金刚石薄膜中晶粒尺寸的研究

扫描电子显微研究表明，化学汽相沉积的金刚石薄膜中晶粒大小比较均匀。但随着沉积时间和薄膜厚度的增加，晶粒逐渐变大，且每一层内，存在少量的大金刚石颗粒，讨论了晶粒尺寸变化和大晶粒形成的原因和机制。     

一个有效的圆片规模布局算法

本文提出了一个圆片规模布局算法，它是国外一个相应算法的改进形式，区别在于利用力定向布局法的方式不同。在相对位置阶段，该算法利用布局的层次特性将需确定所有电路元件相对位置的问题缩减至仅需确定宏电路元件相对位置的问题；在实际位置阶段，采用分治策略和取消前阶段层次划分的方式回避了需确定任意元实际位置的问题．其时间复杂度远低于国外相应算法．     

On the Yustova threshold plates

A response to criticism of threshold plates for the study of color vision developed at the Mendeleev All-Russia Research Institute of Metrology and published in 1994 is presented. The critics base their conclusions on colorimetric testing and the examination of the plates. In response to the article by M. V. Danilova and J. D. Mollon [4]. __________ Translated from Izmeritel’naya Tekhnika, No. 1, pp. 37–39, January, 2007.     

An efficient assumed strain element model with six DOF per node for geometrically non-linear shells

The present paper describes an assumed strain finite element model with six degrees of freedom per node designed for geometrically non-linear shell analysis. An important feature of the present paper is the discussion on the spurious kinematic modes and the assumed strain field in the geometrically non-linear setting. The kinematics of deformation is described by using vector components in contrast to the conventional formulation which requires the use of trigonometric functions of rotational angles. Accordingly, converged solutions can be obtained for load or displacement increments that are much larger than possible with the conventional formulation with rotational angles. In addition, a detailed study of the spurious kinematic modes and the choice of assumed strain field reveals that the same assumed strain field can be used for both geometrically linear and non-linear cases to alleviate element locking while maintaining kinematic stability. It is strongly recommended that the element models, described in the present paper, be used instead of the conventional shell element models that employ rotational angles.     

SJT-B助剂/表面活性剂/聚合物三元复合体系的黏度和界面张力研究

助剂SJT-B是10%的磷硅酸盐胶体溶液,含有Na^＋和K^＋、SiO3^2-和PO4^3-等离子,在活化状态下一部分SiO3^2-和PO4^3-生成具5个负电荷的聚磷硅酸根链状阴离子,后者可结合Ca^2＋、Mg^2＋而形成纳米磷硅酸盐胶态粒子,避免结垢并防止金属腐蚀。以助剂SJT-B代替NaOH,用大庆油田回注污水配制SJT-B/烷基苯磺酸盐/聚合物三元复合溶液,取SJT-B浓度为1.0-8.0 g/kg,石油磺酸盐浓度为0.5-4.0 g/kg,聚合物浓度为1.2 g/kg,按排列组合法得到25个实验配方。对照NaOH/石油磺酸盐/聚合物溶液组成为12/3.0/1.2 g/kg,初配黏度（45℃,7.34s^-1）27.3 mPa·s,界面张力（45℃）3.20×10^-3mN/m。初配各实验配方溶液黏度31.2-44.8 mPa·s,45℃老化30天后黏度降低率2.71%-36.97%;初始界面张力最低值1.13×10^-3mN/m,最高值4.34×10^-2mN/m,在界面活性图上,10^-3mN/m超低界面张力区出现在高SJT-B和烷基苯磺酸盐区,老化后该区扩大。筛选出的SJT-B/石油磺酸盐/聚合物体系组成为4.0/3.0/1.2 g/kg,其初始黏度为37.1 mPa·s,老化后黏度降低3.77%,初始界面张力1.79×10^-2mN/m。图2表3参8。     

