临南油田夏52块沙三中泥质砂岩油层精细评价

临南油田夏 5 2块沙三中泥质砂岩油层分布广 ,未动用程度高 ,为了稳定产量 ,急需寻找可直接投产的泥质砂岩油层。本文利用相渗实验资料建立油相相对渗透率与含水饱和度关系 ,从而建立有效渗透率的解释模型。依据有效渗透率和有效厚度将泥质砂岩油层划分等级 ,分区评价 ,这不仅有利于合理开采和保护此类油层 ,降低其生产成本 ,也为预测此类油层产能提供依据     

水库水面蒸发量计算方法的研究

根据水库水面蒸发机制，结合前人研究成果，提出一种新的水库水面蒸发量计算模型，利用不同气候区多站资料确定模型参数，并利用全国各地30多个水库漂浮蒸发站实验资料，对模型进行拟合检验与移用检验，结果表明，该模型的适应性很强，有推广前景。对模型特性较深入的分析说明，该模型较过去常用的几种模型有许多更合理之处。     

The rate of corrosion of concrete reinforcement and possibilities of its mathematical modelling

The paper describes a method for the mathematical modelling of steel reinforcement corrosion rate. This method is based exclusively on experimental results and expression of the influence of significant corrosion factors in the form of functional relations. The method takes into account the reality of the effects of corrosion factors, their contigency and complexity, and various circumstances occurring in practice. It represents one way towards the development of methods for the prediction of service life of reinforced concrete and structures.     

Two- or three-stage least squares?

Two elements enter the choice between 2 and 3SLS for full-system estimation: statistical efficiency and computational cost. 2SLS always has the computational edge, but 3SLS can be more efficient, a relative advantage that increases with the strength of the interrelations among the error terms. A measure of these interrelations is thus helpful in making the choice, and, when there are only two equations, this has suggested using a high pairwise error correlation as an indicator of when to use 3SLS. In larger systems of equations, however, these pairwise correlations can remain small even though more general interrelations give 3SLS the relative advantage. More general indicators are therefore needed, and this paper suggests three such and demonstrates their efficacy.Professor of Economics, Boston College, and Principal Research Associate, Center for Computational Research in Economics and Management Science, MIT. All computation was done on the TROLL system at MIT. My thanks go to Josh Charap for his able research assistance. This research was sponsored in part by the National Science Foundation under grant #IST-8420614.     

基于熵权的料场方案模糊多属性优选研究

砂石料场方案选择中存在着许多难以精确度量的模糊性因素，常规的平衡法、系统分析法很难对此进行有效的处理。将模糊数学理论应用于砂石料场的方案选择，提出了熵权与模糊理论相结合的砂石料场方案优选方法，重点对标准化属性矩阵的产生、主客观权重结合得到综合权重及相对接近度的计算等几个方面进行了说明，并通过实例验证了该方法的可行性与实用性。     

用热失重法确定水合粘土水分含量及存在形式

文章以蒙脱土为例，采用热失重法定性定量确定了水合粘土中结合水类型、界限及其相对含量，并与等温吸附法结果进行了对比。结果表明，用该方法得到的水合蒙脱土中各种水分的相对含量及总含水量与等温吸附实验结果相一致。热失重（25~250 ℃）分析结果表明，水合蒙脱土中水分子主要存在自由水、松散吸附结合水、紧密吸附水（强吸附结合水）3种状态，分别对应于25~75 ℃、75~120 ℃、120~230 ℃区间里的失水。从热失重（25~250 ℃）规律来看，仍存在两个明显的转折点p/ps=0.9、0.98，它们为粘土-水体系的两个特征湿度，前者为粘土表面强结合水与松散结合水（渗透结合水）之间的界限，后者为松散结合水与自由水之间的界限，这验证了等温吸附法确定的两个特征湿度及对粘土表面结合水界限划分的正确性。     

The catalytic activity and surface characterization of Ln2B2O7 (Ln=Sm, Eu, Gd and Tb; B=Ti or Zr) with pyrochlore structure as novel CH4 combustion catalyst

Ln₂B₂O₇ (Ln=Sm, Eu, Gd and Tb; B=Zr or Ti) with pyrochlore structure was prepared by sol–gel method for the high-temperature catalytic combustion. The crystal structure of Ln₂B₂O₇ was identified by XRD and their surface area was about 4 m²/g after calcinations at 1200 °C. Catalytic activity of methane combustion was observed for Ln₂Zr₂O₇ series and the best catalyst was Sm₂Zr₂O₇. Its relative reaction rate per unit surface area at 600 °C was 2 cm³/m² min, which was twice higher than that of Mn-substituted Sr hexaaluminate. From surface analysis by XPS, the low binding energy of each Ln element of Ln₂Zr₂O₇ compared to that of Ln₂Ti₂O₇, gave the catalytic activity of methane combustion.     

Estimation of errors of hydrogen standard time scale preservation taking account of systematic frequency changes

Metrological characteristics of active hydrogen frequency standards are investigated on the basis of internal and external comparisons. The stability of random changes and drift of hydrogen frequency standards and also the potential capabilities of time scale preservation with effective consideration of systematic changes in their frequency are demonstrated. __________ Translated from Izmeritel’naya Tekhnika, No. 3. pp. 42–45, March, 2007.     

Instrumental characterization of clay by XRF,XRD and FTIR

Instrumental characterizations of the clay were performed by different techniques such as XRF, XRD and FTIR. XRF shows the chemical compositions of the clay where Al-oxide and silica oxide are present in major quantity whereas XRD confirms the presence of these minerals in clay. FTIR studies show the presence of quartz, alumina, haematite and different mineral matters.     

Electron spectroscopies and their use for materials characterization

We present here a general overview of electron spectroscopies from a practical point of view. The most frequently used ones are described and the type of structural information they can provide on materials is explained in relation to the physical processes on which they are based. Furthermore, we explore critically and in detail various tools that have been developed to allow a systematic solving of structures by these spectroscopies.