磷氮阻燃腈纶结构性能及阻燃机理研究

研究了含磷酸二氢铵和脲复合阻燃剂的共混阻燃腈纶的结构和性能。研究表明，在纤维成形加工过程中，部分阻燃剂聚合生成聚磷酸铵和聚脲，阻燃剂以微粒状均匀分散并包埋在纤维内部；阻燃剂的加入使纤维高序区大分子间等距离排列的规整性和片状结构单元等距离平行排列的程度降低，热稳定性亦略有下降；但纤维的宏形态结构及物理机械性能没有明显变化；磷氮阻燃腈纶具有良好的阻燃性和阻燃耐久性，经碱洗２０次、水洗３０次后，阻燃剂的磷和氮的保留率分别高达８２．９％和８９．５％，纤维的ＬＯＩ值仍在２６％以上。     

Potassium channels: a computer prediction of structure and selectivity

Model structures for the pore of the potassium channels Shakerand ROMK1 are predicted. The models arise from computer simulationsand suggest reasons for the striking selectivity of these channelsfor K+ and the blocking of ROMK1 by internal Mg²⁺. The modelledstructure of the Shaker pore is supported by mutagenesis data.The mutagenesis experiments indicate the side chains responsiblefor binding to blocking agents [tetraethylammonium (TEA) andcharybdotoxin (CTX)] and the model has these side chains suitablyoriented for binding. An aromatic K+ binding site part way downthe pore is also predicted by the Shaker pore model.     

高层住宅结构设计

主要介绍长沙梦泽园高层住宅从基础到上部楼层各部位的结构设计,以及在设计、施工过程中所考虑的一些问题及处理方法。     

无垫片焊接密封法兰计算方法的讨论

应用华脱尔斯法建立了内、外焊唇焊接法兰结构的力学模型,在相同设计条件和材料状况下,进行了内、外焊唇结构法兰的受力分析、设计计算和结构尺寸对比。笔者认为:如果设计计算成立且焊接条件允许,内焊唇结构的法兰比外焊唇结构的法兰螺栓载荷减小,截面积减少,法兰直径和厚度也相应大幅降低。     

Effect of coumarin and xanthotoxin on mitochondrial structure,oxygen uptake,and succinate dehydrogenase activity in onion root cells

At concentrations in which they occur on the plant surface and retard mitosis, coumarin and xanthotoxin lowered uptake of oxygen (by 60 and 30%, respectively) by meristematic cells ofAllium cepa root tips. They caused changes in the structure of the mitochondrial matrix to become dense, and protrusions of mitochondrial membranes were visible parallelling their hypertrophy, indicating alteration in the structure and physiology of these organelles. Coumarin and, to a lesser extent, xanthotoxin increased succinate dehydrogenase production in mitochondria and also in the cytoplasm, indicating changes in membrane permeability. Changes in oxygen uptake and mitochondrial structure, in addition to the retardation of mitosis, may be the reason these compounds act as allelochemicals after they have been removed from the plant surface and reach the root meristem.     

煤的各向电异性与其大分子结构间的关系

从理论和实验两个方面研究了煤的各向电异性与煤大分子结构间的关系。在垂直于煤层面方向上的势垒比平行于煤层面方向的高，这就是煤具有各向电异性的根本原因。煤化程度越高，煤的各向电异性越明显。     

Quantification of secondary structure prediction improvement using multiple alignments

The use of multiple sequence alignments for secondary structurepredictions is analysed. Seven different protein families, containingonly sequences of known structure, were considered to providea range of alignment and prediction conditions. Using alignmentsobtained by spatial superposition of main chain atoms in knowntertiary protein structures allowed a mean of 8% in secondarystructure prediction accuracy, when compared to those obtainedfrom the individual sequences. Substitution of these alignmentsby those determined directly from an automated sequence alignmentalgorithm showed variations in the prediction accuracy whichcorrelated with the quality of the multiple alignments and distanceof the primary sequence. Secondary structure predictions canbe reliably improved using alignments from an automatic alignmentprocedure with a mean increase of 6.87percnt;, giving an overallprediction accuracy of 68.5%, if there is a minimum of 25% sequenceidentity between all sequences in a family.     

不同活化剂对石油焦基活性炭孔结构的影响

以石油焦为原料 ,Na OH,KOH和 Na2 CO3 为活化剂制备活性炭 ,采用氮气吸附考察了不同活化剂对活性炭的比表面积、中孔和微孔孔径分布、孔容积及平均孔径等孔结构的影响 .结果表明 :KOH活化制备的活性炭包含 1 nm的微孔和 4nm的中孔 ,总孔容 0 .648cm3 /g,比表面积大 ;Na OH制备的活性炭以 1 nm的微孔为主 ,占总孔容 ( 0 .1 65 cm3 /g)的 98% ,平均孔径 1 .83nm;Na2 CO3 制备的活性炭以 4nm的中孔为主 ,占总孔容 ( 0 .1 43cm3 /g)的 68.5 % ,平均孔径 3.42 nm,比表面积小 .3种样品的孔径都呈现出多峰分布特征 .KOH和 Na2 CO3 活化制备的活性炭的 N2 吸附脱附曲线属于 型 ,Na OH活化制备的活性炭吸附脱附曲线属于 型 .     

Polymorphism of tricalcium silicate, the major compound of Portland cement clinker: 2. Modelling alite for Rietveld analysis, an industrial challenge

A comprehensive quantification of the various phases of clinkers by X-ray diffraction with a Rietveld-like analysis is an important industrial challenge. Various available structural models are used for the most frequent M1 and M3 polymorphs of alite usually found in industrial clinkers, referred to as M1- or M3-based clinkers. In this paper, the effect of C₃S structural model is investigated. Four models are tested and compared using either synthetic M1 and M3 alites or M1- and M3-based clinkers. The comparison validates the available models for M1 and M3 alites and an average model, given here, derived from our recently proposed M1 structure as a catch-all model when the nature of the clinker is unknown. The latter model is meant to be used for industrial on-line quantification.     

环形截面提升管内颗粒的运动行为

采用PDPA(phase Doppler particle analyzer system)及磷光颗粒示踪技术对环形截面提升管中颗粒的运动行为进行了研究。与传统提升管相比，环形截面提升管中颗粒速度分布的均匀性有所改善，其最高速度与最低速度之差变小。环形截面提升管最大速度值出现在相对径向位置φ=0.3-0．4处。与传统提升管相似，环形截面提升管内颗粒的轴向返混较严重，停留时间分布曲线存在较明显的拖尾，其中颗粒的轴向Peclet数与传统提升管也处于同一数量级范围。提升管床结构的改变并未显著改变其中气固流动的微观相结构，稀相与密相颗粒团微观两相仍然存在，这种微观相结构是造成颗粒严重返混的决定性原因：稀相中的颗粒与密相颗粒团中的颗粒分别造成了颗粒停留时间分布曲线的前峰与拖尾峰。