叠后记录Radon变换压制干扰方法

在叠加剖面中,下伏反射界面的反射信号同相轴呈连续的或带有限个间断点的连续层状图像,各种干扰则呈无规则的图像。对此剖面的振幅数据进行 Radon 变换,即分别向各方向进行投影,层状图像将产生一定形状的光滑曲线,而干扰数据将相互抵消,其剩余数据呈高斯分布。在Radon 域中通过平滑等方法消除这些呈高斯分布的噪声数据,再经 Radon 逆变换,便可获得信噪比较高的叠加剖面。其结果不改变原叠加剖面的分辨率和信号波形特征。理论与实际剖面的处理结果表明,这是一种良好的压制干扰方法。     

一般应力比时焊接结构S－N曲线的预测方法

本文考虑了焊接结构的几何形状、受载形式、应力比、残余应力、尺寸效应以及材料等因素对疲劳寿命的影响，利用Ｐｅｔｅｒｓｏｎ公式和极值疲劳切口系数概念，建立了一般应力比时焊接结构Ｓ－Ｎ曲线的预估模型．文中对几类典型的焊接结构的Ｓ－Ｎ曲线进行了预测，预测值与实验结果符合较好．本文方法可以大量减少疲劳实验，具有一定的工程实用价值．     

关于电视群信号对光纤副载波调频传输中的信噪比平衡问题的分析

本文对微波副载波用电视群信号调频的光纤传输中的信噪比平衡问题进行了分析,推导出VSB-AM信号在解调后的信噪比表达式,引入了信噪比恶化系数的概念.为了实现多路VSB-AM信号间的信噪比的平衡,相应的微波副载波频偏应有确定的比例关系.     

表面稳定模式铁电液晶的电光特性测试

采用一种改进的高分子膜摩擦定向法成功地实现了表面稳定模式铁电液晶的光学双稳态，对比度大于１４０，响应时间达１００微秒。     

Prescheduling policy for real-time concurrency control: A performance evaluation

A new priority management policy, aprescheduling policy, is proposed. This policy can be applied on any conventional concurrency control protocol to schedule a real-time transaction. Costly preemption is avoided by the prescheduling policy, and parsing dataset of a transaction is not needed. Three widely used conventional concurrency control protocols (dynamic two-phase locking, basic timestamp ordering, and optimistic) are incorporated with the prescheduling policy to form three real-time concurrency control protocols. Performance of the three protocols is evaluated from three different viewpoints: database management systems, protocols, and transaction. From a database management system viewpoint, we show the prescheduling policy can improve the performance of protocols by raising thevalid ratio and reducingrestart counts. In general, two-phase locking with the prescheduling policy performs the best in most cases and yields the best choice for concurrency control in a real-time application. Deciding factors that affect performance of each protocol are identified from protocol viewpoint. Some suggestions are given for writing a timely transaction from the aspect of transaction viewpoint.     

氮对纳米硅氮薄膜品化的影响

在电容式耦合等离子体化学气相沉积系统中，用高氢稀释硅烷和氮气为反应气氛制备纳米硅氮（ｎｃ－ＳｉＮｘ：Ｈ）薄膜结果表明：当Ｎ＿２／ＳｉＨ＿４气体流量比（Ｘｎ）从１增加为４时，薄膜的晶态年从５８％降至１４％，晶粒尺寸从１０ｎｍ降至５ｕｍ，Ｎ／Ｓｉ含量比从０．０３增至０．１２．当Ｘｎ≥５，则生成非晶硅氮（ａ－ＳｉＮｘ：Ｈ）薄膜．当Ｘｎ从１增加为１０时，薄膜暗电导率从１０￣（－５）（Ωｃｍ）￣（－１）降至１０￣（－１１）（Ωｃｍ）￣（－１），具有逾渗行为，这与薄膜的晶态率紧密相关．     

强度型光纤传感器的信号检测系统

本文阐述了一种可提高强度型光纤传感器测量精度的检测系统。该系统利用同一检测电路交替检测信号、参考通道的输出信号，并将信号、参考两通道的检测结果相除，从而消除了因发光二极管光源波动及检测电路系统不稳定所带来的误差。采用同步相关技术抑制了噪声，提高了输出信噪比。实验证明，当时间常数ＲＣ为０．０５Ｓ时，采用该检测系统可获得优于千分之一的零点稳定性和优于２×１０３的输出信噪比。     

Influence of two-step process and of different stoichiometric ratios on morphologies generated in castor oil epoxy resins

Phase separation during polymerization was studied in a model system consisting of a diepoxide based on diglycidyl ether of bisphenol A (DGEBA), variable amounts of ethylenediamine (EDA) and the mass of castor oil (CO) necessary to obtain a mass fraction equal to 0-15 in a final system where the stoichiometric ratio of amine to epoxy equivalents, r, was equal to 1. A two-step polymerization process was performed by curing first a system with r = 0-5, during variable times before phase separation, and then carrying the system to r = 1. Thermodynamic analysis of samples with different r values led to a linear relationship between the Flory-Huggins interaction parameter and r. The concentration (P) and average size (D?) of dispersed-phase particles followed opposite trends, i.e. P increased while D? decreased, when either r was increased or the time of curing in the first step of a two-step process was decreased. This was explained by assuming that the competition between nucleation and growth was determined by the viscosity at the cloud point, η_cp. Low values of η_cp favoured growth over nucleation and led to fewer but larger particles.     

无间隙原子钢的微观结构特征和塑性应变比

采用Ｘ射线衍射的ＯＤＦ和ＬＰ分析技术，ＳＥＭ电子通道花样和蚀坑技术观测，研究了超深冲无间隙原子钢板的微观结构特征。结果表明：控制化学成分、保证基体纯净、优选工艺参数，促进强的γ－〈１１１〉∥Ｎ．Ｄ纤维织构的形成是获得优异成型性的关键。用ＣＭＴＰ方法，由ＯＤＦ织构数据从理论计算了塑性应变比（ｒ），表明ｒｍ值高达３．１８。文中讨论了再结晶织构形成机制。     

90°分束偏光镜光强分束比研究

给出了90°分束偏光镜的e,o光光强分束比的计算公式,以及光强分束比随光波长的变化曲线;在6328Å测得的光强分束比与计算值是一致的。