铑含量对Pt-Rh-Pd/Al2O3催化剂的氧化还原性能的影响

应用微反应装置研究了铑含量对Pt-Rh-Pd/Al2O3催化剂的催化活性以及吸附性能的影响.结果表明Rh含量在0%～0.015%之间时,催化剂对CO的活性曲线呈波浪形,对NO的活性曲线为增函数;当Rh含量超过0.015%时,增加Rh的量对CO和NO的转化率几乎无影响.在无助的情况下,用Al2O3为载体制作的Pt-Rh-Pd/Al2O3催化剂,其Pt、Rh、Pd之间的最佳比例为15320.Rh含量的增加有利于氧化性气体的吸附,不利于还原性气体的吸附.     

Nitrous oxide emissions from fertilized upland fields in Thailand

Nitrous oxide (N₂O) emission from fertilized maize fields was measured using a closed chamber at four experimental sites in Thailand. The average measured N₂O flux from unfertilized plots through crop season was 4.16 ± 1.52, 5.05 ± 1.65, 5.25 ± 1.68 and 6.74 ± 2.95 g N₂O-N m^-2 h^-1, at Nakhon Sawan, Phra Phutthabat, Khon Kaen and Chiang Mai, respectively. Increased N₂O emissions by the application of nitrogen fertilizer were 0.22–0.44, 0.19–0.38%, 0.12–0.24 and 0.08–0.15% of the applied N, respectively. Compared to other data, N₂O emission rate to applied nitrogen was not significantly different between the data of Thailand and the Temperate Zone.     

开发人力资源 加快技术创新 重铸景德镇陶瓷辉煌

本文讨论了景德镇陶瓷业存在的问题，并探讨如何更好地发展景德镇陶瓷业，从而实现再度辉煌。     

Morphologic study of electrochemically formed lead dioxide

Various electrochemical methods with different conditions were used to prepare lead dioxide (PbO₂). The observation revealed that the morphology of deposited PbO₂ could be controlled by simply changing deposition parameters. Under the condition of oxygen evolution, which dominates the electrode process, uniformly distributed high porous structured PbO₂ was formed. The results indicated that large current density or high potential polarization should be one of the most important and necessary factors for forming high surface area PbO₂ deposit. Only β-PbO₂ was identified by X-ray diffraction measurement for the deposit prepared by present methods and solution. One potential application of this method is to prepare nanoscaled PbO₂ parallel lines.     

Thermodynamic Analysis of Chemical Vapor Deposition of BN + AIN Composite Coatings

Thermodynamic calculations were performed using a modified solgasmix-pv computer program in order to study the feasibility of codepositing boron nitride (BN) plus aluminum nitride (AIN) by chemical vapor deposition. Reactants considered were AICl₃, BCl₃ or B₂H₆, NH₃, and H₂. Deposition diagrams were generated for the BCl₃-AICl₃-NH₃ system over a range of processing conditions such as temperature, total system pressure, and reagent concentrations. Codeposition of BN + AIN was predicted by the calculations for temperatures in the range of 900 to 1700 K and pressures of 10.13 to 101.3 kPa. The predicted deposition efficiency at equilibrium was much higher for BN than for AlN at most reagent compositions. The AlN deposition efficiency increased with decreasing temperature and decreasing BCl₃ content, with increasing NH₃ content, or with the addition of H₂. Aluminum chlorides were found to be the dominant gaseous species.     

气体流量对化学气相沉积法制备碳纳米管的影响

用化学气相沉积法裂解乙炔制备无序多壁碳纳米管,以Fe/S iO2粉状物作为催化剂,考察了气体流量等环境因素对碳纳米管生长的影响。通过TEM和SEM分析得出,当N2流量分别为200、500和800 mL/m in时,碳纳米管的平均直径分别为20、36和82 nm,即碳纳米管的直径随着N2流量的升高而增大。当N2流量增加到800mL/m in时,还生成了大量的直径约为20~30 nm的碳纳米球。不通H2制备不出碳纳米管。     

建立和完善企业内部控制制度探讨

有效实施内部会计控制,关键在于单位内部会计控制系统自身的科学性、合理性,其运作管理的严肃性,对内部会计控制实施的监督检查的严格性。     

炭石墨制品抗冲击强度试验方法的研究

概述了炭石墨制品抗冲击强度试验方法的研究过程，并用误差估计理论论证了该方法的科学性和可行性。     

溶液雾化微波等离子体CVD法制备SrTiO3薄膜

研究了一种新型高效制备多组分陶瓷薄膜的方法，它采用可溶性无机盐溶液雾化为反应膜，利用微波等离子体化学气相沉积工艺在Al2O3基片上制备了SrTiO3基陶瓷薄膜，实验结果表明，薄膜沉积时衬底温度对成膜的相组成与结构产生重要影响，本实验中当沉积薄膜衬底温度在700℃时，可以制备出单一相组成，符合化学计量比，结晶性较好，晶粒度呈球形且均匀分布的SrTiO3薄膜，通过对不同氧分压下薄膜电阻测试，发现此SrTiO3薄膜在O2 N2气氛中氧浓度由1%变化到20%时，其电阻值由5.0MΩ变化到2.5MΩ，从而显示出一定氧敏性能。     

新形势下做好长江入河排污口管理的思考

从长江流域水质现状、入河污染物排放基本情况及国家关于长江经济带绿色发展的总体要求出发,分析了长江水资源保护面临的形势;从长江入河排污口区划、审批、监管及基础工作方面,对入河排污口管理现状进行了简要总结,并对存在的问题进行了梳理。基于长江入河排污口管理面临的形势,提出了长江委强化长江入河排污口管理的总体思路和重点工作,可以为新形势下做好长江入河排污口管理提供参考。