MITI projects on recycling

MITI has actively done R&D on industrial technology for waste and reclamation and so there are many research items from small scale to large scale. However, Ecofactory and researches on recycling of metallic materials are introduced here. Ecofactory was proposed by the Mechanical Engineering Laboratory and is now at the stage of the Leading Research, a new research scheme in AISt. Researches on recycling of metallic materials are being done with subsidy. Those researches should contribute to both the preservatin of the global environment and effective recycling of waste materials.Abbreviations AIST Agency of Industrial Science and Technology - MITI Ministry of International Trade and Industry - NEDO New Energy and Industrial Technology Development Organization     

油气勘探开发投资绩效评价的指标选择探讨

从油气勘探、开发投资的特性出发,正确选择投资绩效评价指标,是保证评价科学性以及进行中外对比研究的前提条件。     

箱包风格设计及其发展趋势(Ⅰ)

本文主要讨论现代箱包设计的风格定位及其流行趋势。     

An Evaluation of Public Concerns About Water Management in the Palestinian Territory Pre,During, and Post the National Uprising

We have evaluated the extent of public concerns about water management in the Palestinian Territory (PT) through a survey of the main Palestinian newspaper over the last thirteen years divided in three periods: pre (1984–1987), during (1988–1991), and post national uprising period (1992–1996). The public concern in the PT about various water management aspects was clear and influenced by the prevailing political conditions indicating (1) poor concerns in the first and second period where full Israeli military control of the PT and harsh practices prevailed with relatively more emphasis on regional water issues and (2) extensive-strong concerns in the third period when the peace process started and a partial lift of some of the Israeli water practices took place, along with an increased freedom in expressing public concerns which was granted with more emphasis on local issues and problems. Lack and limitation of water available to Palestinians, alternative solutions, and water quality and pollution control constituted the overwhelming majority of the topics of concern to the public for the three periods studied. Palestinian concerns were always greater than regional ones for the three periods and all of the topics considered. Public concern in the PT about all other water management aspects was poor and negligible especially in the first two periods. A massive increase in public concern has been observed in the third period in which the public expressed their concern over most water management aspects, indicating a possible change in public attitude toward water and water management and reflecting the change of the political status by the start of the peace process and the signing of the peace agreements.     

抓财务管理促工程建设--三峡一期工程财务管理回顾

财务管理是现代化企业管理的重要组成部分，也是三峡工程管理的重要内容。三峡工程在财务管理上提出了“两个适应”、“三个转变”、“四个树立”的指导思想和理顺财务关系，为搞好财务管理奠定了基础。三峡工程筹集资金是财务部门的首要任务，通过三峡建设基金（增收电费）、落实国家开发银行贷款、发行企业债券和利用外汇储备贷款，形成了以三峡建设基金和国家开发银行贷款为主渠道的资金来源。在财务管理中规范管理行为、提高人员素质、加强电算化管理和会计监督工作是十分重要的。     

Finite elements in the analysis of pressure vessels and piping-a bibliography (1976–1996)

The paper gives a bibliographical review of the finite element methods (FEMs) applied for the analysis of pressure vessel structures/components and piping from the theoretical as well as practical points of view. The range of applications of FEMs in this area is wide and cannot be presented in a single paper; therefore the aim of this review is to give the reader an encyclopaedic view of the differnt possibilities that exist today for the finite element analysis in the fields of pressure vessels and piping. The bibliography at the end of the paper contains approximately 1900 references to papers, conference proceedings and theses/dissertations on the subject that were published in 1976–1996. These are classified in the following categories: linear and non-linear, static and dynamic, stress and deflection analysis; stability problems; thermal problems; fracture mechanics problems; contact problems; fluid-structure interaction problems; manufacturing of pipes and tubes; welded pipes and pressure vessel components; development of special finite elements for pressure vessels and pipes; finite element software; and other topics. Also finite element software, general purpose and special purpose codes, used for the analysis of pressure vessels and pipes are briefly discussed and presented.     

Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: A critical review

The primary purpose of this work is to review the literature about what is and is not known about using ethylene vinyl acetate (EVA0 copolymer as the encapsulant (or pottant) material in photovoltaic (PV) modules. Secondary purposes include elucidating the complexity of the encapsulation problem, providing an overview about encapsulation of PV cells and modules, providing a historical overview of the relevant research and development on EVA, summarizing performance losses reported for PV systems deployed since ca. 1981, and summarizing the general problems of polymer stability in a solar environment. We also provide a critical review of aspects of reported work for cases that we believe are important.Failure modes resolved in the early work to establish reliability of deployed modules and the purposes and properties of pottants, are summarized. Typical performance losses in large field-deployed, large-scale systems ranging from 1% to 10% per year are given quantitatively, and qualitative reports of EVA discoloration are summarized with respect to ultraviolet (UV), world-wide location and site dependence.The general stability of polymers and their desirable bulk properties for solar utilization are given. The stabilization formulation for EVA, its effectiveness, and changes in it during degradation are discussed. The degradation mechanisms for the base resin, e.g., unstabilized Elvax 150^TM, and stabilized EVA are indicated for literature dating to the early 1950s, and the role played by unsaturated chromophores is indicated. The limited number of studies relating discoloration and PV cell efficiency are summarized.Observed degradation of EVA or the unstabilized base resin in the laboratory and examples used to measure the degradation are summarized in sections entitled: (1) thermally-induced degradation; (2) photodegradation and photothermal degradation of EVA in different temperature regimes; (3) photobleaching and photodegradation of the UV absorber and cross-linking agent; (4) acetic acid and metal and metal-oxide catalyzed oxidative degradation; and (5) discolaration and PV cell efficiency losses.Processing effects/influences on EVA stability are discussed in sections entitled: (1) EVA raw materials and extruded, uncured films; (2) thermal encapsulation processes; (3) effects of lamination, curing, and curing peroxide on gel content and chromophores formed; and (4) incomplete shielding of curing-generated chromophores. A summary is given for the limited number of accelerated lifetime testing efforts and examples of erroneous service lifetime predictions for EVA are discussed. The known factors that effect the discoloration rate of several EVA formulations are discussed in which the reduction in rate by using UV-absorbing superstrates is a prime example. A summary is given of what is and is not known about EVA degradation mechanisms, degradation from exposures in field-deployed modeules and/or laboratory testing, and factors that contribute to EVA stability or degradation. Finally, conclusions about using Elvax 150 in EVA formulations are summarized, and future prospects for developing the next-generation pottant for encapsulating PV modules are discussed.     

恒运电厂5号机抽汽供热改造

介绍半高压单缸凝汽式汽轮机改造为抽汽拱热式组的设计思路及施工改造过程，对改造中出现的新问题进行了分析并提出解决办法，改造后，机组抽气直接供给热网，社会效益和经济效益明显。     

北京火车站抗震鉴定与加固技术

北京火车站是首都重要的标志性建筑之一 ,195 9年建成 ,当时按 7度设防考虑 ,存在着许多不符合抗震要求的问题 ,一些设施也明显不能满足现代使用功能要求。北京火车站抗震加固与改造设计项目组 ,运用多种先进的加固手段 ,在保持原建筑外貌不变的前提下 ,实现了抗震能力和改善使用功能的协调 ,取得了大型公共建筑加固改造的新经验     

Thermomechanical stress fields in high-temperature fibrous composites. I: Unidirectional laminates

This two-part paper presents a closed-form procedure for evaluation of estimates of local thermomechanical stress fields in two-phase fibrous composites and laminates. The first part is concerned with a unidirectional elastic laminate subjected to uniform mechanical loads and to uniform changes in temperature. Both phases are assumed to be elastic, with temperature-dependent moduli and expansion coefficients; the solution reflects the influence of thermomechanical interactions. Exact solutions are not possible for any real system, because the local geometry is not known in detail. Instead, estimates of the fields are found from a modified Mori-Tanaka approximation. Examples are presented for two SiC/Ti---Al---Nb composites. Local stresses of interest are found after cooling from fabrication to room temperature. The presence of local yielding, and the influence of coupling terms on the local stress magnitudes are examined. Extension of the results to laminated plates is presented in Part II (Dvorak, G.J., Chen, T. & Teply, J., Composites Science and Technology, 43 (1992) 359–368, this issue).