8098单片机在单相调压器中的应用

将8098单片机所特有的用软件来实现A/D,D/A及PWM信号输出的特性应用在模拟式移相电路中,展示了模拟式移相电路改造成具有智能化特点的一条有效途径。     

Business programmes and information systems methodologies

Abstract. An Information Systems Methodology is usually presented as a sequential set of tasks — planning, analysis, design and construction — resulting in a new business application. This classical 'forward-engineering' approach must be adapted to changing business needs — business process redesign, quality management, process and systems templates, advanced technologies, application packages, the reuse of existing information systems resources, and rapid delivery cycles. Using the most general concept of a Business Programme, this paper describes a methodological approach incorporating these modern themes that is qualitatively and quantitatively different from the classical model. It provides a framework for the integration of otherwise independent methodologies, and shows how an entire programme can be formulated, planned and executed. An example is provided, and the approach is justified.     

声表面波32位MSK抽头延迟线

介绍了扩频通信有效的ＭＳＫ信号特点及声表面波ＭＳＫ抽头延迟线构成方式，给出了声表面波３２位ＭＳＫ抽头延迟线的实验结果。     

一种新型润滑油添加剂的质谱研究

采用独特的分离方法和途径，综合使用多种质谱分析技术，如电子轰击谱（ＥＩ／ＭＳ）、场解吸谱（ＦＤ／ＭＳ）、快速原子轰击谱（ＦＡＢ／ＭＳ）、色／质联用等，对高档齿轮油的主剂－含磷极压剂的结构组成进行了较为详尽的分析研究，提出了复酯胺盐的结构组成。     

From product-oriented to process-oriented: Emerging new engineering paradigm

The conventional approach has put emphasis upon reducing labour, and increasing efficiency and uniformity. But this holds good only in the mass production paradigm. As we are entering the age of small production with far wider varieties, these principles of yesterday should be re-examined. Labour itself sometimes gives satisfaction if it involves the joy of creation, and longer time does not necessarily mean just patience, it sometimes turns into expectation if greater joy will be provided later. Too much fitness for the purpose sometimes means lack of robustness and adaptability to the quickly and widely changing environment. Thus, we should reconsider the items we thought important in the mass production age to aptly cope with the diversification of each customer’s requirements.     

Partial scan design and test sequence generation based on reduced scan shift method

This paper presents a partial scan algorithm, calledPARES (PartialscanAlgorithm based onREduced Scan shift), for designing partial scan circuits. PARES is based on the reduced scan shift that has been previously proposed for generating short test sequences for full scan circuits. In the reduced scan shift method, one determines proch FFs must be controlled and observed for each test vector. According to the results of similar analysis, PARES selects these FFs that must be controlled or observed for a large number of test vectors, as scanned FFs. Short test sequences are generated by reducing scan shift operations using a static test compaction method. To minimize the loss of fault coverage, the order of test vectors is so determined that the unscanned FFs are in the state required by the next test vector. If there are any faults undetected yet by a test sequence derived from the test vectors, then PARES uses a sequential circuit test generator to detect the faults. Experimental results for ISCAS'89 benchmark circuits are given to demonstrate the effectiveness of PARES.     

128kb／s电视电话系统中数码率缓存器的控制策略研究

本文探讨了电视电话／会议电视的Ｈ，２６１建议中低码率时（ｐ＝２）数码率缓存器的控制问题，提出一种既有宏观预分配又有微观分割的控制策略（简称ＧＡＬＳ），并用测试图像序列进行了计算机模拟。将本文方法与ＲＭ８中有关策略作了比较，实验结果表明图像的主观质量有所改善。     

Two-level optimal output feedback stabilizer design

The paper addresses the design of two-level power system stabilizers using an optimal reduced order model whose state variables are torque angles and speeds. The reduced order model retains their physical meaning and is used to design a two-level linear feedback controller that takes into account the realities and constraints of electrical power systems. The two-level control strategy is used, and a global control signal is generated from the output variables to minimize the effect of interactions. The effectiveness of this controller is evaluated and a multimachine system is given as an example to illustrate the advantages of the proposed method. Responses of the system with a two-level scheme and an optimal reduced order scheme are included for comparative analysis.     

钛对耐硫变换催化剂性能的影响

利用常压微反色谱、程序升温还原（ＴＰＲ）等技术研究了钛对耐硫变换催化剂性能的影响，结果表明：（１）钛能明显提高耐硫变换催化剂的活性，尤其是在低于６２３Ｋ时活性提高最为明显；（２）工业侧流试验后，含钛样品的保留活性及活性保留率均高于Ｋ８－１１；（３）催化剂中添加助剂ＴｉＯ２后，能显著提高对原料气中Ｈ２Ｓ含量变化的适应能力，因此可以拓宽对原料气的选择范围，对工业生产有着十分重要的现实意义。     

航空齿轮表面硬化层断裂性能研究

按照航空齿轮的具体工艺过程，对材料12Cr2Ni4A的拉伸试样和断裂试样进行设计和加工，通过三点弯曲实验，重点研究了齿轮材料硬化层的硬度分布，硬化试样拉伸力学性能参数和断裂性能参数，实验结果表明，所采用试样的加工工艺方案是可行的，所获得的Kc基本反映我国航空硬化齿轮材料的断裂性能特征，为定量预测航空硬化齿轮疲劳寿命提供实验和理论分析的依据。