自升式平台深水化改造的新模式及其可行性分析

针对我国现有自升式平台存在的不能满足深水域勘探开发的要求以及造价过高等问题,提出一种自升式平台深水化改造新模式——分体坐底自升式平台,在基本不改变原有平台结构的基础上,通过增加可沉浮平台下体,使作业水深增加50m以上,而造价比同工作水深的常规自升式平台低得多。文章介绍了该分体坐底自升式平台的结构方案、作业工况及操作程序,分析了该平台的技术可行性和经济可行性,并提出了深入研究和具体实施需要解决的问题。     

柴达木盆地断裂上下盘油气差异聚集效应与成因

断裂沟通含油气盆地不同层位、不同时代的烃源岩和生储盖组合，成为连接烃源岩和各种圈阔的重要渠道，导致了多种类型的与断裂有关的油气藏的形成。柴达木盆地的断裂控烃特征明显，断裂上下盘油气差异聚集现象十分普遍，不同构造系统区具有不同的油气差异聚集机理和模式。其根本原因是断裂上下盘具有不同的地质特征和油气运聚成藏条件，它们往往是互为消长的关系。油气是富集在断裂的上盘，还是聚集在断裂的下盘，取决于具体的地质条件。     

BT项目实施模式分析

根据实践中出现的各种BT项目管理模式，归纳出了具有代表性的“施工二次招标型BT模式，直接施工型BT模式，施工同体型BT模式，带资承包型BT模式”四种BT项目管理模式，并根据现行法律法规对其适用性和实施中应注意的问题进行了论述。     

Displacement Discontinuity Method for Fracture Mechanics Analysis of Reissner Plates: Static and Dynamic

This paper is concerned with the displacement discontinuity method applied to the shear deformable plates (Reissner’s and Mindlin’s theories) with cracks subjected to static and dynamic loads. Fundamental solutions of dislocation are derived using the Fourier transform method and the Laplace transformation technique. Boundary integral equations are presented in terms of rotations/displacement on the crack surfaces. The Chebyshev polynomials of the second kind are used to evaluate the integral equations with hypersingular kernels on the crack boundaries and determine the stress intensity factors at the crack tips. Comparisons are made with other numerical solutions to demonstrate the proposed method is accurate both for static and dynamic problems.     

On-line mass spectrometry system for measurements at single-crystal electrodes in hanging meniscus configuration

We present the construction and some first applications of an On-line electrochemical mass spectrometry system for detecting volatile products formed during electrochemical reactions at a single-crystal electrode in hanging meniscus configuration. The system is based on a small inlet tip made of porous Teflon and a Peek holder, which is brought in close proximity (ca. 10–20 μm) to the electrode surface. The tip is connected to the mass spectrometer by glass and metal tubing. Because of the small amount of gas entering the mass spectrometer, no differential pumping is needed during the measurement. The tip construction and preparation introduced here leads to reproducible voltammetry with very good cleanliness characteristics. The presence of the tip has no significant influence on the blank voltammetry of a Pt(111) in sulfuric acid, and on voltammetric responses for CO adlayer oxidation, methanol oxidation, and hydroxylamine electrochemistry on Pt(111). The formation of gaseous products in these reactions can be followed accurately and is in good agreement with earlier results obtained by other mass spectrometric or spectroscopic techniques. The time response and tailing of the setup is on the order of seconds and mainly determined by the distance between the tip and the electrode.     

公伯峡水电站高压电缆设计几个技术问题分析

结合公伯峡水电站电缆系统设计，对合理选择电缆截面、敷设方式及保护措施等技术问题加以介绍。由于目前电缆设计标准不太完善，因此设计中应结合电站具体情况，合理地选择和提出技术要求。     

基于CDBA的电流模式多功能滤波器

文章提出了一种由电流差分缓冲放大器（CDBA）实现的两种电流模式多功能双二次滤波器，该滤波器具有可实现多种滤波功能、能独立地调节ω0和Q、灵敏度较低等特点。     

非理想截面脊形介质光波导导波模式的研究

提出了一种求解任意截面形状脊形光波导的方法，先利用有效折射率的概念解出某种截面形状脊形光波导的等效折射率，再利用转移矩阵的理论求解出波导的模式色散方程。     

透射型定时探测器

本文介绍了由微道板构成的透射型定时探测器,得到的飞行时间系统的时间分辨为280ps。并对进一步改善时间特性作了讨论。     

从引进610ERW机组透视东西方技术价值观念的差异

我国引进的610ERW机组大多来自欧美和日本等国,其工艺参数和设备结构有所不同,例如成型机、高频焊机、中频正火装置、连续与非连续生产方式、全线设备(入口段、成形段和精整段)组成的匹配模式以及设备国产化的程度等.通过对东西方有关高频电阻焊技术价值观念差异的分析,总结我国引进610ERW机组的经验,为今后企业引进、消化引进和技术创新提供参考.