地表水和地下水相互作用及集成模型研究

本文在总结国内外地表水和地下水相互作用研究的热点问题的基础上，归纳了定量计算的基本方法，评述了国内外主要的集成模型并对其进行了分类；认为集成模型应该解决时空尺度整合、参数的不确定性等关键问题，指出综合水循环各组成部分的复杂系统模型是模型发展的必然趋势。     

纵向零序电压保护新方案及其应用

由于结构设计的原因，综合性能较好的一些保护方案如横差保护和不完全纵差保护等将不能应用于大型超临界汽轮发电机。文中重点讨论了纵向零序电压保护方案的改进及其在应用中的问题。研究表明，发电机发生匝间短路故障时3次谐波电势减小，而机组外部故障时发电机3次谐波电势增大。因此，为了提高纵向零序电压保护方案的性能，可以根据故障时3次谐波电压增量的特性作为选取制动量的依据，从而提高保护性能。亦即:当3次谐波电压表现为负增量时，制动量取为0或接近0;而当3次谐波电压表现为正增量时，以该增量值作为制动量。此外，对匝间保护纵向零序电压元件增加一个小延时是可行的，它可以提高保护躲暂态3次谐波影响的能力。仿真计算表明，比例制动式纵向零序电压保护能可靠区分内外部故障，符合大型超临界汽轮发电机的保护要求。     

Quantity,controls and functions of large woody debris in Midwestern USA streams

Large woody debris (LWD) can increase stream habitat heterogeneity by providing structure, altering flow patterns, enhancing sediment deposition, forming pools and retaining organic matter. In North America, the role of LWD has been studied extensively in streams of mature forests (e.g. Pacific Northwest), but few studies have assessed LWD in streams of younger forests (e.g. Midwestern USA). Our objectives were to: (1) quantify the volume and abundance of LWD in a set of Midwestern streams; (2) evaluate possible factors influencing LWD quantity; (3) identify the functional roles of LWD; and (4) compare LWD levels in the upper Midwest to those elsewhere in North America. In 2002 and 2003, we measured LWD and geomorphological variables in 15 low‐gradient streams draining previously logged watersheds in the Upper Peninsula of Michigan. Mean (±SE) LWD volume (0.77 ± 0.12 m³ 100 m⁻²) and abundance (33 ± 3 pieces 100 m⁻¹) were 71% and 10% lesser, respectively, than in streams of similar gradient elsewhere in North America. Channel shape (width:depth ratio) explained 30% of the variation in LWD volume (multiple stepwise regression, P = 0.015) while LWD length and length:channel width combined, explained 72% of the variation in LWD density (multiple stepwise regression, P < 0.0001). About 50% of the LWD either stored sediment or stabilized banks and 14% of the LWD formed pools, although pool density was not significantly related to LWD volume or density. LWD levels, overall, were low in upper Midwestern streams, but the relative importance of that LWD to ecosystem function may be magnified in these wood‐poor systems. Copyright © 2006 John Wiley & Sons, Ltd.     

XC型车号自动识别系统在轨道衡的应用

介绍了XC型车号自动识别系统的工作原理及在轨道衡的应用,解决了长期以来轨道衡路用车车号和自重依靠人工抄录易出错及劳动强度大的问题。     

轴流泵不稳定流场的压力脉动特性研究

流场压力脉动是影响大型轴流泵运行稳定性的关键因素,本文采用时间相关的瞬态流分析理论及大涡模拟方法研究轴流泵内部非定常流动,得到了不同工况下泵内水压力脉动结果。通过与实测扬程和功率对比,证明本文所提出的方法可较准确地反映泵的流动特征。研究表明,轴流泵内最大压力脉动发生在叶轮进口前,压力脉动频率主要受叶轮转频控制;在叶轮进口与出口处,从轮毂到轮缘压力脉动逐渐增大,而在导叶中间及导叶出口处,结果正好相反。偏离最优工况越远,脉动的相对振幅越大,在60%流量工况下泵内压力脉动约为最优工况的2倍。