New inverse method for identification of constitutive parameters

A new inverse method by coupling iSIGHT and ABAQUS was proposed to determine the constitutive parameters of Al2O3sf/LY12 composite deforming at elevated temperature. It combined the merits of the f＇mite element simulation and optimization technique. The direct model was simulated with finite element code ABAQUS. The inverse problem associated with the identification of the constitutive parameters was expressed as a least square optimization problem. The direct simulation and the parameters optimization were implemented in iSIGHT integrated environment. The aim was to match the output of the direct simulation with the experiment data. The capability of the proposed inverse method was demonstrated through the identification of constitutive parameters of Al2O3sf/LY12 composite. The proposed new inverse method is also applicable to other parameters identification which is hardly determined through experiments or direct analytical method.     

基于LM算法的宽板V型自由弯曲参数的实时识别

在弯曲成形智能化控制过程的4个要素中，材料性能参数的实时识别占有极其重要的地位。为提高实时识别的精度和效率，根据宽板V型自由弯曲成形的特点，建立了宽板V型自由弯曲成形智能化控制过程材料性能参数实时识别的LM神经网络模型。训练结果表明，与改进的BP网络模型比较，LM网络模型的收敛精度和收敛速度均有明显的提高，为实现弯曲成形过程的智能化控制奠定了基础。     

弹簧表层优化喷丸残余应力场的工程计算方法

以往多是依靠疲劳试验或经验来选择弹簧的喷丸强化工艺参数，这种传统作法不仅人力和物力耗费大，而且所确定的工艺参数也不一定具有最佳的强化效果。依据作者提出的并已获得试验验证的“内部疲劳极限理论”，提出一种通过工程计算获得达到预先规定疲劳强度应具备的“优化残余应力场”。这样便有可能把喷丸强化工艺技术在制造业中的应用由以往单纯依靠试验和经验而步入到以工程计算为基础与少量典型试验相结合的更科学的途径。     

活性石灰/粉煤灰制备烧结烟气脱硫剂配比试验研究

本文研究了以钢铁企业常用物料活性石灰和自备电厂粉煤灰制备的脱硫剂,在循环流化床脱硫试验装置上进行了烧结烟气脱硫剂配比试验.试验结果表明,活性石灰与粉煤灰的质量比按1:2配置时,脱硫剂钙的利用率较高,具有较好的经济性.     

助卷辊电液伺服系统相关辨识法研究

用相关辨识法分析了卷取机助卷辊电液伺服系统的频率特性 ,采用 Levy法求出系统的传递函数 ,并且给出该系统频率特性相关参数。     

有滞后环节的系统的闭环鲁棒辨识方法

提出一种新的针对带滞后环节的任意阶系统的闭环辨识方法。通过“三步法”，实现在闭环条件下的被控制对象的传递函数参数的辨识，所提出方法具有很强的鲁棒性。仿真例子表明该方法的有效性。     

Identification of a minor component of the sex pheromone ofLeucoptera malifoliella (Lepidoptera,lyonetiidae)

A new minor component in the female volatile extract ofLeucoptera malifoliella (Costa) (Lepidoptera, Lyonetiidae) has been identified as 5,9-dimethyloctadecane (2). The amount detected of the minor compound2 ranged from 4 to 8% in comparison with the major component 5,9-dimethylheptadecane (1). Neither compound has been found in the male volatile extract. The identification has been based on its spectroscopic properties and Chromatographic behavior in comparison with an authentic synthetic sample. The synthesis has been carried out through a short route from 2,6-dimethylcyclohexanone (3). In field tests, compound2 appears to act as a Synergist of the major component1 when mixed with the latter in a 1000.1– 5 ratio.     

粘胶纤维厂制冷系统压缩热的利用

根据粘胶纤维生产的特点,利用制冷压缩机产生的压缩热优化设计粘胶纤维厂制冷系统。该制冷系统是先将制冷压缩热作为包装箱烘干线的热源进行第一次利用,其加热的软水进行第二次利用。该制冷系统取消了常规设计中的冷却系统设备。结果表明:粘胶纤维厂制冷系统采用这种优化方法,制冷系统压缩热有效利用率达53%,节电12.5%,相当于制冷系统能耗减少60%以上。     

电子陶瓷材料最佳掺杂含量的理论研究

分析多种电子陶瓷材料的掺杂改性的实验结果，建立陶瓷材料的某一物理性能与晶体结构，烧结温度和掺杂剂含量之间的联系，归纳给出了一个掺杂最佳含量的表达式，应用此表达式定量计算了二氧化硅，三氧化二铝，氧化锌，二氧化锡，钛酸钡等部分电子陶瓷材料的最佳掺杂含量。     

Adaptive receding horizon control for constrained MIMO systems

An adaptive control algorithm for open-loop stable, constrained, linear, multiple input multiple output systems is presented. The proposed approach can deal with both input and output constraints, as well as measurement noise and output disturbances. The adaptive controller consists of an iterative set membership identification algorithm, that provides a set of candidate plant models at each time step, and a model predictive controller, that enforces input and output constraints for all the plants inside the model set. The algorithm relies only on the solution of standard convex optimization problems that are guaranteed to be recursively feasible. The experimental results obtained by applying the proposed controller to a quad-tank testbed are presented.