辐射肉品的特性及其质量控制研究

主要阐述了辐射技术对肉品微生物和肉品品质的影响,提出了对辐射肉品进行质量控制的措施,并对几种常用的肉品质量检测方法进行了阐述。     

非金属夹杂物对硬线盘条拉拔性能的影响及其工艺控制

分析了非金属夹杂物对硬线盘条拉拔性能的影响及其来源 ,通过考察分析冶炼、浇注生产工艺针对非金属夹杂物含量的影响 ,提出了避免或减少非金属夹杂物含量的工艺控制方法。     

Analytical prediction of composite beams response in fire situations

In this paper an extension of the method of the Fourier series expansion to the fire analysis of composite beams is presented. In particular the extension concerns the introduction of the temperature dependent interaction of all the components: steel beams, concrete slab and steel connectors. These last are considered of finite stiffness, and a proper account is given to the combined effect of thermal degradation of the properties, and stress amplification caused by the differential thermal expansion across the interface.The proposed method compares very well with some experimental fire tests of simply supported and framed composite beams. Due to its relative simplicity and speed, it can be used for design purposes in evaluating the critical temperature in terms of critical deflection. Finally we recall that the method is capable of dealing with every type of fastening distribution, such as discontinuous or variable length.     

激光束偏转法检测金属表面层的缺陷

本文编程计算了由激光光热应产业的金属表面的温度分布和泵浦光的调制频率、金属层厚度等的关系，预言检测浓度缺陷的能力。用激光光束偏转法检测到表面下不同深处的缺陷，并把面扫描幅值信号以三维象和灰度象显示。     

岩石爆破中爆炸能量分布理论与控制方法研究进展

文中对岩石爆破过程中爆炸能量分布理论与控制方法的发展现状进行了综述，分析了爆炸能量分布理论与控制方法有待进一步研究的问题，并指出了该课题的研究具有重要的理论和实践意义。     

Dynamic elastic-plastic behaviour of whipping pipes: experiments and theoretical model

This paper is concerned with the problem of pipe whip, the dynamic response of a high pressure piping system subjected to an end force as the result of a pipe break which releases a jet of fluid from the broken section. Both experimental and theoretical results are presented concerning the dynamic elastic-plastic behaviour of cantilever pipes subjected to a transverse force pulse at the free end. Comparisons between experimental data and theoretical predictions are made for mild-steel pipes with outer diameter-to-thickness ratios of 19.5, 28 and 32. It is demonstrated that, for these geometries, the whipping pipes display three characteristically different responses, viz. elastic, plastic hardening behaviour for thick pipes, elastic, plastic hardening-softening behaviour for moderately thick pipes and elastic, plastic hardening-softening-collapse behaviour for thinner pipes. The experimental data taken from a series of high-speed films are compared with the predictions of the instantaneous shapes of the whipping pipes derived from both a rigid, perfectly-plastic, large deflection, dynamic beam model and a more comprehensive model which incorporates the effects of elasticity and plastic hardening and softening, the details of which are presented in the paper.     

新城金矿采场落矿控制爆破技术

新城金矿为蚀变岩型金矿床,由于受地质构造影响,顶板稳定性较差,局部和较大面积的顶板冒落现象时有发生,为了解决采场顶板安全问题和提高落矿主要技术经济指标而进行了“上向水平分层尾砂胶结充填法采场控制爆破技术”的试验研究工作,试验达到了预期效果。     

浅谈住宅工程的水电施工质量控制

介绍了住宅工程水电安装全过程的质量控制要点。     

Greedy hot-potato routing on the two-dimensional mesh

Summary We propose hot-potato (or, deflection) packet routing algorithms on the two-dimensional mesh. The algorithms are strongly greedy in the sense that they attempt to send packets in good directions whenever possible. Furthermore, the routing operations are simple and independent of the time that has elapsed. The first algorithm gives the best evacuation time known for delivering all the packets to their destinations. A batch ofk packets with maximal source-to-destination distanced _max is delivered in 2(k-1)+d _max. The second algorithm improves this bound tok+d _max when all packets are destined to the same node. This also implies a new bound for the multitarget case, which is the first to take into account the number of in-edges of a node. The third algorithm is designed for routing permutations with source-to-destination distance at most three, in which case the algorithm terminates in at most seven steps. We also show a lower bound of five steps for this problem. Ishai Ben-Aroya received the B.A. and M.Sc. in computer science from the Technion (Israel Institute of Technology). He is currently working with Microsoft Israel R&D group. His main interests include Routing Algorithms, Cryptography and Computer Security. Tamar Eilam received the B.A. degree in Computer Science from the Technion IIL in 1995, and is currently studying towards her M.A. degree. Assaf Schuster received his B.A., M.A. and Ph.D. degrees in Computer Science from the Hebrew University of Jerusalem (the last one in 1991). He is currently a lecturer at the Technion IIL. His main interests include Networks and Routing Algorithms, Parallel and Distributed Computation, Optical Computation and Communication, Dynamically Reconfiguring Networks, and Greedy Hot Potato Routing.This work was supported in part by the French-Israeli grant for cooperation in Computer Science, and by a grant from the Israeli Ministry of Science. An extended abstract appeared in proc. 2nd European Symposium on Algorithms, September 1994     

原子力显微术

本文首先介绍了原子力显微术的基本理论，其次讨论了原子力显微镜的结构原理，主要报导了一台我们研制的使用光学偏转法检测的原子力显微镜及仪器性能，仪器测试的结果表明我们这台原子力显微镜获得了原子分辨率，最后给出使用这台显微镜的首批实验结果。