Restoration of masonry facades, renders and final coats in a severe climate

The restoration of relatively old masonry buildings, 1870-1920, represents about 119930 flats and offices in the 4-5 largest cities in Norway. Driving rain and a severe climate are the key factors for deterioration. The paper describes a case study at the city campus of the University of Oslo.     

钢筋钢纤维增强部分混凝土梁受剪性能试验研究

本文通过钢筋混凝土梁以及在受拉区部分地加入钢纤维的钢筋混凝土梁的试验及理论分析，研究了钢纤维混凝土层厚、钢纤维体积率和剪跨比对钢筋钢纤维增强部分混凝土梁受剪性能的影响，建立了与普遍钢筋混凝土梁受剪承载力计算公式相衔接的钢筋钢纤维增强部分混凝土梁受剪承载力的计算模型和计算公式．     

沈阳太平洋广场空调冷热源方案比较

对一幢１１．５万ｍ＾２的四星级综合建筑的空调冷热源不同的蓄冷和取冷比较了四种方案，论证了其中直燃型溴化锂吸收式冷热水机组供冷供暖、小型燃油锅炉供蒸汽的方案最为合理。     

用发展的Sachs法研究模拟轧辊中的残余应力

对不同辊型，尺寸，材料与加工处理方法的模拟冷轧辊进行了内剥层试验研究，求出了原辊和打中心孔或扩孔后辊内残余应力分布曲线，提出了虚拟打孔法和虚拟剥层法，解决了实心辊中心和空心辊内表层的残余应力的精确测量问题，丰富了Ｓａｃｈｓ内剥层法的内容，机械法打中心孔，热处理前打中心孔，空心辊表淬前改变温度场的方法可降低残余应力值，后者降低残余应力的效果尤为显著。     

Effects of crack size and weld metal mismatch on the has cleavage toughness of wide plates

The heat affect zone (HAZ) is in many cases considered to be the most critical part of a weldment. In this paper, the effect of crack size and weld metal mismatch on the HAZ cleavage toughness of wide plate specimens with X-groove has been investigated by the J-Q-M theories and a simple micromechanism for cleavage fracture. Two crack sizes have been studied (a/w = 0.1 and 0.3). In the analyses, the HAZ yield strength is assumed to be higher than the base metal. For each crack size, weld metal local overmatch and local evenmatch with respect to the HAZ are considered. For a given global strain, the results indicate that weld metal overmatch and evenmatch yield the same crack tip loading in terms of J-integral for a/w = 0.3. For a/w = 0.1, overmatch gives lower crack tip loading than evenmatch. For a given crack tip loading, weld metal local evenmatch in general results in less effective crack tip loading than the overmatch. Overmatch is detrimental to HAZ toughness, but this detrimental effect becomes less significant when the crack size decreases.     

石灰竖窑工作衬砖蚀损机理的探讨

阐述了石灰竖窑的预热带、煅烧带和冷却带工作衬砖蚀损机理，并讨论了如何根据耐火砖性能和石灰竖窑不同区域的蚀损机理，选择耐火材料。     

超高纯铜的制备方法和应用

简要介绍了超高纯铜(UHPC)的几种精炼方法，以及它在工业方面的应用。并对超高纯铜的研究开发趋势及应用前景进行了展望。     

10000m^3天然气球罐用WEL—TEN610CF钢焊接冷裂纹敏感性

WEL-TEN610CF钢是日本新日铁公司生产的低裂纹敏感性高强钢,结合我国首台国产化10 000 m3天然气球罐用37 mm厚WEL-TEN610CF钢焊接性试验研究,对该钢焊接冷裂纹敏感性进行了综合评定,为其焊接工艺的制订提供了可靠的依据。     

Carbohydrate content of potato (Solanum tuberosum L.) tubers treated with Isopropyl-N (3-chlorophenyl) carbamate under different storage conditions

Post harvest application of Isopropyl-N (3-chlorophenyl) carbamate considerably reduced the degradation of starch when potato tubers were stored in an evaporative cooling chamber. The starch degraded at a faster rate when tubers were kept under refrigerated and room storage conditions.     

黄河口凹陷渤中34-1复杂断块区构造特征及储层预测

渤中34-1浅层复杂断块区处于邦庐走滑断裂带内,受其影响和控制该区断层较发育.根据新近系发育的断层走向,可将其划分为两套断层组合:NE向断层组合和NW向断层组合.其中NE向断层组合为走滑断裂右行扭动拉张分量作用下产生的一系列正断层,与长期活动的主断层形成"Y"字型组合,是油气运移的主要通道;NW向断层组合为走滑断层右行扭动应力作用下形成的一系列压扭性断层,具有较好的封堵性,有利于油气的聚集和保存.该区主要含油气层位明化镇组下段为厚层泥岩夹砂岩的浅水河控三角洲和曲流河沉积环境,砂岩储层在地震剖面上表现为强反射,依据振幅、能量等属性可较好地预测储层.由于该区域存在两种不同采集方式的三维地震区,为了消除单属性预测储层的不足,采用了多参数聚类分析的方法,获得了比较好的效果.