保护储层的无固相压井液

研制出了具有保护储层效果的无固相压井液，其基液配方为0．5％LG－1－1＋0．4％LG－2＋1％小阳离子＋0．1％其它。此外还研究开发出了无机盐增溶剂LG－3，加入LG－3可加宽低成本无机盐的使用范围，很大程度地降低压井液配液成本和单井综合成本。该压井液密度在1．0－2．5g/cm^3之间可调，具有无固相、滤失量低、抑制性强等特点，抗温能力在120℃左右。室内性能评价结果表明，无固相压井液对高渗储层岩心的渗透率损害率平均为4．0％，对低渗储层岩心的渗透率损害率平均为2．9％，说明该体系对储层具有很好的保护效果。     

淹没水跃的数值模拟

本文通过求解时均N－S方程κ－ε紊流模型，数值模拟了淹没水跃由静止到最终稳定的全过程。采用隐式非正交同位网格有限体积法离散控制方程组，利用动网格技术跟踪自由表面，并由Orlanski开边界条件得到无反射的出口边界。文中给出了淹没水跃在不同时刻自由表面形状、内部流场结构和流速矢量的变化情况，并与试验资料进行了比较。结果表明，本文方法能够准确有效地描述淹没水跃这类复杂自由表面流动的紊动特性。     

具有除草活性的双膦酸衍生物的研究动态

许多含双膦酸结构单元的化合物都显示了良好的除草活性,本文对这类化合物的结构特点、生物活性以及相关的研究动态进行了归纳和概述。     

Measurement of Gibbs energies of formation of CoF2 and MnF2 using a new composite dispersed solid electrolyte

Gibbs energies of formation of CoF₂ and MnF₂ have been measured in the temperature range from 700 to 1100 K using Al₂O₃-dispersed CaF₂ solid electrolyte and Ni+NiF₂ as the reference electrode. The dispersed solid electrolyte has higher conductivity than pure CaF₂ thus permitting accurate measurements at lower temperatures. However, to prevent reaction between Al₂O₃ in the solid electrolyte and NiF₂ (or CoF₂) at the electrode, the dispersed solid electrolyte was coated with pure CaF₂, thus creating a composite structure. The free energies of formation of CoF₂ and MnF₂ are (± 1700) J mol⁻¹; {fx37-1} The third law analysis gives the enthalpy of formation of solid CoF₂ as ΔH° (298·15 K) = −672·69 (± 0·1) kJ mol⁻¹, which compares with a value of −671·5 (± 4) kJ mol⁻¹ given in Janaf tables. For solid MnF₂, ΔH°(298·15 K) = − 854·97 (± 0·13) kJ mol⁻¹, which is significantly different from a value of −803·3 kJ mol⁻¹ given in the compilation by Barinet al.     

Monoacylglycerols derived from butter oil by Penicillium roquefortii in suspension cultures

Structural isomers of monoacylglycerols (monoglycerides, MAGs) were identified and compared after degradation of butter oil by two strains of Penicillium roquefortii and a commercial lipase from P roquefortii (EC 3.1.1.3) at pH 7.0 and 10 °C. The conditions were selected as they were comparable with those used in the manufacture of blue mould‐ripened cheese. The commercial lipase was selected to compare with the fungal strains in terms of acyl migration. Results showed that the main isomers formed by lipolysis with the commercial lipase were sn‐2 MAGs (64 mol%), whilst spores and emerging mycelia of P roquefortii produced mainly sn‐1(3) MAGs (83–90 mol%). The work reported here may lead to further assessment of different MAG structural isomers as natural preservatives in foods and dairy products. © 2002 Society of Chemical Industry     

A new efficient method for one‐pot conversions of aryl carboxylic acids into nitriles without solvent

A new efficient method for synthesising nitriles, important organic reagents, is reported in this paper. In an environmentally benign solvent‐free system, aryl carboxylic acids were converted into the corresponding nitriles via one‐pot reactions, by amidation with ethyl carbamate followed by dehydration with thionyl chloride, in excellent yields. The results showed that the method has the advantages of lower cost, higher yield, less pollution and greater ease of work‐up. Copyright © 2008 Society of Chemical Industry     

