is a geometrically exact shear deformable beam which can describe large rigid body motion and the most salient fracture mechanisms. The latter can be represented through the corresponding form of the beam constitutive equations, which are derived either at microscale with random distribution of material properties or at a mesoscale with average deterministic values. The proposed models are also placed within the framework of dynamics, where special attention is paid to constructing the lattice network mass matrix as well as the corresponding time-stepping schemes. Numerical simulations of compression and bending tests is given to illustrate the models performance.     

Determination of the Coordinates of the Center of a Gaussian Beam by Means of a Matrix Photodetector Using a Weighting Method

A weighting algorithm to determine the coordinates of the center of a Gaussian laser beam projected onto a matrix photodetector is considered. The influence of the internal noise of the photodetector, the maximum brightness of the signal at the beam maximum, and the beam radius on the precision of the algorithm is investigated. Recommendations on image processing are presented.     

Polarity control of GaN epilayers grown on ZnO templates

We report the successful growth of Ga-polar GaN epilayers on O-polar ZnO templates pre-deposited on c-sapphire. Prior to GaN growth, NH₃ is exposed onto the ZnO template. The polarity of the GaN layers is confirmed by etching of the surface and by conversion beam electron diffraction (CBED), while the O-polar ZnO is confirmed by CBED. It is suggested that the NH₃ pre-exposure helps form a Zn₃N₂ layer, which possesses inversion symmetry and inverts the crystal from anion polar to cation polar.