计及PMU的混合非线性状态估计新方法

提出一种将同步相量测量单元（PMU）的直接电压相量量测变换为间接支路电流量测，并与监控与数据采集（SCADA）量测量一起进行混合迭代的非线性状态估计方法。对构造等效电流修正量而带来的间接量测误差进行了详细和定量的分析，并对该混合估计算法的精度进行了定性分析和定量计算。理论分析和算例表明，该方法可以获得较高的估计精度，在收敛次数和滤波效果上也有所改进。     

The Effect of Polymer Optoelectronic Properties on the Performance of Multilayer Hybrid Polymer/TiO2 Solar Cells

We report a study of the effects of polymer optoelectronic properties on the performance of photovoltaic devices consisting of nanocrystalline TiO₂ and a conjugated polymer. Three different poly(2‐methoxy‐5‐(2′‐ethylhexoxy)‐1,4‐phenylenevinylene) (MEH‐PPV)‐based polymers and a fluorene–bithiophene copolymer are compared. We use photoluminescence quenching, time‐of‐flight mobility measurements, and optical spectroscopy to characterize the exciton‐transport, charge‐transport, and light‐harvesting properties, respectively, of the polymers, and correlate these material properties with photovoltaic‐device performance. We find that photocurrent is primarily limited by the photogeneration rate and by the quality of the interfaces, rather than by hole transport in the polymer. We have also studied the photovoltaic performance of these TiO₂/polymer devices as a function of the fabrication route and device design. Including a dip‐coating step before spin‐coating the polymer leads to excellent polymer penetration into highly structured TiO₂ networks, as was confirmed through transient optical measurements of the photoinduced charge‐transfer yield and recombination kinetics. Device performance is further improved for all material combinations studied, by introducing a layer of poly(ethylene dioxythiophene) (PEDOT) doped with poly(styrene sulfonic acid) (PSS) under the top contact. Optimized devices incorporating the additional dip‐coated and PEDOT:PSS layers produced a short‐circuit current density of about 1 mA cm^–2, a fill factor of 0.50, and an open‐circuit voltage of 0.86 V under simulated AM 1.5 illumination (100 mW cm^–2, 1 sun). The corresponding power conversion efficiency under 1 sun was ≥ 0.4 %.     

混合集成型光学拾音器的设计与制作

通过混合集成型结构光学拾音器的光学设计和芯片设计，制作了包含微光学棱镜，光电探测器和信号放大电路的混合集成型光学拾音器。经过测试，发现有较好的信号输出特性，表明混合集成型光学拾音器已基本研制成功。     

我国有线电视事业的现状和发展

本文详细系统地介绍了我国有线是视发展历史和现状，及其经营和管理方法。重点介绍了北美的ＣＡＴＶ技术发展动向。最后，指出我国ＣＡＴＶ事业发展中的应用重视的问题。     

FAFFA加速的PO-MM研究复杂金属载体上线天线电磁特性

本文提出了一种快速远场近似(FAFFA)加速的混合物理光学矩量法(POMM),利用FAFFA加速计算矩阵方程中的矩阵矢量积,明显提高了计算效率.对物体表面上的远场组之间的耦合作用推导出了一组简洁的计算公式,并分析了计算复杂度.复杂金属组合体上线天线输入导纳、互导纳和方向性图的计算结果与文献结果一致.利用该方法分析计算了一个舰船模型上线天线的电磁特性.数值结果表明了这种方法的正确性和工程应用中的有效性.     

Experiences with a parallel algorithm for data flow analysis

We have designed a family of parallel data flow analysis algorithms for execution on distributed-memory MIMD machines, based on general-purpose, hybrid algorithms for data flow analysis [Marlowe and Ryder 1990]. We exploit a natural partitioning of the hybrid algorithms and explore a static mapping, dynamic scheduling strategy. Alternative mapping-scheduling choices and refinements of the flow graph condensation used are discussed. Our parallel hybrid algorithm family is illustrated on Reaching Definitions, although parallel algorithms also exist for many interprocedural (e.g., Aliasing) and intraprocedural (e.g., Available Expressions) problems [Marlowe 1989]. We have implemented the parallel hybrid algorithm for Reaching Definitions on an Intel iPSC/2. Our empirical results suggest the practicality of parallel hybrid algorithms.An earlier version of this paper was presented at Supercomputing '90.The research reported here was supported, in part, by the New Jersey Commission on Science and Technology and the CAIP Center's Industrial Members, by Siemens Research Corporation and by National Science Foundation grant CCR-8920078.     

基于混合遗传算法的树状注水管网拓扑优化

以投资最小为目标函数,以井间隶属关系的惟一性、连接注水井数量等限制为约束条件,建立了树状注水管网拓扑优化数学模型.根据模型特点,将优化问题分为分配层和几何层,分别采用遗传算法和非线性优化方法进行求解.并对遗传算法的操作过程进行了改进,调整了适应函数,采用随机多父辈适应函数值加权交叉和多种变异操作,结合了模拟退火算法,并给出了初温的确定方法,改进了选择复制操作,从而形成了混合遗传算法.该算法能够有效地提高收敛速度,避免早熟收敛.利用算例说明了该方法的有效性.     

Sol-gel preparation of a di-ureasil electrolyte doped with lithium perchlorate

Solid polymer electrolytes (SPEs) synthesized by the sol-gel process and designated as di-ureasils have been prepared through the incorporation of lithium perchlorate, LiClO₄, into the d-U(2000) organic-inorganic hybrid network. Electrolytes with lithium salt compositions of n (where n indicates the number of oxyethylene units per Li⁺ ion) between ∞ and 0.5 were characterized by conductivity measurements, cyclic voltammetry at a gold microelectrode, thermal analysis and Fourier transform Raman (FT-Raman) spectroscopy. The conductivity results obtained suggest that this system offers a quite significant improvement over previously characterized analogues doped with lithium triflate [S.C. Nunes, V. de Zea Bermudez, D. Ostrovskii, M.M. Silva, S. Barros, M.J. Smith, R.A. Sá Ferreira, L.D. Carlos, J. Rocha, E. Morales, J. Electrochem. Soc. 152 (2) (2005), A429]. “Free” perchlorate ions, detected in all the samples examined, are identified as the main charge carriers in the sample that yields the highest room temperature conductivity (n = 20). In the di-ureasils with n ≤ 10 ionic association is favoured and the ionic conductivity drops.     

基于旋量和臂形标志的机器人运动学逆解计算

讨论了用旋量和指数积公式计算PUMA类型6自由度机器人运动学逆解的方法。在子问题的计算过程中，通过引入臂形标志来选取关节变量的合理解，以得到运动学逆解的唯一解。这种方法避免了对无效解的计算，可以减少计算量，提高计算效率。通过一个实验机器人的运动学逆解计算验证了算法的有效性。     

机械手工作空间分析

研究平面双杆、三杆及漂浮基座机械手工作空间。得到使工作空间最大的优化条件，在三杆机械手的讨论中运用了Lagrange条件极值法。所得结果对机械手设计分析具有一定的指导意义，文章附有计算图线。