Phase behavior of ternary blends containing dimethylpolycarbonate,tetramethylpolycarbonate and poly[styrene‐co‐(methyl methacrylate)] copolymers (or polystyrene)

The miscibility and phase behavior of ternary blends containing dimethylpolycarbonate (DMPC), tetramethylpolycarbonate (TMPC) and poly[styrene‐co‐(methyl methacrylate)] copolymer (SMMA) have been explored. Ternary blends containing polystyrene (PS) instead of SMMA were also examined. Blends of DMPC with SMMA copolymers (or PS) did not form miscible blends regardless of methyl methacrylate (MMA) content in copolymers. However, DMPC blends with SMMA (or PS) blends become miscible by adding TMPC. The miscible region of ternary blends is compared with the previously determined miscibility region of binary blends having the same chemical components and compositions. The region where the ternary blends are miscible is much narrower than that of binary blends. Based on lattice fluid theory, the observed phase behavior of ternary blends was analyzed. Even though the term representing the Gibbs free energy change of mixing for certain ternary blends had a negative value, blends were immiscible. It was revealed that a negative value of the Gibbs free energy change of mixing was not a sufficient condition for miscible ternary blends because of the asymmetry in the binary interactions involved in ternary blends. Copyright © 2004 Society of Chemical Industry     

High char‐yielding poly[acrylonitrile‐co‐(itaconic acid)‐co‐(methyl acrylate)]: synthesis and properties

Polyacrylonitrile terpolymers of various compositions consisting of acrylonitrile (AN), itaconic acid (IA) and methyl acrylate (MA) were synthesized by solution polymerization in dimethylsulfoxide. Increase in concentration of either IA or MA retarded the overall polymerization rate and the polymer molecular weight. The system consisting of AN + MA and varying IA concentration was more prone to retardation in comparison with the system composed of AN + IA with variable MA concentration. The retardation factors were quantified. Minor quantities of MA boost the reactivity of IA in the terpolymer system. The terpolymer was richer in MA vis‐à‐vis the feed. The thermal characteristics of the terpolymer were examined as a function of its composition. In contrast to the copolymer of AN and IA requiring 1–1.5 mol% IA, the terpolymer required an IA content of approximately 2.5 mol% for optimum thermal stability. The polymer with 90 mol% AN, 2.5 mol% IA and 7.5 mol% MA exhibited reasonably good char‐forming characteristics and thermal stability. The overall crystallinity and crystallite size of the polymers were found to decrease on incorporation of the comonomers. The ‘aromatization index’ of the copolymer increased with the temperature of pyrolysis through re‐organization of the tetrahydropyridine ladder structure. Copyright © 2005 Society of Chemical Industry     

Optimization by random search with jumps

We give a random optimization (RO) algorithm to optimize a real‐valued function of n real variables. During the optimization process, interpolation points are examined to follow valleys, and jumps to new starting points are executed to avoid numerous iterations in local minima. Convergence with probability one to the global minimum of a function is proved. The proposed RO method is a simple, derivative‐free and computationally moderate algorithm, with excellent performance compared to other RO methods. Seven functions, which are commonly used to test the performance of optimization methods, are used to evaluate the performance of the RO algorithm given here. Copyright © 2004 John Wiley & Sons, Ltd.     

Ni catalyst promotion of a Cis-selective Pd catalyst for canola oil hydrogenation

A Ni catalyst was added to a cis-selective Pd catalyst in an attempt to further improve the Pd catalyst's cis-selectivity and activity for canola oil hydrogenation. The system was tested under reaction conditions known to be suitable for cis-selective hydrogenation with the Pd catalyst (50 ppm Pd, 70 °C, and 5.2 MPa). Although inactive on its own under these conditions, the addition of 100 ppm Ni increased the hydrogenation activity (from 2.12 to 2.49 10⁻² min⁻¹). Further addition of Ni up to 1000 ppm resulted in no further improvements in activity. The trans isomer contents of the oils hydrogenated with Pd and the Pd/Ni systems were similar. The level of conjugated dienes decreased rapidly during hydrogenation with both Pd alone and with the Pd/Ni combination and no changes in conjugation were detected in the presence of the Ni catalyst alone. The increased activity of the Pd/Ni system over Pd alone was attributed to adsorption of catalyst poisons from the oil by Ni.